diff mbox series

[18/19] usb: host: xhci-plat: fix possible kernel oops while resuming

Message ID 20231019102924.2797346-19-mathias.nyman@linux.intel.com
State New
Headers show
Series xhci features for usb-next | expand

Commit Message

Mathias Nyman Oct. 19, 2023, 10:29 a.m. UTC 
From: Sergey Shtylyov <s.shtylyov@omp.ru>

If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops.  Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

Fixes: 8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-plat.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 28218c8f1837..b93161374293 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -458,23 +458,38 @@  static int __maybe_unused xhci_plat_resume(struct device *dev)
 	int ret;
 
 	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
-		clk_prepare_enable(xhci->clk);
-		clk_prepare_enable(xhci->reg_clk);
+		ret = clk_prepare_enable(xhci->clk);
+		if (ret)
+			return ret;
+
+		ret = clk_prepare_enable(xhci->reg_clk);
+		if (ret) {
+			clk_disable_unprepare(xhci->clk);
+			return ret;
+		}
 	}
 
 	ret = xhci_priv_resume_quirk(hcd);
 	if (ret)
-		return ret;
+		goto disable_clks;
 
 	ret = xhci_resume(xhci, PMSG_RESUME);
 	if (ret)
-		return ret;
+		goto disable_clks;
 
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
 	return 0;
+
+disable_clks:
+	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
+		clk_disable_unprepare(xhci->clk);
+		clk_disable_unprepare(xhci->reg_clk);
+	}
+
+	return ret;
 }
 
 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)