diff mbox series

[v21,2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info

Message ID 20240420044901.884098-3-quic_kriskura@quicinc.com
State New
Headers show
Series Add multiport support for DWC3 controllers | expand

Commit Message

Krishna Kurapati April 20, 2024, 4:48 a.m. UTC
All DWC3 Multi Port controllers that exist today only support host mode.
Temporarily map XHCI address space for host-only controllers and parse
XHCI Extended Capabilities registers to read number of usb2 ports and
usb3 ports present on multiport controller. Each USB Port is at least HS
capable.

The port info for usb2 and usb3 phy are identified as num_usb2_ports
and num_usb3_ports and these are used as iterators for phy operations
and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  5 ++++
 2 files changed, 66 insertions(+)

Comments

Johan Hovold April 22, 2024, 6:56 a.m. UTC | #1
On Sat, Apr 20, 2024 at 10:18:54AM +0530, Krishna Kurapati wrote:
> All DWC3 Multi Port controllers that exist today only support host mode.
> Temporarily map XHCI address space for host-only controllers and parse
> XHCI Extended Capabilities registers to read number of usb2 ports and
> usb3 ports present on multiport controller. Each USB Port is at least HS
> capable.
> 
> The port info for usb2 and usb3 phy are identified as num_usb2_ports
> and num_usb3_ports and these are used as iterators for phy operations
> and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Thinh Nguyen April 24, 2024, 1:11 a.m. UTC | #2
On Sat, Apr 20, 2024, Krishna Kurapati wrote:
> All DWC3 Multi Port controllers that exist today only support host mode.
> Temporarily map XHCI address space for host-only controllers and parse
> XHCI Extended Capabilities registers to read number of usb2 ports and
> usb3 ports present on multiport controller. Each USB Port is at least HS
> capable.
> 
> The port info for usb2 and usb3 phy are identified as num_usb2_ports
> and num_usb3_ports and these are used as iterators for phy operations
> and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>  drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h |  5 ++++
>  2 files changed, 66 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 637194af506f..38fcf530332f 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -39,6 +39,7 @@
>  #include "io.h"
>  
>  #include "debug.h"
> +#include "../host/xhci-ext-caps.h"
>  
>  #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>  
> @@ -1884,10 +1885,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
>  	return 0;
>  }
>  
> +static int dwc3_get_num_ports(struct dwc3 *dwc)
> +{
> +	void __iomem *base;
> +	u8 major_revision;
> +	u32 offset;
> +	u32 val;
> +
> +	/*
> +	 * Remap xHCI address space to access XHCI ext cap regs since it is
> +	 * needed to get information on number of ports present.
> +	 */
> +	base = ioremap(dwc->xhci_resources[0].start,
> +		       resource_size(&dwc->xhci_resources[0]));
> +	if (!base)
> +		return -ENOMEM;
> +
> +	offset = 0;
> +	do {
> +		offset = xhci_find_next_ext_cap(base, offset,
> +						XHCI_EXT_CAPS_PROTOCOL);
> +		if (!offset)
> +			break;
> +
> +		val = readl(base + offset);
> +		major_revision = XHCI_EXT_PORT_MAJOR(val);
> +
> +		val = readl(base + offset + 0x08);
> +		if (major_revision == 0x03) {
> +			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
> +		} else if (major_revision <= 0x02) {
> +			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
> +		} else {
> +			dev_warn(dwc->dev, "unrecognized port major revision %d\n",
> +				 major_revision);
> +		}
> +	} while (1);
> +
> +	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
> +		dwc->num_usb2_ports, dwc->num_usb3_ports);
> +
> +	iounmap(base);
> +
> +	return 0;
> +}
> +
>  static int dwc3_probe(struct platform_device *pdev)
>  {
>  	struct device		*dev = &pdev->dev;
>  	struct resource		*res, dwc_res;
> +	unsigned int		hw_mode;
>  	void __iomem		*regs;
>  	struct dwc3		*dwc;
>  	int			ret;
> @@ -1971,6 +2018,20 @@ static int dwc3_probe(struct platform_device *pdev)
>  			goto err_disable_clks;
>  	}
>  
> +	/*
> +	 * Currently only DWC3 controllers that are host-only capable
> +	 * can have more than one port.
> +	 */
> +	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
> +		ret = dwc3_get_num_ports(dwc);
> +		if (ret)
> +			goto err_disable_clks;
> +	} else {
> +		dwc->num_usb2_ports = 1;
> +		dwc->num_usb3_ports = 1;
> +	}
> +
>  	spin_lock_init(&dwc->lock);
>  	mutex_init(&dwc->mutex);
>  
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 7e80dd3d466b..341e4c73cb2e 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1039,6 +1039,8 @@ struct dwc3_scratchpad_array {
>   * @usb3_phy: pointer to USB3 PHY
>   * @usb2_generic_phy: pointer to USB2 PHY
>   * @usb3_generic_phy: pointer to USB3 PHY
> + * @num_usb2_ports: number of USB2 ports
> + * @num_usb3_ports: number of USB3 ports
>   * @phys_ready: flag to indicate that PHYs are ready
>   * @ulpi: pointer to ulpi interface
>   * @ulpi_ready: flag to indicate that ULPI is initialized
> @@ -1187,6 +1189,9 @@ struct dwc3 {
>  	struct phy		*usb2_generic_phy;
>  	struct phy		*usb3_generic_phy;
>  
> +	u8			num_usb2_ports;
> +	u8			num_usb3_ports;
> +
>  	bool			phys_ready;
>  
>  	struct ulpi		*ulpi;
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 637194af506f..38fcf530332f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -39,6 +39,7 @@ 
 #include "io.h"
 
 #include "debug.h"
+#include "../host/xhci-ext-caps.h"
 
 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
@@ -1884,10 +1885,56 @@  static int dwc3_get_clocks(struct dwc3 *dwc)
 	return 0;
 }
 
+static int dwc3_get_num_ports(struct dwc3 *dwc)
+{
+	void __iomem *base;
+	u8 major_revision;
+	u32 offset;
+	u32 val;
+
+	/*
+	 * Remap xHCI address space to access XHCI ext cap regs since it is
+	 * needed to get information on number of ports present.
+	 */
+	base = ioremap(dwc->xhci_resources[0].start,
+		       resource_size(&dwc->xhci_resources[0]));
+	if (!base)
+		return -ENOMEM;
+
+	offset = 0;
+	do {
+		offset = xhci_find_next_ext_cap(base, offset,
+						XHCI_EXT_CAPS_PROTOCOL);
+		if (!offset)
+			break;
+
+		val = readl(base + offset);
+		major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+		val = readl(base + offset + 0x08);
+		if (major_revision == 0x03) {
+			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+		} else if (major_revision <= 0x02) {
+			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+		} else {
+			dev_warn(dwc->dev, "unrecognized port major revision %d\n",
+				 major_revision);
+		}
+	} while (1);
+
+	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+		dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+	iounmap(base);
+
+	return 0;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
 	struct resource		*res, dwc_res;
+	unsigned int		hw_mode;
 	void __iomem		*regs;
 	struct dwc3		*dwc;
 	int			ret;
@@ -1971,6 +2018,20 @@  static int dwc3_probe(struct platform_device *pdev)
 			goto err_disable_clks;
 	}
 
+	/*
+	 * Currently only DWC3 controllers that are host-only capable
+	 * can have more than one port.
+	 */
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+		ret = dwc3_get_num_ports(dwc);
+		if (ret)
+			goto err_disable_clks;
+	} else {
+		dwc->num_usb2_ports = 1;
+		dwc->num_usb3_ports = 1;
+	}
+
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 7e80dd3d466b..341e4c73cb2e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1039,6 +1039,8 @@  struct dwc3_scratchpad_array {
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
+ * @num_usb2_ports: number of USB2 ports
+ * @num_usb3_ports: number of USB3 ports
  * @phys_ready: flag to indicate that PHYs are ready
  * @ulpi: pointer to ulpi interface
  * @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1187,6 +1189,9 @@  struct dwc3 {
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;
 
+	u8			num_usb2_ports;
+	u8			num_usb3_ports;
+
 	bool			phys_ready;
 
 	struct ulpi		*ulpi;