From patchwork Tue Jan 23 16:42:39 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Li X-Patchwork-Id: 765586 Received: from EUR04-DB3-obe.outbound.protection.outlook.com (mail-db3eur04on2078.outbound.protection.outlook.com [40.107.6.78]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 671E08613F; Tue, 23 Jan 2024 16:43:06 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.6.78 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706028189; cv=fail; b=dKi3P9bSbw2k4wh2jgycb5foXQQO5qLINrX07WWQzhJqEm7BG72KgtgiiH5hByGenpdx6WWk8RN9huCIneRh82Igsic25sZ5brWqrOQB3txQk0+rpvgnzdmTY0G+bWO9pbNF2LQJ0CzB+lHcGv4T8PUKZGlNa0BR+tt0d5jQFuo= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706028189; c=relaxed/simple; bh=QW8sn+VQ/3fwnaQ31eT8VGBdDK7MJ46DE1RzDubC/bI=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: Content-Type:MIME-Version; b=szj5qr66ElHMI8JaqzpEtpsQMhgcqfj3A6cgeUX5cWhxGbU8O0oQY8zVqaBjLyEHr9UZshJ8XoZadv42vx9+3t5O4d+bmemxnM/DEDoB3K2TvWil9MVvrLtKiJ7nQkfF5DVpY5hLJ/mw5CawGlfRbZveFRyAkgvu656lUbHiGEw= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com; spf=pass smtp.mailfrom=nxp.com; dkim=pass (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b=H9x0ZUqW; arc=fail smtp.client-ip=40.107.6.78 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=nxp.com header.i=@nxp.com header.b="H9x0ZUqW" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=XBStMt2th+BsCvC6hIO/00b7N1+YZvzlMa/6V2tD8FU2/MIuKgOQzpGtpkais21O/X/FS81Mk9MkDdLoCP9ViFhYjsQeL6TjvhPKs4LlKNssBPv2ntZPC09R9eYzOBpn28h4XIS3TCEZiVZJU5mftXcbJWJV6im8Wv3vyEOdWa65NycqSVba/q91cp5Fyx1NEERhDEnnvZO95+Gx06fVdItskiWQGRD/j3aDHB6FfDO0LfsmKMBnl0STTElHP/XAxQH4CCWwb5/Mwo1g+xH7jLWotCn8GmrzoKP+8MN7uKdo93fymfoQxvtn7U5bb2aZ6Svm8GH48Pn3Lwq4hRWJdA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=1kPmnKpcvuhnrqH1o3P/DoLtZPg2O4Dnl52Ecnuv6nI=; b=mlgUHbmKORcyNaE2lAW5FJ5FMZa6USHWqRYUOd99VeSYdvwYudy0IweJppeK9fYTXkHQk7c9apt54SBTsMWV52Fp9G5BDl6MlwbZ2+u2Li2JUpB5COCs4+N9BoDqre20IBxvAggpanEerIHzpTN6MNKs75EiXNozEiZ5Fr2PqJCOP9re2/S0JwaI1OSHN7cr9rEG7RgHfgyUvZGB3tocv4iW0PWhwo30W7ZdnBjGusy/BRxQTtfCY1y8lHtwZG0uJWHgKo7T+wk+hbmAgqgQMnYg9I7tm6c9VtxoZgPpGMkD3gPFwEIlejZ9Iz5PdKu0EXWgKzk09A3vNxL/BB47jQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=1kPmnKpcvuhnrqH1o3P/DoLtZPg2O4Dnl52Ecnuv6nI=; b=H9x0ZUqWItUC5HxzBOLu+kDy6IFKz9dwQ46xf0mNbkQ0I/GYo5paiKKPZz8W7wdE/ZrRbtLPcw0WyKYtXSX6fQmggUtQFXk+vX28r6Yb/NXSxPj1iXKLFYv7ggWaiM6a6reKctZxqEy3pszIvihi4cUgJHFdOPK2pOOAnuzY6Ls= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from PAXPR04MB9642.eurprd04.prod.outlook.com (2603:10a6:102:240::14) by DBBPR04MB7929.eurprd04.prod.outlook.com (2603:10a6:10:1ec::21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7202.37; Tue, 23 Jan 2024 16:43:02 +0000 Received: from PAXPR04MB9642.eurprd04.prod.outlook.com ([fe80::c8b4:5648:8948:e85c]) by PAXPR04MB9642.eurprd04.prod.outlook.com ([fe80::c8b4:5648:8948:e85c%3]) with mapi id 15.20.7202.035; Tue, 23 Jan 2024 16:43:02 +0000 From: Frank Li To: thinh.nguyen@synopsys.com Cc: Frank.Li@nxp.com, balbi@kernel.org, devicetree@vger.kernel.org, gregkh@linuxfoundation.org, imx@lists.linux.dev, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, mark.rutland@arm.com, mathias.nyman@intel.com, pku.leo@gmail.com, ran.wang_1@nxp.com, robh+dt@kernel.org, sergei.shtylyov@cogentembedded.com Subject: [PATCH v3 1/3] XHCI: Separate PORT and CAPs macros into dedicated file Date: Tue, 23 Jan 2024 11:42:39 -0500 Message-Id: <20240123164241.3689109-2-Frank.Li@nxp.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240123164241.3689109-1-Frank.Li@nxp.com> References: <20240123164241.3689109-1-Frank.Li@nxp.com> X-ClientProxiedBy: SJ0PR05CA0107.namprd05.prod.outlook.com (2603:10b6:a03:334::22) To PAXPR04MB9642.eurprd04.prod.outlook.com (2603:10a6:102:240::14) Precedence: bulk X-Mailing-List: linux-usb@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: PAXPR04MB9642:EE_|DBBPR04MB7929:EE_ X-MS-Office365-Filtering-Correlation-Id: 48b34c18-b857-46e8-e4f1-08dc1c325d9e X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: E3tP0dWaybuY6zKsrLhKkPW/mq2y4APYLM8BhsXBIv6HVewzjgWCFVzOibN7lrRkQAa2ByTRAQOB4vZ+sIqEphozTzBguDszC4HgAroyt6jSuQ8I9n3T1tcDTB+F9JK/aGDveVFTuvSp6RfcAKVjI9b3wl6O3K9qdY2Pov52735EceUdZyCZcyCPy/psmFnprr5GXiRGrl3YF69hRzZECRZOu0V8qZozobgA3inX8WFWJPtfIRCH/8OuY1yzFrnnBdAkO4Xd4G9TO3RfbWJ7t8uW8QnxIK1Ffi6zYSAv5RmfJewpYDbrEPxb3dKBPONA+8pFTROUN5JpDKbUFnP2qhy+pxivoULUGqrxIr23bwzAux5uSLmQ90K+Wv/0q4qzca7z+I8NRXfTbiegPAfDG5vclzWrGXllSDgbU+x4h4mPeEG9EBpEFstc1iPXvIa0f+dLbjU38prDsIVzcXh0+EALy2sEzBjTYjxCPrZl7KJ3Er9NzBzDRPsQ3W5G/o9B3Uy/fn6nYTYXt/VXi27/+D+M6DMrA5o5X79ncCpEb8NfznWRxAoKd4qNvHVu5nwqFo6bSnHtUNU/5lPKGrwY4Xvju+RlAjGZ1SKYkaej7WGvHQYfPzTfudzNQDLeEgCL X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:PAXPR04MB9642.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(376002)(136003)(346002)(396003)(39860400002)(366004)(230922051799003)(1800799012)(186009)(64100799003)(451199024)(36756003)(4326008)(8936002)(8676002)(30864003)(2906002)(5660300002)(7416002)(41300700001)(38350700005)(2616005)(6666004)(6506007)(52116002)(6512007)(83380400001)(478600001)(1076003)(26005)(66946007)(316002)(66574015)(6486002)(66556008)(66476007)(6916009)(38100700002)(86362001); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 48b34c18-b857-46e8-e4f1-08dc1c325d9e X-MS-Exchange-CrossTenant-AuthSource: PAXPR04MB9642.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Jan 2024 16:43:02.7746 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: B6P4TCaqxC9AM2bmXl/tuWlH/F4ogzYcBd+7Iy13UnskWrJetvdC6fDpwU6ZfC+UooPb4/Js0mQXOtKy1y0Caw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DBBPR04MB7929 Split the PORT and CAPs macro definitions into a separate file to facilitate sharing with other files without the need to include the entire xhci.h. Signed-off-by: Frank Li --- drivers/usb/host/xhci-caps.h | 85 ++++++++++++ drivers/usb/host/xhci-port.h | 176 +++++++++++++++++++++++ drivers/usb/host/xhci.h | 262 +---------------------------------- 3 files changed, 264 insertions(+), 259 deletions(-) create mode 100644 drivers/usb/host/xhci-caps.h create mode 100644 drivers/usb/host/xhci-port.h diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h new file mode 100644 index 0000000000000..9e94cebf4a56d --- /dev/null +++ b/drivers/usb/host/xhci-caps.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* hc_capbase bitmasks */ +/* bits 7:0 - how long is the Capabilities register */ +#define HC_LENGTH(p) XHCI_HC_LENGTH(p) +/* bits 31:16 */ +#define HC_VERSION(p) (((p) >> 16) & 0xffff) + +/* HCSPARAMS1 - hcs_params1 - bitmasks */ +/* bits 0:7, Max Device Slots */ +#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) +#define HCS_SLOTS_MASK 0xff +/* bits 8:18, Max Interrupters */ +#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) +/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ +#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) + +/* HCSPARAMS2 - hcs_params2 - bitmasks */ +/* bits 0:3, frames or uframes that SW needs to queue transactions + * ahead of the HW to meet periodic deadlines */ +#define HCS_IST(p) (((p) >> 0) & 0xf) +/* bits 4:7, max number of Event Ring segments */ +#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) +/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */ +/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ +/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */ +#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f)) + +/* HCSPARAMS3 - hcs_params3 - bitmasks */ +/* bits 0:7, Max U1 to U0 latency for the roothub ports */ +#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) +/* bits 16:31, Max U2 to U0 latency for the roothub ports */ +#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) + +/* HCCPARAMS - hcc_params - bitmasks */ +/* true: HC can use 64-bit address pointers */ +#define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) +/* true: HC can do bandwidth negotiation */ +#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) +/* true: HC uses 64-byte Device Context structures + * FIXME 64-byte context structures aren't supported yet. + */ +#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) +/* true: HC has port power switches */ +#define HCC_PPC(p) ((p) & (1 << 3)) +/* true: HC has port indicators */ +#define HCS_INDICATOR(p) ((p) & (1 << 4)) +/* true: HC has Light HC Reset Capability */ +#define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) +/* true: HC supports latency tolerance messaging */ +#define HCC_LTC(p) ((p) & (1 << 6)) +/* true: no secondary Stream ID Support */ +#define HCC_NSS(p) ((p) & (1 << 7)) +/* true: HC supports Stopped - Short Packet */ +#define HCC_SPC(p) ((p) & (1 << 9)) +/* true: HC has Contiguous Frame ID Capability */ +#define HCC_CFC(p) ((p) & (1 << 11)) +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ +#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) +/* Extended Capabilities pointer from PCI base - section 5.3.6 */ +#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) + +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) + +/* db_off bitmask - bits 0:1 reserved */ +#define DBOFF_MASK (~0x3) + +/* run_regs_off bitmask - bits 0:4 reserved */ +#define RTSOFF_MASK (~0x1f) + +/* HCCPARAMS2 - hcc_params2 - bitmasks */ +/* true: HC supports U3 entry Capability */ +#define HCC2_U3C(p) ((p) & (1 << 0)) +/* true: HC supports Configure endpoint command Max exit latency too large */ +#define HCC2_CMC(p) ((p) & (1 << 1)) +/* true: HC supports Force Save context Capability */ +#define HCC2_FSC(p) ((p) & (1 << 2)) +/* true: HC supports Compliance Transition Capability */ +#define HCC2_CTC(p) ((p) & (1 << 3)) +/* true: HC support Large ESIT payload Capability > 48k */ +#define HCC2_LEC(p) ((p) & (1 << 4)) +/* true: HC support Configuration Information Capability */ +#define HCC2_CIC(p) ((p) & (1 << 5)) +/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */ +#define HCC2_ETC(p) ((p) & (1 << 6)) diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h new file mode 100644 index 0000000000000..f19efb966d180 --- /dev/null +++ b/drivers/usb/host/xhci-port.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* PORTSC - Port Status and Control Register - port_status_base bitmasks */ +/* true: device connected */ +#define PORT_CONNECT (1 << 0) +/* true: port enabled */ +#define PORT_PE (1 << 1) +/* bit 2 reserved and zeroed */ +/* true: port has an over-current condition */ +#define PORT_OC (1 << 3) +/* true: port reset signaling asserted */ +#define PORT_RESET (1 << 4) +/* Port Link State - bits 5:8 + * A read gives the current link PM state of the port, + * a write with Link State Write Strobe set sets the link state. + */ +#define PORT_PLS_MASK (0xf << 5) +#define XDEV_U0 (0x0 << 5) +#define XDEV_U1 (0x1 << 5) +#define XDEV_U2 (0x2 << 5) +#define XDEV_U3 (0x3 << 5) +#define XDEV_DISABLED (0x4 << 5) +#define XDEV_RXDETECT (0x5 << 5) +#define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_RECOVERY (0x8 << 5) +#define XDEV_HOT_RESET (0x9 << 5) +#define XDEV_COMP_MODE (0xa << 5) +#define XDEV_TEST_MODE (0xb << 5) +#define XDEV_RESUME (0xf << 5) + +/* true: port has power (see HCC_PPC) */ +#define PORT_POWER (1 << 9) +/* bits 10:13 indicate device speed: + * 0 - undefined speed - port hasn't be initialized by a reset yet + * 1 - full speed + * 2 - low speed + * 3 - high speed + * 4 - super speed + * 5-15 reserved + */ +#define DEV_SPEED_MASK (0xf << 10) +#define XDEV_FS (0x1 << 10) +#define XDEV_LS (0x2 << 10) +#define XDEV_HS (0x3 << 10) +#define XDEV_SS (0x4 << 10) +#define XDEV_SSP (0x5 << 10) +#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) +#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) +#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) +#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) +#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) +#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) +#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) +#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) + +/* Bits 20:23 in the Slot Context are the speed for the device */ +#define SLOT_SPEED_FS (XDEV_FS << 10) +#define SLOT_SPEED_LS (XDEV_LS << 10) +#define SLOT_SPEED_HS (XDEV_HS << 10) +#define SLOT_SPEED_SS (XDEV_SS << 10) +#define SLOT_SPEED_SSP (XDEV_SSP << 10) +/* Port Indicator Control */ +#define PORT_LED_OFF (0 << 14) +#define PORT_LED_AMBER (1 << 14) +#define PORT_LED_GREEN (2 << 14) +#define PORT_LED_MASK (3 << 14) +/* Port Link State Write Strobe - set this when changing link state */ +#define PORT_LINK_STROBE (1 << 16) +/* true: connect status change */ +#define PORT_CSC (1 << 17) +/* true: port enable change */ +#define PORT_PEC (1 << 18) +/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port + * into an enabled state, and the device into the default state. A "warm" reset + * also resets the link, forcing the device through the link training sequence. + * SW can also look at the Port Reset register to see when warm reset is done. + */ +#define PORT_WRC (1 << 19) +/* true: over-current change */ +#define PORT_OCC (1 << 20) +/* true: reset change - 1 to 0 transition of PORT_RESET */ +#define PORT_RC (1 << 21) +/* port link status change - set on some port link state transitions: + * Transition Reason + * ------------------------------------------------------------------------------ + * - U3 to Resume Wakeup signaling from a device + * - Resume to Recovery to U0 USB 3.0 device resume + * - Resume to U0 USB 2.0 device resume + * - U3 to Recovery to U0 Software resume of USB 3.0 device complete + * - U3 to U0 Software resume of USB 2.0 device complete + * - U2 to U0 L1 resume of USB 2.1 device complete + * - U0 to U0 (???) L1 entry rejection by USB 2.1 device + * - U0 to disabled L1 entry error with USB 2.1 device + * - Any state to inactive Error on USB 3.0 port + */ +#define PORT_PLC (1 << 22) +/* port configure error change - port failed to configure its link partner */ +#define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + +/* Cold Attach Status - xHC can set this bit to report device attached during + * Sx state. Warm port reset should be perfomed to clear this bit and move port + * to connected state. + */ +#define PORT_CAS (1 << 24) +/* wake on connect (enable) */ +#define PORT_WKCONN_E (1 << 25) +/* wake on disconnect (enable) */ +#define PORT_WKDISC_E (1 << 26) +/* wake on over-current (enable) */ +#define PORT_WKOC_E (1 << 27) +/* bits 28:29 reserved */ +/* true: device is non-removable - for USB 3.0 roothub emulation */ +#define PORT_DEV_REMOVE (1 << 30) +/* Initiate a warm port reset - complete when PORT_WRC is '1' */ +#define PORT_WR (1 << 31) + +/* We mark duplicate entries with -1 */ +#define DUPLICATE_ENTRY ((u8)(-1)) + +/* Port Power Management Status and Control - port_power_base bitmasks */ +/* Inactivity timer value for transitions into U1, in microseconds. + * Timeout can be up to 127us. 0xFF means an infinite timeout. + */ +#define PORT_U1_TIMEOUT(p) ((p) & 0xff) +#define PORT_U1_TIMEOUT_MASK 0xff +/* Inactivity timer value for transitions into U2 */ +#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) +#define PORT_U2_TIMEOUT_MASK (0xff << 8) +/* Bits 24:31 for port testing */ + +/* USB2 Protocol PORTSPMSC */ +#define PORT_L1S_MASK 7 +#define PORT_L1S_SUCCESS 1 +#define PORT_RWE (1 << 3) +#define PORT_HIRD(p) (((p) & 0xf) << 4) +#define PORT_HIRD_MASK (0xf << 4) +#define PORT_L1DS_MASK (0xff << 8) +#define PORT_L1DS(p) (((p) & 0xff) << 8) +#define PORT_HLE (1 << 16) +#define PORT_TEST_MODE_SHIFT 28 + +/* USB3 Protocol PORTLI Port Link Information */ +#define PORT_RX_LANES(p) (((p) >> 16) & 0xf) +#define PORT_TX_LANES(p) (((p) >> 20) & 0xf) + +/* USB2 Protocol PORTHLPMC */ +#define PORT_HIRDM(p)((p) & 3) +#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2) +#define PORT_BESLD(p)(((p) & 0xf) << 10) + +/* use 512 microseconds as USB2 LPM L1 default timeout. */ +#define XHCI_L1_TIMEOUT 512 + +/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency. + * Safe to use with mixed HIRD and BESL systems (host and device) and is used + * by other operating systems. + * + * XHCI 1.0 errata 8/14/12 Table 13 notes: + * "Software should choose xHC BESL/BESLD field values that do not violate a + * device's resume latency requirements, + * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached, + * or not program values < '4' if BLC = '0' and a BESL device is attached. + */ +#define XHCI_DEFAULT_BESL 4 + +/* + * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports + * to complete link training. usually link trainig completes much faster + * so check status 10 times with 36ms sleep in places we need to wait for + * polling to complete. + */ +#define XHCI_PORT_POLLING_LFPS_TIME 36 diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a5c72a634e6a9..c6349e7e1e957 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -22,6 +22,9 @@ #include "xhci-ext-caps.h" #include "pci-quirks.h" +#include "xhci-port.h" +#include "xhci-caps.h" + /* max buffer size for trace and debug messages */ #define XHCI_MSG_MAX 500 @@ -62,90 +65,6 @@ struct xhci_cap_regs { /* Reserved up to (CAPLENGTH - 0x1C) */ }; -/* hc_capbase bitmasks */ -/* bits 7:0 - how long is the Capabilities register */ -#define HC_LENGTH(p) XHCI_HC_LENGTH(p) -/* bits 31:16 */ -#define HC_VERSION(p) (((p) >> 16) & 0xffff) - -/* HCSPARAMS1 - hcs_params1 - bitmasks */ -/* bits 0:7, Max Device Slots */ -#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) -#define HCS_SLOTS_MASK 0xff -/* bits 8:18, Max Interrupters */ -#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) -/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ -#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) - -/* HCSPARAMS2 - hcs_params2 - bitmasks */ -/* bits 0:3, frames or uframes that SW needs to queue transactions - * ahead of the HW to meet periodic deadlines */ -#define HCS_IST(p) (((p) >> 0) & 0xf) -/* bits 4:7, max number of Event Ring segments */ -#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) -/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */ -/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ -/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */ -#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f)) - -/* HCSPARAMS3 - hcs_params3 - bitmasks */ -/* bits 0:7, Max U1 to U0 latency for the roothub ports */ -#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) -/* bits 16:31, Max U2 to U0 latency for the roothub ports */ -#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) - -/* HCCPARAMS - hcc_params - bitmasks */ -/* true: HC can use 64-bit address pointers */ -#define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) -/* true: HC can do bandwidth negotiation */ -#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) -/* true: HC uses 64-byte Device Context structures - * FIXME 64-byte context structures aren't supported yet. - */ -#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) -/* true: HC has port power switches */ -#define HCC_PPC(p) ((p) & (1 << 3)) -/* true: HC has port indicators */ -#define HCS_INDICATOR(p) ((p) & (1 << 4)) -/* true: HC has Light HC Reset Capability */ -#define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) -/* true: HC supports latency tolerance messaging */ -#define HCC_LTC(p) ((p) & (1 << 6)) -/* true: no secondary Stream ID Support */ -#define HCC_NSS(p) ((p) & (1 << 7)) -/* true: HC supports Stopped - Short Packet */ -#define HCC_SPC(p) ((p) & (1 << 9)) -/* true: HC has Contiguous Frame ID Capability */ -#define HCC_CFC(p) ((p) & (1 << 11)) -/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ -#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) -/* Extended Capabilities pointer from PCI base - section 5.3.6 */ -#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) - -#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) - -/* db_off bitmask - bits 0:1 reserved */ -#define DBOFF_MASK (~0x3) - -/* run_regs_off bitmask - bits 0:4 reserved */ -#define RTSOFF_MASK (~0x1f) - -/* HCCPARAMS2 - hcc_params2 - bitmasks */ -/* true: HC supports U3 entry Capability */ -#define HCC2_U3C(p) ((p) & (1 << 0)) -/* true: HC supports Configure endpoint command Max exit latency too large */ -#define HCC2_CMC(p) ((p) & (1 << 1)) -/* true: HC supports Force Save context Capability */ -#define HCC2_FSC(p) ((p) & (1 << 2)) -/* true: HC supports Compliance Transition Capability */ -#define HCC2_CTC(p) ((p) & (1 << 3)) -/* true: HC support Large ESIT payload Capability > 48k */ -#define HCC2_LEC(p) ((p) & (1 << 4)) -/* true: HC support Configuration Information Capability */ -#define HCC2_CIC(p) ((p) & (1 << 5)) -/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */ -#define HCC2_ETC(p) ((p) & (1 << 6)) - /* Number of registers per port */ #define NUM_PORT_REGS 4 @@ -291,181 +210,6 @@ struct xhci_op_regs { #define CONFIG_CIE (1 << 9) /* bits 10:31 - reserved and should be preserved */ -/* PORTSC - Port Status and Control Register - port_status_base bitmasks */ -/* true: device connected */ -#define PORT_CONNECT (1 << 0) -/* true: port enabled */ -#define PORT_PE (1 << 1) -/* bit 2 reserved and zeroed */ -/* true: port has an over-current condition */ -#define PORT_OC (1 << 3) -/* true: port reset signaling asserted */ -#define PORT_RESET (1 << 4) -/* Port Link State - bits 5:8 - * A read gives the current link PM state of the port, - * a write with Link State Write Strobe set sets the link state. - */ -#define PORT_PLS_MASK (0xf << 5) -#define XDEV_U0 (0x0 << 5) -#define XDEV_U1 (0x1 << 5) -#define XDEV_U2 (0x2 << 5) -#define XDEV_U3 (0x3 << 5) -#define XDEV_DISABLED (0x4 << 5) -#define XDEV_RXDETECT (0x5 << 5) -#define XDEV_INACTIVE (0x6 << 5) -#define XDEV_POLLING (0x7 << 5) -#define XDEV_RECOVERY (0x8 << 5) -#define XDEV_HOT_RESET (0x9 << 5) -#define XDEV_COMP_MODE (0xa << 5) -#define XDEV_TEST_MODE (0xb << 5) -#define XDEV_RESUME (0xf << 5) - -/* true: port has power (see HCC_PPC) */ -#define PORT_POWER (1 << 9) -/* bits 10:13 indicate device speed: - * 0 - undefined speed - port hasn't be initialized by a reset yet - * 1 - full speed - * 2 - low speed - * 3 - high speed - * 4 - super speed - * 5-15 reserved - */ -#define DEV_SPEED_MASK (0xf << 10) -#define XDEV_FS (0x1 << 10) -#define XDEV_LS (0x2 << 10) -#define XDEV_HS (0x3 << 10) -#define XDEV_SS (0x4 << 10) -#define XDEV_SSP (0x5 << 10) -#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) -#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) -#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) -#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) -#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) -#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) -#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) -#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) - -/* Bits 20:23 in the Slot Context are the speed for the device */ -#define SLOT_SPEED_FS (XDEV_FS << 10) -#define SLOT_SPEED_LS (XDEV_LS << 10) -#define SLOT_SPEED_HS (XDEV_HS << 10) -#define SLOT_SPEED_SS (XDEV_SS << 10) -#define SLOT_SPEED_SSP (XDEV_SSP << 10) -/* Port Indicator Control */ -#define PORT_LED_OFF (0 << 14) -#define PORT_LED_AMBER (1 << 14) -#define PORT_LED_GREEN (2 << 14) -#define PORT_LED_MASK (3 << 14) -/* Port Link State Write Strobe - set this when changing link state */ -#define PORT_LINK_STROBE (1 << 16) -/* true: connect status change */ -#define PORT_CSC (1 << 17) -/* true: port enable change */ -#define PORT_PEC (1 << 18) -/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port - * into an enabled state, and the device into the default state. A "warm" reset - * also resets the link, forcing the device through the link training sequence. - * SW can also look at the Port Reset register to see when warm reset is done. - */ -#define PORT_WRC (1 << 19) -/* true: over-current change */ -#define PORT_OCC (1 << 20) -/* true: reset change - 1 to 0 transition of PORT_RESET */ -#define PORT_RC (1 << 21) -/* port link status change - set on some port link state transitions: - * Transition Reason - * ------------------------------------------------------------------------------ - * - U3 to Resume Wakeup signaling from a device - * - Resume to Recovery to U0 USB 3.0 device resume - * - Resume to U0 USB 2.0 device resume - * - U3 to Recovery to U0 Software resume of USB 3.0 device complete - * - U3 to U0 Software resume of USB 2.0 device complete - * - U2 to U0 L1 resume of USB 2.1 device complete - * - U0 to U0 (???) L1 entry rejection by USB 2.1 device - * - U0 to disabled L1 entry error with USB 2.1 device - * - Any state to inactive Error on USB 3.0 port - */ -#define PORT_PLC (1 << 22) -/* port configure error change - port failed to configure its link partner */ -#define PORT_CEC (1 << 23) -#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ - PORT_RC | PORT_PLC | PORT_CEC) - - -/* Cold Attach Status - xHC can set this bit to report device attached during - * Sx state. Warm port reset should be perfomed to clear this bit and move port - * to connected state. - */ -#define PORT_CAS (1 << 24) -/* wake on connect (enable) */ -#define PORT_WKCONN_E (1 << 25) -/* wake on disconnect (enable) */ -#define PORT_WKDISC_E (1 << 26) -/* wake on over-current (enable) */ -#define PORT_WKOC_E (1 << 27) -/* bits 28:29 reserved */ -/* true: device is non-removable - for USB 3.0 roothub emulation */ -#define PORT_DEV_REMOVE (1 << 30) -/* Initiate a warm port reset - complete when PORT_WRC is '1' */ -#define PORT_WR (1 << 31) - -/* We mark duplicate entries with -1 */ -#define DUPLICATE_ENTRY ((u8)(-1)) - -/* Port Power Management Status and Control - port_power_base bitmasks */ -/* Inactivity timer value for transitions into U1, in microseconds. - * Timeout can be up to 127us. 0xFF means an infinite timeout. - */ -#define PORT_U1_TIMEOUT(p) ((p) & 0xff) -#define PORT_U1_TIMEOUT_MASK 0xff -/* Inactivity timer value for transitions into U2 */ -#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) -#define PORT_U2_TIMEOUT_MASK (0xff << 8) -/* Bits 24:31 for port testing */ - -/* USB2 Protocol PORTSPMSC */ -#define PORT_L1S_MASK 7 -#define PORT_L1S_SUCCESS 1 -#define PORT_RWE (1 << 3) -#define PORT_HIRD(p) (((p) & 0xf) << 4) -#define PORT_HIRD_MASK (0xf << 4) -#define PORT_L1DS_MASK (0xff << 8) -#define PORT_L1DS(p) (((p) & 0xff) << 8) -#define PORT_HLE (1 << 16) -#define PORT_TEST_MODE_SHIFT 28 - -/* USB3 Protocol PORTLI Port Link Information */ -#define PORT_RX_LANES(p) (((p) >> 16) & 0xf) -#define PORT_TX_LANES(p) (((p) >> 20) & 0xf) - -/* USB2 Protocol PORTHLPMC */ -#define PORT_HIRDM(p)((p) & 3) -#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2) -#define PORT_BESLD(p)(((p) & 0xf) << 10) - -/* use 512 microseconds as USB2 LPM L1 default timeout. */ -#define XHCI_L1_TIMEOUT 512 - -/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency. - * Safe to use with mixed HIRD and BESL systems (host and device) and is used - * by other operating systems. - * - * XHCI 1.0 errata 8/14/12 Table 13 notes: - * "Software should choose xHC BESL/BESLD field values that do not violate a - * device's resume latency requirements, - * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached, - * or not program values < '4' if BLC = '0' and a BESL device is attached. - */ -#define XHCI_DEFAULT_BESL 4 - -/* - * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports - * to complete link training. usually link trainig completes much faster - * so check status 10 times with 36ms sleep in places we need to wait for - * polling to complete. - */ -#define XHCI_PORT_POLLING_LFPS_TIME 36 - /** * struct xhci_intr_reg - Interrupt Register Set * @irq_pending: IMAN - Interrupt Management Register. Used to enable