diff mbox series

[net-next,v5,7/9] net: intel: igb: Use linkmode helpers for EEE

Message ID 20240226-keee-u32-cleanup-v5-7-9e7323c41c38@lunn.ch
State New
Headers show
Series drivers: net: Convert EEE handling to use linkmode bitmaps | expand

Commit Message

Andrew Lunn Feb. 27, 2024, 1:29 a.m. UTC 
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 35 ++++++++++++++++++----------
 1 file changed, 23 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index b87b23d2151c..99977a22b843 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -3038,11 +3038,13 @@  static int igb_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 	    (hw->phy.media_type != e1000_media_type_copper))
 		return -EOPNOTSUPP;
 
-	edata->supported_u32 = (SUPPORTED_1000baseT_Full |
-				SUPPORTED_100baseT_Full);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 edata->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+			 edata->supported);
 	if (!hw->dev_spec._82575.eee_disable)
-		edata->advertised_u32 =
-			mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+		mii_eee_cap1_mod_linkmode_t(edata->advertised,
+					    adapter->eee_advert);
 
 	/* The IPCNFG and EEER registers are not supported on I354. */
 	if (hw->mac.type == e1000_i354) {
@@ -3068,7 +3070,7 @@  static int igb_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 		if (ret_val)
 			return -ENODATA;
 
-		edata->lp_advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+		mii_eee_cap1_mod_linkmode_t(edata->lp_advertised, phy_data);
 		break;
 	case e1000_i354:
 	case e1000_i210:
@@ -3079,7 +3081,7 @@  static int igb_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 		if (ret_val)
 			return -ENODATA;
 
-		edata->lp_advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+		mii_eee_cap1_mod_linkmode_t(edata->lp_advertised, phy_data);
 
 		break;
 	default:
@@ -3099,7 +3101,7 @@  static int igb_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 		edata->eee_enabled = false;
 		edata->eee_active = false;
 		edata->tx_lpi_enabled = false;
-		edata->advertised_u32 &= ~edata->advertised_u32;
+		linkmode_zero(edata->advertised);
 	}
 
 	return 0;
@@ -3109,6 +3111,8 @@  static int igb_set_eee(struct net_device *netdev,
 		       struct ethtool_keee *edata)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = {};
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = {};
 	struct e1000_hw *hw = &adapter->hw;
 	struct ethtool_keee eee_curr;
 	bool adv1g_eee = true, adv100m_eee = true;
@@ -3138,14 +3142,21 @@  static int igb_set_eee(struct net_device *netdev,
 			return -EINVAL;
 		}
 
-		if (!edata->advertised_u32 || (edata->advertised_u32 &
-		    ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL))) {
+		linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				 supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 supported);
+		if (linkmode_andnot(tmp, edata->advertised, supported)) {
 			dev_err(&adapter->pdev->dev,
 				"EEE Advertisement supports only 100Tx and/or 100T full duplex\n");
 			return -EINVAL;
 		}
-		adv100m_eee = !!(edata->advertised_u32 & ADVERTISE_100_FULL);
-		adv1g_eee = !!(edata->advertised_u32 & ADVERTISE_1000_FULL);
+		adv100m_eee = linkmode_test_bit(
+			ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+			edata->advertised);
+		adv1g_eee = linkmode_test_bit(
+			ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			edata->advertised);
 
 	} else if (!edata->eee_enabled) {
 		dev_err(&adapter->pdev->dev,
@@ -3153,7 +3164,7 @@  static int igb_set_eee(struct net_device *netdev,
 		return -EINVAL;
 	}
 
-	adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised_u32);
+	adapter->eee_advert = linkmode_to_mii_eee_cap1_t(edata->advertised);
 	if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) {
 		hw->dev_spec._82575.eee_disable = !edata->eee_enabled;
 		adapter->flags |= IGB_FLAG_EEE;