@@ -457,6 +457,8 @@ static const struct usb_device_id onboard_hub_id_table[] = {
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
+ { USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 */
+ { USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 */
{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
@@ -31,6 +31,11 @@ static const struct onboard_hub_pdata realtek_rts5411_data = {
.num_supplies = 1,
};
+static const struct onboard_hub_pdata ti_tusb8020b_data = {
+ .reset_us = 3000,
+ .num_supplies = 1,
+};
+
static const struct onboard_hub_pdata ti_tusb8041_data = {
.reset_us = 3000,
.num_supplies = 1,
@@ -70,6 +75,8 @@ static const struct of_device_id onboard_hub_match[] = {
{ .compatible = "usb424,2744", .data = µchip_usb5744_data, },
{ .compatible = "usb424,5733", .data = µchip_usb5734_data, },
{ .compatible = "usb424,5744", .data = µchip_usb5744_data, },
+ { .compatible = "usb451,8025", .data = &ti_tusb8020b_data, },
+ { .compatible = "usb451,8027", .data = &ti_tusb8020b_data, },
{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
The TI TUSB8020B is a 2-port USB 3.0 hub. Add support for this hub in the driver in order to bring up reset, and supply dependencies. Power-up: Issue a GPIO reset (GRSTz) 3ms after VDD and VDD33 stabilize. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> --- drivers/usb/misc/onboard_usb_hub.c | 2 ++ drivers/usb/misc/onboard_usb_hub.h | 7 +++++++ 2 files changed, 9 insertions(+)