@@ -1420,11 +1420,25 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
udev->state == USB_STATE_SUSPENDED)
goto done;
+ if (msg.event == PM_EVENT_SUSPEND && usb_offload_check(udev)) {
+ dev_dbg(&udev->dev, "device offload active, skip suspend.\n");
+ udev->offload_at_suspend = 1;
+ }
+
/* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
n = udev->actconfig->desc.bNumInterfaces;
for (i = n - 1; i >= 0; --i) {
intf = udev->actconfig->interface[i];
+ /*
+ * Don't suspend interfaces with remote wakeup while the controller is
+ * active. This preserves pending interrupt urbs, allowing interrupt
+ * events to be handled during system suspend.
+ */
+ if (udev->offload_at_suspend && intf->needs_remote_wakeup) {
+ dev_dbg(&intf->dev, "active interface on offloaded devices\n");
+ continue;
+ }
status = usb_suspend_interface(udev, intf, msg);
/* Ignore errors during system sleep transitions */
@@ -1435,7 +1449,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
}
}
if (status == 0) {
- status = usb_suspend_device(udev, msg);
+ if (!udev->offload_at_suspend)
+ status = usb_suspend_device(udev, msg);
/*
* Ignore errors from non-root-hub devices during
@@ -1480,9 +1495,11 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
*/
} else {
udev->can_submit = 0;
- for (i = 0; i < 16; ++i) {
- usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
- usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+ if (!udev->offload_at_suspend) {
+ for (i = 0; i < 16; ++i) {
+ usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+ usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+ }
}
}
@@ -1524,17 +1541,31 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
udev->can_submit = 1;
/* Resume the device */
- if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume)
- status = usb_resume_device(udev, msg);
+ if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume) {
+ if (!udev->offload_at_suspend)
+ status = usb_resume_device(udev, msg);
+ else
+ dev_dbg(&udev->dev, "device offload active, skip resume.\n");
+ }
/* Resume the interfaces */
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
+ /*
+ * Interfaces with remote wakeup aren't suspended while the controller is
+ * active. This preserves pending interrupt urbs, allowing interrupt
+ * events to be handled during system suspend.
+ */
+ if (udev->offload_at_suspend && intf->needs_remote_wakeup) {
+ dev_dbg(&intf->dev, "active interface on offloaded devices\n");
+ continue;
+ }
usb_resume_interface(udev, intf, msg,
udev->reset_resume);
}
}
+ udev->offload_at_suspend = 0;
usb_mark_last_busy(udev);
done:
@@ -20,6 +20,7 @@
#include <linux/acpi.h>
#include <linux/usb/of.h>
#include <linux/reset.h>
+#include <linux/usb/xhci-sideband.h>
#include "xhci.h"
#include "xhci-plat.h"
@@ -483,6 +484,15 @@ static int xhci_plat_suspend_common(struct device *dev)
static int xhci_plat_suspend(struct device *dev)
{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ if (xhci_sideband_check(hcd)) {
+ priv->sideband_at_suspend = 1;
+ dev_dbg(dev, "sideband instance active, skip suspend.\n");
+ return 0;
+ }
+
return xhci_plat_suspend_common(dev);
}
@@ -535,6 +545,15 @@ static int xhci_plat_resume_common(struct device *dev, bool power_lost)
static int xhci_plat_resume(struct device *dev)
{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ if (priv->sideband_at_suspend) {
+ priv->sideband_at_suspend = 0;
+ dev_dbg(dev, "sideband instance active, skip resume.\n");
+ return 0;
+ }
+
return xhci_plat_resume_common(dev, false);
}
@@ -15,6 +15,7 @@ struct usb_hcd;
struct xhci_plat_priv {
const char *firmware_name;
unsigned long long quirks;
+ unsigned sideband_at_suspend:1;
bool power_lost;
void (*plat_start)(struct usb_hcd *);
int (*init_quirk)(struct usb_hcd *);
@@ -648,6 +648,7 @@ struct usb3_lpm_parameters {
* Will be used as wValue for SetIsochDelay requests.
* @use_generic_driver: ask driver core to reprobe using the generic driver.
* @offload_usage: number of offload activities happening on this usb device.
+ * @offload_at_suspend: offload activities during suspend is enabled.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -736,6 +737,7 @@ struct usb_device {
unsigned use_generic_driver:1;
refcount_t offload_usage;
+ unsigned offload_at_suspend:1;
};
#define to_usb_device(__dev) container_of_const(__dev, struct usb_device, dev)
Sharing a USB controller with another entity via xhci-sideband driver creates power management complexities. To prevent the USB controller from being inadvertently deactivated while in use by the other entity, a usage-count based mechanism is implemented. This allows the system to manage power effectively, ensuring the controller remains available whenever needed. In order to maintain full functionality of an offloaded USB devices, several changes are made within the suspend flow of such devices: - skip usb_suspend_device() so that the port/hub are still active for USB transfers via offloaded path. - not suspending the endpoints which are used by USB interfaces marked with needs_remote_wakeup. Namely, skip usb_suspend_interface() and usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a pending interrupt urb during system suspend for handling the interrupt transfer, which is necessary since remote wakeup doesn't apply in the offloaded USB devices when controller is still active. - not flushing the endpoints of actively offloaded USB devices. Given that the USB devices is used by another entity, unilaterally flush the endpoint might lead to unexpected behavior on another entity. - not suspending the xhci controller. This is done by skipping the suspend/resume callbacks in the xhci platform driver. Signed-off-by: Guan-Yu Lin <guanyulin@google.com> --- drivers/usb/core/driver.c | 43 +++++++++++++++++++++++++++++++----- drivers/usb/host/xhci-plat.c | 19 ++++++++++++++++ drivers/usb/host/xhci-plat.h | 1 + include/linux/usb.h | 2 ++ 4 files changed, 59 insertions(+), 6 deletions(-)