@@ -1252,6 +1252,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
hird_threshold = 12;
dwc->maximum_speed = usb_get_maximum_speed(dev);
+ dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
@@ -1423,6 +1424,42 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
break;
}
+
+ /*
+ * Currently the controller does not have visibility into the HW
+ * parameter to determine the maximum number of lanes the HW supports.
+ * If the number of lanes is not specified in the device property, then
+ * set the default to support dual-lane for DWC_usb32 and single-lane
+ * for DWC_usb31 for super-speed-plus.
+ */
+ if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) {
+ switch (dwc->max_ssp_rate) {
+ case USB_SSP_GEN_2x1:
+ if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_GEN1)
+ dev_warn(dev, "UDC only supports Gen 1\n");
+ break;
+ case USB_SSP_GEN_1x2:
+ case USB_SSP_GEN_2x2:
+ if (DWC3_IP_IS(DWC31))
+ dev_warn(dev, "UDC only supports single lane\n");
+ break;
+ case USB_SSP_GEN_UNKNOWN:
+ default:
+ switch (hwparam_gen) {
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
+ if (DWC3_IP_IS(DWC32))
+ dwc->max_ssp_rate = USB_SSP_GEN_2x2;
+ else
+ dwc->max_ssp_rate = USB_SSP_GEN_2x1;
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+ if (DWC3_IP_IS(DWC32))
+ dwc->max_ssp_rate = USB_SSP_GEN_1x2;
+ break;
+ }
+ break;
+ }
+ }
}
static int dwc3_probe(struct platform_device *pdev)
@@ -964,6 +964,7 @@ struct dwc3_scratchpad_array {
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
+ * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count
* @ip: controller's ID
* @revision: controller's version of an IP
* @version_type: VERSIONTYPE register contents, a sub release of a revision
@@ -1127,6 +1128,7 @@ struct dwc3 {
u32 u1u2;
u32 maximum_speed;
u32 gadget_max_speed;
+ enum usb_ssp_rate max_ssp_rate;
u32 ip;
@@ -3889,6 +3889,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->revision);
dwc->gadget->max_speed = dwc->maximum_speed;
+ dwc->gadget->max_ssp_rate = dwc->max_ssp_rate;
/*
* REVISIT: Here we should clear all pending IRQs to be
The DWC_usb32 controller supports dual-lane SuperSpeed Plus. Check the maximum_speed property for any limitation in the HW to initialize and validate the maximum number of lanes and speed the device will operate. Currently the controller has no visibility into the HW parameter to determine the maximum number of lanes the HW supports. If the number of lanes is not specified for SSP, then set the default rate to gen2x2 for DWC_usb32 and gen2x1 for DWC_usb31. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- Changes in v6: - Rebase on Greg's usb-testing branch - Update to check for lane count and gen# via usb_ssp_rate enum - Update commit message Changes in v5: - Rebase on Felipe's testing/next branch - Changed Signed-off-by email to match From: email header Changes in v4: - Use new common funtions to get SSP Gen and number of lanes Changes in v3: - Use new common function to get maximum-speed - Remove num_lanes and lsm validation since they are no longer separate properties - Replace dwc->maxmum_lsm field with dwc->maximum_ssp_rate for gen1/gen2 Changes in v2: - Use common functions to get num_lanes and lsm properties drivers/usb/dwc3/core.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 1 + 3 files changed, 40 insertions(+)