diff mbox series

[v3,3/3] riscv: dts: spacemit: add usb3.0 support for K1

Message ID 20250518-b4-k1-dwc3-v3-v3-3-7609c8baa2a6@whut.edu.cn
State New
Headers show
Series [v3,1/3] dt-bindings: usb: dwc3: add support for SpacemiT K1 | expand

Commit Message

Ze Huang May 17, 2025, 7:19 p.m. UTC 
Add USB 3.0 support for the SpacemiT K1 SoC, including the
following components:

- USB 2.0 PHY nodes
- USB 3.0 combo PHY node
- USB 3.0 host controller
- USB 3.0 hub and vbus regulator (usb3_vhub, usb3_vbus)
- DRAM interconnect node for USB DMA ("dma-mem")

The `usb3_vbus` and `usb3_vhub` regulator node provides a fixed 5V
supply to power the onboard USB 3.0 hub and usb vbus.

On K1, some DMA transfers from devices to memory use separate buses with
different DMA address translation rules from the parent node. We express
this relationship through the interconnects node "dma-mem", similar to [1].

Link: https://lore.kernel.org/all/09e5e29a4c54ec7337e4e62e5d6001b69d92b103.1554108995.git-series.maxime.ripard@bootlin.com [1]

Signed-off-by: Ze Huang <huangze@whut.edu.cn>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 50 ++++++++++++++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 69 +++++++++++++++++++++++++
 2 files changed, 119 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 816ef1bc358ec490aff184d5915d680dbd9f00cb..c5832b399f96b6bbede02fbb019c7b616cedff77 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -28,6 +28,25 @@  led1 {
 			default-state = "on";
 		};
 	};
+
+	usb3_vhub: regulator-vhub-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "USB30_VHUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio K1_GPIO(123) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb3_vbus: regulator-vbus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "USB30_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio K1_GPIO(97) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &uart0 {
@@ -35,3 +54,34 @@  &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	status = "okay";
 };
+
+&usbphy2 {
+	status = "okay";
+};
+
+&combphy {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	vbus-supply = <&usb3_vbus>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb2109,2817";
+		reg = <0x1>;
+		vdd-supply = <&usb3_vhub>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio K1_GPIO(124) GPIO_ACTIVE_LOW>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb2109,817";
+		reg = <0x1>;
+		vdd-supply = <&usb3_vhub>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio K1_GPIO(124) GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 61f5ca250ded0da7b91cd4bbd55a5574a89c6ab0..164244fdb49f5d50a8abadb7b7e478cccc828087 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -4,6 +4,8 @@ 
  */
 
 #include <dt-bindings/clock/spacemit,k1-syscon.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
 
 /dts-v1/;
 / {
@@ -346,6 +348,15 @@  soc {
 		dma-noncoherent;
 		ranges;
 
+		mbus0: dram-controller@0 {
+			reg = <0x0 0x00000000 0x0 0x80000000>;
+			reg-names = "dram";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+			#interconnect-cells = <0>;
+		};
+
 		syscon_rcpu: system-controller@c0880000 {
 			compatible = "spacemit,k1-syscon-rcpu";
 			reg = <0x0 0xc0880000 0x0 0x2048>;
@@ -358,6 +369,64 @@  syscon_rcpu2: system-controller@c0888000 {
 			#reset-cells = <1>;
 		};
 
+		usb_dwc3: usb@c0a00000 {
+			compatible = "spacemit,k1-dwc3";
+			reg = <0x0 0xc0a00000 0x0 0x10000>;
+			clocks = <&syscon_apmu CLK_USB30>;
+			clock-names = "usbdrd30";
+			resets = <&syscon_apmu RESET_USB3_0>;
+			interrupt-parent = <&plic>;
+			interrupts = <125>;
+			interconnects = <&mbus0>;
+			interconnect-names = "dma-mem";
+			phys = <&usbphy2>, <&combphy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			dr_mode = "host";
+			phy_type = "utmi";
+			snps,hsphy_interface = "utmi";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_rxdet_inp3_quirk;
+			status = "disabled";
+		};
+
+		usbphy0: phy@c0940000 {
+			compatible = "spacemit,k1-usb2-phy";
+			reg = <0x0 0xc0940000 0x0 0x200>;
+			clocks = <&syscon_apmu CLK_USB_AXI>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usbphy1: phy@c09c0000 {
+			compatible = "spacemit,k1-usb2-phy";
+			reg = <0x0 0xc09c0000 0x0 0x200>;
+			clocks = <&syscon_apmu CLK_USB_P1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usbphy2: phy@c0a30000 {
+			compatible = "spacemit,k1-usb2-phy";
+			reg = <0x0 0xc0a30000 0x0 0x200>;
+			clocks = <&syscon_apmu CLK_USB30>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		combphy: phy@c0b10000 {
+			compatible = "spacemit,k1-combphy";
+			reg = <0x0 0xc0b10000 0x0 0x800>,
+			      <0x0 0xd4282910 0x0 0x400>;
+			reg-names = "ctrl", "sel";
+			resets = <&syscon_apmu RESET_PCIE0>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		syscon_apbc: system-control@d4015000 {
 			compatible = "spacemit,k1-syscon-apbc";
 			reg = <0x0 0xd4015000 0x0 0x1000>;