diff mbox series

[v2,6/7] usb: xhci: Workaround lost disconnect port status

Message ID a90cfd8e3008c3664a916a12dc3c0a79a520c0ab.1618014279.git.Thinh.Nguyen@synopsys.com
State New
Headers show
Series usb: Set quirks for xhci/dwc3 host mode | expand

Commit Message

Thinh Nguyen April 10, 2021, 12:47 a.m. UTC
If an eSS device with active periodic transfers is disconnected from the
DWC_usb31 (v1.90a and prior) host controller at root port, the host
controller may not detect a disconnection. By active transfers, it
means that the endpoint is not in flow control, and there are active
Transfer Descriptors available for the host to initiate transfers to the
endpoint. This issue can occur if the endpoint periodic interval is in
2ms, 4ms, or 8ms.

In addition, the host controller will not be able to detect a new device
connection while the disconnection is not processed. The controller will
set the link state of the affected port to eSS_INACTIVE.

To workaround this, have the xHCI driver polls for the eSS root port
status every 2 seconds. If eSS_INACTIVE state is detected, initiate a
fake connection change to stop all the active endpoints and start
polling for new connection change.

Since XHCI_COMP_MODE_QUIRK is basically doing the same thing except for
polling for a different link state, we will use the same timer and
polling rate for this new workaround. Introduce a new quirk
XHCI_LOST_DISCONNECT_QUIRK to poll for eSS_INACTIVE port link state and
fake a connection change.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
 Changes in v2:
 - None

 drivers/usb/host/xhci-hub.c     | 10 +++++++-
 drivers/usb/host/xhci.c         | 44 ++++++++++++++++++++++++---------
 include/linux/usb/xhci-quirks.h |  1 +
 3 files changed, 42 insertions(+), 13 deletions(-)

Comments

Mathias Nyman April 28, 2021, 1:48 p.m. UTC | #1
On 10.4.2021 3.47, Thinh Nguyen wrote:
> If an eSS device with active periodic transfers is disconnected from the

> DWC_usb31 (v1.90a and prior) host controller at root port, the host

> controller may not detect a disconnection. By active transfers, it

> means that the endpoint is not in flow control, and there are active

> Transfer Descriptors available for the host to initiate transfers to the

> endpoint. This issue can occur if the endpoint periodic interval is in

> 2ms, 4ms, or 8ms.

> 

> In addition, the host controller will not be able to detect a new device

> connection while the disconnection is not processed. The controller will

> set the link state of the affected port to eSS_INACTIVE.

> 

> To workaround this, have the xHCI driver polls for the eSS root port

> status every 2 seconds. If eSS_INACTIVE state is detected, initiate a

> fake connection change to stop all the active endpoints and start

> polling for new connection change.



If this only happens with active periodic transfers can we skip the polling
and check port link state in the transfer error event handling?

Like in the previous case there the periodic device was behind a hub.

-Mathias
Thinh Nguyen April 29, 2021, 1 a.m. UTC | #2
Mathias Nyman wrote:
> On 10.4.2021 3.47, Thinh Nguyen wrote:

>> If an eSS device with active periodic transfers is disconnected from the

>> DWC_usb31 (v1.90a and prior) host controller at root port, the host

>> controller may not detect a disconnection. By active transfers, it

>> means that the endpoint is not in flow control, and there are active

>> Transfer Descriptors available for the host to initiate transfers to the

>> endpoint. This issue can occur if the endpoint periodic interval is in

>> 2ms, 4ms, or 8ms.

>>

>> In addition, the host controller will not be able to detect a new device

>> connection while the disconnection is not processed. The controller will

>> set the link state of the affected port to eSS_INACTIVE.

>>

>> To workaround this, have the xHCI driver polls for the eSS root port

>> status every 2 seconds. If eSS_INACTIVE state is detected, initiate a

>> fake connection change to stop all the active endpoints and start

>> polling for new connection change.

> 

> 

> If this only happens with active periodic transfers can we skip the polling

> and check port link state in the transfer error event handling?

> 

> Like in the previous case there the periodic device was behind a hub.

> 


No, this occurs with an application with interrupt endpoint (but also
affects isoc). We may not get a transfer completion event to notify to
check for port link state. I hope this change is not too intrusive since
we can reuse a timer polling for port status.

Thanks,
Thinh
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 8bfafbd680ab..32fbf95f021b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -868,6 +868,11 @@  static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
 		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
 				(pls == USB_SS_PORT_LS_COMP_MOD))
 			pls |= USB_PORT_STAT_CONNECTION;
+
+		/* Fake a connection change */
+		if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) &&
+				pls == XDEV_INACTIVE)
+			pls |= USB_PORT_STAT_CONNECTION;
 	}
 
 	/* update status field */
@@ -887,7 +892,8 @@  static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
 	u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1);
 	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
 
-	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK) ||
+	    (xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK))
 		return;
 
 	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
@@ -1654,6 +1660,8 @@  int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 		trace_xhci_hub_status_data(i, temp);
 
 		if ((temp & mask) != 0 ||
+			((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) &&
+				(temp & PORT_PLS_MASK) == XDEV_INACTIVE) ||
 			(bus_state->port_c_suspend & 1 << i) ||
 			(bus_state->resume_done[i] && time_after_eq(
 			    jiffies, bus_state->resume_done[i]))) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1b3d1063f6b..62275ee88849 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -485,10 +485,14 @@  static void port_check(struct timer_list *t)
 
 	xhci = from_timer(xhci, t, port_check_timer);
 	rhub = &xhci->usb3_rhub;
+	hcd = xhci->shared_hcd;
 
 	for (i = 0; i < rhub->num_ports; i++) {
+		bool poll_rhub = false;
+
 		temp = readl(rhub->ports[i]->addr);
-		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+		    ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD)) {
 			/*
 			 * Compliance Mode Detected. Letting USB Core
 			 * handle the Warm Reset
@@ -498,8 +502,15 @@  static void port_check(struct timer_list *t)
 					i + 1);
 			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 					"Attempting compliance mode recovery");
-			hcd = xhci->shared_hcd;
 
+			poll_rhub = true;
+		}
+
+		if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) &&
+		    ((temp & PORT_PLS_MASK) == XDEV_INACTIVE))
+			poll_rhub = true;
+
+		if (poll_rhub) {
 			if (hcd->state == HC_STATE_SUSPENDED)
 				usb_hcd_resume_root_hub(hcd);
 
@@ -507,7 +518,9 @@  static void port_check(struct timer_list *t)
 		}
 	}
 
-	if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1))
+	if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) ||
+	    ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+	     xhci->port_status_u0 != ((1 << rhub->num_ports) - 1)))
 		mod_timer(&xhci->port_check_timer,
 			jiffies + msecs_to_jiffies(PORT_CHECK_MSECS));
 }
@@ -593,10 +606,12 @@  static int xhci_init(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
 
 	/* Initializing Compliance Mode Recovery Data If Needed */
-	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
+	if (xhci_compliance_mode_recovery_timer_quirk_check())
 		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+
+	if (xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK ||
+	    xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		port_check_timer_init(xhci);
-	}
 
 	return retval;
 }
@@ -736,8 +751,9 @@  static void xhci_stop(struct usb_hcd *hcd)
 	xhci_cleanup_msix(xhci);
 
 	/* Deleting Compliance Mode Recovery Timer */
-	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
-			(!(xhci_all_ports_seen_u0(xhci)))) {
+	if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) ||
+	    ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+	     !(xhci_all_ports_seen_u0(xhci)))) {
 		del_timer_sync(&xhci->port_check_timer);
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"%s: port check timer deleted", __func__);
@@ -1058,8 +1074,9 @@  int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	 * Deleting Port Check Timer because the xHCI Host
 	 * is about to be suspended.
 	 */
-	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
-			(!(xhci_all_ports_seen_u0(xhci)))) {
+	if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) ||
+	    ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+	     !(xhci_all_ports_seen_u0(xhci)))) {
 		del_timer_sync(&xhci->port_check_timer);
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"%s: port check timer deleted", __func__);
@@ -1145,8 +1162,9 @@  int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
 
-		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
-				!(xhci_all_ports_seen_u0(xhci))) {
+		if ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) ||
+		    ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+		     !(xhci_all_ports_seen_u0(xhci)))) {
 			del_timer_sync(&xhci->port_check_timer);
 			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Port Check Timer deleted!");
@@ -1247,7 +1265,9 @@  int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 * to suffer the Compliance Mode issue again. It doesn't matter if
 	 * ports have entered previously to U0 before system's suspension.
 	 */
-	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
+	if (!comp_timer_running &&
+	    ((xhci->quirks & XHCI_LOST_DISCONNECT_QUIRK) ||
+	     (xhci->quirks & XHCI_COMP_MODE_QUIRK)))
 		port_check_timer_init(xhci);
 
 	if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
diff --git a/include/linux/usb/xhci-quirks.h b/include/linux/usb/xhci-quirks.h
index 5bedf5a25f7a..df92e78b8083 100644
--- a/include/linux/usb/xhci-quirks.h
+++ b/include/linux/usb/xhci-quirks.h
@@ -60,5 +60,6 @@ 
 #define XHCI_NO_SOFT_RETRY		BIT_ULL(40)
 #define XHCI_ISOC_BLOCKED_DISCONNECT	BIT_ULL(41)
 #define XHCI_LIMIT_FS_BI_INTR_EP	BIT_ULL(42)
+#define XHCI_LOST_DISCONNECT_QUIRK	BIT_ULL(43)
 
 #endif /* __LINUX_USB_XHCI_QUIRKS_H */