From patchwork Sat May 25 18:04:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bjorn Andersson X-Patchwork-Id: 799064 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DA8F812EBC4; Sat, 25 May 2024 17:59:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716659960; cv=none; b=hapnOFyQYdRuAa1oCsxUBrMVG/31MzRWdRjHfSF2hnYdGKNRMAmypmjzRqd6uLEkRepcKMj2odQQYAcf+E0Izu42WGe5kPC9HxLDsmeu9TvPEd0kFOVqsgcBbbBjli2dBbrR+nqywL328DtDGYJklkKrUX2pBtmT5O0ebezLnpg= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1716659960; c=relaxed/simple; bh=fT5H+9k0dKw7ylUnpXt7G6BQhfF1fStNR237iT1CHY8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=UnwMRj53i9ZAec80zJ8PPxkrf1mKUm8wXxMq08Yrdu5iv4YBFF5fIwuuxx1LSOyyHLu0KTesmhfuB8jR2RXu8v/EdjIHUlLa3vST9uO4L8rUlJ+shI21P0AQxOJaVhG7A+8ni4V1Grsx2UrRr9gRWCgekQgBxDf0Gr6IX2cjPoI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=o02yb0UK; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="o02yb0UK" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 99111C2BD11; Sat, 25 May 2024 17:59:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1716659959; bh=fT5H+9k0dKw7ylUnpXt7G6BQhfF1fStNR237iT1CHY8=; h=From:Date:Subject:References:In-Reply-To:To:Cc:From; b=o02yb0UKPRXZxFxcEHmh8tMsjOm6BiAvD/893mJ893f/ZwQEyIIau/DS+CM1pEfTd nC56c9jwM9H32u2z93g5C6AeMQ7WX8SQJ85s1PBkaG+eZwHo1jaiOjKr5Xs7Uxg2LX xGM3XdwPn09hPoa8b3tpiLELe/tnrZOp4/hogknJrs2zU7bbInV4x1lWm3Z+opstA1 W6ZIFS3TnEZwRe/ej6iaLFWAFtGcieHQTqHLH47jAMn3S3XAM2OiNpT9jjqTIbapRd Jy0Z6jRcu/vlLWObrEq5nL/cBpOJ/HlBnHfm4PsOspalGeaGVSdJhWo63oF5ybJ2/U Ac4FSx7aQVJqQ== From: Bjorn Andersson Date: Sat, 25 May 2024 11:04:01 -0700 Subject: [PATCH 08/10] arm64: dts: qcom: sc8180x: Add USB MP controller and phys Precedence: bulk X-Mailing-List: linux-usb@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240525-sc8180x-usb-mp-v1-8-60a904392438@quicinc.com> References: <20240525-sc8180x-usb-mp-v1-0-60a904392438@quicinc.com> In-Reply-To: <20240525-sc8180x-usb-mp-v1-0-60a904392438@quicinc.com> To: Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bjorn Andersson , Michael Turquette , Stephen Boyd , Greg Kroah-Hartman , Wesley Cheng , Konrad Dybcio Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-usb@vger.kernel.org, Bjorn Andersson X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=5451; i=quic_bjorande@quicinc.com; h=from:subject:message-id; bh=9MKZGUklgYXdQmJb0Ci7E4C65gPkhylXhTIui5TVewU=; b=owEBgwJ8/ZANAwAIAQsfOT8Nma3FAcsmYgBmUigMg+OuqInwHR3RI2Cbb/opRwyNFctoxU0Lg lxkKpgSqVKJAkkEAAEIADMWIQQF3gPMXzXqTwlm1SULHzk/DZmtxQUCZlIoDBUcYW5kZXJzc29u QGtlcm5lbC5vcmcACgkQCx85Pw2ZrcWfsBAAriYmGV1MSfQ406DVeil3lKzAMNUvyEzswoSUrjA H1OvR34xU/YVI6XR2dhoK/2fQLLu+eAPCrJkYP2fl+sZQ9NlA0wKhIW7mmn2+/eFooE9w9y6Yo1 wUg58YMdagu6B0Vwlv81uAn6ZMq3rrPfPArGwSE1IuOxlMsZU22kL2W92tJpNTqeDH+ji2usSr9 CS9KhDso0t8c4yHtoD/IRlJ9LqsTu0vbivKqRg/dFsqybAVCPF3fjL+QJRU/q39NfxwCti+r1uL 0CYjXXbL59FaSTyRgmlJ4ZemOESoiomy6jlkokZDjDaB8Mwilu98jimWeoq3dUXK4br4p8m6GMG ayC+4lCgtPX7NNLGhNJ+ysR/0RrT1bBdqJ2HSToXG+M89fjZqdBujar8L0EQZEULGRmbfUFFd7J pH0s0JyU8HeybUnm7gdF6Dx+eUzM1vsgvYg9FTzGRXjHuqF0dFA1cdsWjYL11AJi31p1x24DBdK ZRZWB9WEmJdF0GkYNXKy8lx6qE5889QmDNQ7eQgwjgSL1Jj+r1KAEIBvmnXbi0OR31c+FgRm5TM +aGKjbPKSGdy3Hf8NpQ9nVUbwZiN2/QYOZaURLPHnH/OnQ+7UQaUxC82q5ZSo3vEaw2hhMS5ZMG SL9um5RxXSPNJ9G4lVRUakJ134C80m7MDk7Q3MWbUzTU= X-Developer-Key: i=quic_bjorande@quicinc.com; a=openpgp; fpr=05DE03CC5F35EA4F0966D5250B1F393F0D99ADC5 From: Bjorn Andersson The SC8180X platform comes with a multiport DWC3 controller with two ports, each connected to a pair of HighSpeed and QMP SuperSpeed PHYs. Describe these blocks. Signed-off-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 146 ++++++++++++++++++++++++++++++++++ 1 file changed, 146 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 9ef3fa40e1d8..0950dc7adb20 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2511,6 +2511,34 @@ usb_sec_hsphy: phy@88e3000 { status = "disabled"; }; + usb_mp0_hsphy: phy@88e4000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_MP0_BCR>; + + status = "disabled"; + }; + + usb_mp1_hsphy: phy@88e5000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e5000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_MP1_BCR>; + + status = "disabled"; + }; + usb_prim_qmpphy: phy@88e9000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, @@ -2577,6 +2605,54 @@ usb_prim_dpphy: dp-phy@88ea200 { }; }; + usb_mp0_qmpphy: phy@88eb000 { + compatible = "qcom,sc8180x-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x1000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp1_qmpphy: phy@88ec000 { + compatible = "qcom,sc8180x-qmp-usb3-uni-phy"; + reg = <0 0x088ec000 0 0x1000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_sec_qmpphy: phy@88ee000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088ee000 0 0x18c>, @@ -2662,6 +2738,76 @@ gem_noc: interconnect@9680000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_mp: usb@a4f8800 { + compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 59 IRQ_TYPE_EDGE_BOTH>, + <&pdc 46 IRQ_TYPE_EDGE_BOTH>, + <&pdc 71 IRQ_TYPE_EDGE_BOTH>, + <&pdc 68 IRQ_TYPE_EDGE_BOTH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event_1", "pwr_event_2", + "hs_phy_1", "hs_phy_2", + "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "ss_phy_1", "ss_phy_2"; + + power-domains = <&gcc USB30_MP_GDSC>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + status = "disabled"; + + usb_mp_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x60 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_mp0_hsphy>, + <&usb_mp0_qmpphy>, + <&usb_mp1_hsphy>, + <&usb_mp1_qmpphy>; + phy-names = "usb2-0", + "usb3-0", + "usb2-1", + "usb3-1"; + dr_mode = "host"; + }; + }; + usb_prim: usb@a6f8800 { compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>;