| Message ID | 20230914100302.30274-4-quic_linyyuan@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | usb: gadget: reduce usb gadget trace event buffer usage | expand |
On 9/15/2023 12:54 AM, Steven Rostedt wrote: > On Thu, 14 Sep 2023 18:02:57 +0800 > Linyu Yuan <quic_linyyuan@quicinc.com> wrote: > >> Save u32 members into trace event ring buffer and parse it for possible >> bit fields. >> >> Use new DECLARE_EVENT_CLASS_PRINT_INIT() class macro for output stage. >> >> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> >> --- >> drivers/usb/gadget/udc/trace.h | 154 +++++++++++++++------------------ >> 1 file changed, 69 insertions(+), 85 deletions(-) >> >> diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h >> index a5ed26fbc2da..e1754667f1d2 100644 >> --- a/drivers/usb/gadget/udc/trace.h >> +++ b/drivers/usb/gadget/udc/trace.h >> @@ -17,7 +17,7 @@ >> #include <asm/byteorder.h> >> #include <linux/usb/gadget.h> >> >> -DECLARE_EVENT_CLASS(udc_log_gadget, >> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_gadget, >> TP_PROTO(struct usb_gadget *g, int ret), >> TP_ARGS(g, ret), >> TP_STRUCT__entry( >> @@ -25,20 +25,7 @@ DECLARE_EVENT_CLASS(udc_log_gadget, >> __field(enum usb_device_speed, max_speed) >> __field(enum usb_device_state, state) >> __field(unsigned, mA) >> - __field(unsigned, sg_supported) >> - __field(unsigned, is_otg) >> - __field(unsigned, is_a_peripheral) >> - __field(unsigned, b_hnp_enable) >> - __field(unsigned, a_hnp_support) >> - __field(unsigned, hnp_polling_support) >> - __field(unsigned, host_request_flag) >> - __field(unsigned, quirk_ep_out_aligned_size) >> - __field(unsigned, quirk_altset_not_supp) >> - __field(unsigned, quirk_stall_not_supp) >> - __field(unsigned, quirk_zlp_not_supp) >> - __field(unsigned, is_selfpowered) >> - __field(unsigned, deactivated) >> - __field(unsigned, connected) >> + __field(u32, gdw1) >> __field(int, ret) >> ), >> TP_fast_assign( >> @@ -46,39 +33,35 @@ DECLARE_EVENT_CLASS(udc_log_gadget, >> __entry->max_speed = g->max_speed; >> __entry->state = g->state; >> __entry->mA = g->mA; >> - __entry->sg_supported = g->sg_supported; >> - __entry->is_otg = g->is_otg; >> - __entry->is_a_peripheral = g->is_a_peripheral; >> - __entry->b_hnp_enable = g->b_hnp_enable; >> - __entry->a_hnp_support = g->a_hnp_support; >> - __entry->hnp_polling_support = g->hnp_polling_support; >> - __entry->host_request_flag = g->host_request_flag; >> - __entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size; >> - __entry->quirk_altset_not_supp = g->quirk_altset_not_supp; >> - __entry->quirk_stall_not_supp = g->quirk_stall_not_supp; >> - __entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp; >> - __entry->is_selfpowered = g->is_selfpowered; >> - __entry->deactivated = g->deactivated; >> - __entry->connected = g->connected; >> + __entry->gdw1 = g->dw1; >> __entry->ret = ret; >> ), >> - TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d", >> + TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d", >> __entry->speed, __entry->max_speed, __entry->state, __entry->mA, >> - __entry->sg_supported ? "sg:" : "", >> - __entry->is_otg ? "OTG:" : "", >> - __entry->is_a_peripheral ? "a_peripheral:" : "", >> - __entry->b_hnp_enable ? "b_hnp:" : "", >> - __entry->a_hnp_support ? "a_hnp:" : "", >> - __entry->hnp_polling_support ? "hnp_poll:" : "", >> - __entry->host_request_flag ? "hostreq:" : "", >> - __entry->quirk_ep_out_aligned_size ? "out_aligned:" : "", >> - __entry->quirk_altset_not_supp ? "no_altset:" : "", >> - __entry->quirk_stall_not_supp ? "no_stall:" : "", >> - __entry->quirk_zlp_not_supp ? "no_zlp" : "", >> - __entry->is_selfpowered ? "self-powered:" : "bus-powered:", >> - __entry->deactivated ? "deactivated:" : "activated:", >> - __entry->connected ? "connected" : "disconnected", >> - __entry->ret) >> + tg.sg_supported ? "sg:" : "", >> + tg.is_otg ? "OTG:" : "", >> + tg.is_a_peripheral ? "a_peripheral:" : "", >> + tg.b_hnp_enable ? "b_hnp:" : "", >> + tg.a_hnp_support ? "a_hnp:" : "", >> + tg.a_alt_hnp_support ? "a_alt_hnp:" : "", >> + tg.hnp_polling_support ? "hnp_poll:" : "", >> + tg.host_request_flag ? "hostreq:" : "", >> + tg.quirk_ep_out_aligned_size ? "out_aligned:" : "", >> + tg.quirk_altset_not_supp ? "no_altset:" : "", >> + tg.quirk_stall_not_supp ? "no_stall:" : "", >> + tg.quirk_zlp_not_supp ? "no_zlp" : "", >> + tg.quirk_avoids_skb_reserve ? "no_skb_reserve" : "", >> + tg.is_selfpowered ? "self-powered:" : "bus-powered:", >> + tg.deactivated ? "deactivated:" : "activated:", >> + tg.connected ? "connected" : "disconnected", >> + tg.lpm_capable ? "lpm-capable" : "", >> + tg.wakeup_capable ? "wakeup-capable" : "", >> + tg.wakeup_armed ? "wakeup-armed" : "", > You can accomplish the above using __print_flags(), if you make it into a > bitmask, and that make a macro for each bit. thanks for suggestion, good idea. > >> + __entry->ret), >> + TP_printk_init( >> + struct usb_gadget tg; >> + tg.dw1 = __entry->gdw1; >> + ) >> ); >> >> DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number, >> @@ -141,38 +124,36 @@ DEFINE_EVENT(udc_log_gadget, usb_gadget_activate, >> TP_ARGS(g, ret) >> ); >> >> -DECLARE_EVENT_CLASS(udc_log_ep, >> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_ep, >> TP_PROTO(struct usb_ep *ep, int ret), >> TP_ARGS(ep, ret), >> TP_STRUCT__entry( >> - __string(name, ep->name) >> - __field(unsigned, maxpacket) >> - __field(unsigned, maxpacket_limit) >> - __field(unsigned, max_streams) >> - __field(unsigned, mult) >> - __field(unsigned, maxburst) >> - __field(u8, address) >> - __field(bool, claimed) >> - __field(bool, enabled) >> + __field(u32, edw3) >> + __field(u32, edw1) >> + __field(u32, edw2) >> __field(int, ret) >> ), >> TP_fast_assign( >> - __assign_str(name, ep->name); >> - __entry->maxpacket = ep->maxpacket; >> - __entry->maxpacket_limit = ep->maxpacket_limit; >> - __entry->max_streams = ep->max_streams; >> - __entry->mult = ep->mult; >> - __entry->maxburst = ep->maxburst; >> - __entry->address = ep->address, >> - __entry->claimed = ep->claimed; >> - __entry->enabled = ep->enabled; >> + __entry->edw3 = ep->dw3; >> + __entry->edw1 = ep->dw1; >> + __entry->edw2 = ep->dw2; >> __entry->ret = ret; >> ), >> TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d", >> - __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, >> - __entry->max_streams, __entry->mult, __entry->maxburst, >> - __entry->address, __entry->claimed ? "claimed:" : "released:", >> - __entry->enabled ? "enabled" : "disabled", ret) >> + __s, te.maxpacket, te.maxpacket_limit, >> + te.max_streams, te.mult, te.maxburst, >> + te.address, te.claimed ? "claimed:" : "released:", >> + te.enabled ? "enabled" : "disabled", ret), >> + TP_printk_init( >> + struct usb_ep te; >> + char __s[9]; >> + te.dw1 = __entry->edw1; >> + te.dw2 = __entry->edw2; >> + te.dw3 = __entry->edw3; >> + snprintf(__s, 9, "ep%d%s", te.address, \ >> + (te.caps.dir_in && te.caps.dir_out) ? "" : \ >> + te.caps.dir_in ? "in" : "out"); > Note, there's a temp buffer trace_seq 'p' available for use as well. See > both include/trace/events/libata.h and include/trace/events/scsi.h: > > const char *libata_trace_parse_status(struct trace_seq*, unsigned char); > #define __parse_status(s) libata_trace_parse_status(p, s) > > I think that can be used instead of adding this TP_printk_init(). the reason add TP_printk_init() because when i first design some macro which not related to tracepoint, it use too much stack. but i think TP_printk_init() is good as it following most common way to print. > > -- Steve > > >> + ) >> ); >> >> DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit, >> @@ -215,44 +196,47 @@ DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush, >> TP_ARGS(ep, ret) >> ); >> >> -DECLARE_EVENT_CLASS(udc_log_req, >> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_req, >> TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), >> TP_ARGS(ep, req, ret), >> TP_STRUCT__entry( >> - __string(name, ep->name) >> + __field(u32, edw3) >> __field(unsigned, length) >> __field(unsigned, actual) >> __field(unsigned, num_sgs) >> __field(unsigned, num_mapped_sgs) >> - __field(unsigned, stream_id) >> - __field(unsigned, no_interrupt) >> - __field(unsigned, zero) >> - __field(unsigned, short_not_ok) >> + __field(u32, rdw1) >> __field(int, status) >> __field(int, ret) >> __field(struct usb_request *, req) >> ), >> TP_fast_assign( >> - __assign_str(name, ep->name); >> + __entry->edw3 = ep->dw3; >> __entry->length = req->length; >> __entry->actual = req->actual; >> __entry->num_sgs = req->num_sgs; >> __entry->num_mapped_sgs = req->num_mapped_sgs; >> - __entry->stream_id = req->stream_id; >> - __entry->no_interrupt = req->no_interrupt; >> - __entry->zero = req->zero; >> - __entry->short_not_ok = req->short_not_ok; >> + __entry->rdw1 = req->dw1; >> __entry->status = req->status; >> __entry->ret = ret; >> __entry->req = req; >> ), >> TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d", >> - __get_str(name),__entry->req, __entry->actual, __entry->length, >> - __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id, >> - __entry->zero ? "Z" : "z", >> - __entry->short_not_ok ? "S" : "s", >> - __entry->no_interrupt ? "i" : "I", >> - __entry->status, __entry->ret >> + __s,__entry->req, __entry->actual, __entry->length, >> + __entry->num_mapped_sgs, __entry->num_sgs, tr.stream_id, >> + tr.zero ? "Z" : "z", >> + tr.short_not_ok ? "S" : "s", >> + tr.no_interrupt ? "i" : "I", >> + __entry->status, __entry->ret), >> + TP_printk_init( >> + struct usb_ep te; >> + struct usb_request tr; >> + char __s[9]; >> + te.dw3 = __entry->edw3; >> + tr.dw1 = __entry->rdw1; >> + snprintf(__s, 9, "ep%d%s", te.address, \ >> + (te.caps.dir_in && te.caps.dir_out) ? "" : \ >> + te.caps.dir_in ? "in" : "out"); >> ) >> ); >>
On Fri, 15 Sep 2023 09:11:06 +0800 Linyu Yuan <quic_linyyuan@quicinc.com> wrote: > >> + snprintf(__s, 9, "ep%d%s", te.address, \ > >> + (te.caps.dir_in && te.caps.dir_out) ? "" : \ > >> + te.caps.dir_in ? "in" : "out"); > > Note, there's a temp buffer trace_seq 'p' available for use as well. See > > both include/trace/events/libata.h and include/trace/events/scsi.h: > > > > const char *libata_trace_parse_status(struct trace_seq*, unsigned char); > > #define __parse_status(s) libata_trace_parse_status(p, s) > > > > I think that can be used instead of adding this TP_printk_init(). > > > the reason add TP_printk_init() because when i first design some macro > which not > > related to tracepoint, it use too much stack. > Not sure what you mean about 'uses too much stack'. This is called by the reading code and not some arbitrary location, and the above macros are done in the same location as your "init" call, so I'm not sure how that makes a difference on the stack. > > but i think TP_printk_init() is good as it following most common way > to print. > I really do not want to add more versions of TRACE_EVENT() that I need to maintain unless there is a really good reason to do so. And I really don't want to encourage the use of a "TP_printk_init()" because that just encourages more use cases that will make it hard for user space to parse the TP_printk(). -- Steve
On 9/15/2023 10:16 AM, Steven Rostedt wrote: > On Fri, 15 Sep 2023 09:11:06 +0800 > Linyu Yuan <quic_linyyuan@quicinc.com> wrote: > >>>> + snprintf(__s, 9, "ep%d%s", te.address, \ >>>> + (te.caps.dir_in && te.caps.dir_out) ? "" : \ >>>> + te.caps.dir_in ? "in" : "out"); >>> Note, there's a temp buffer trace_seq 'p' available for use as well. See >>> both include/trace/events/libata.h and include/trace/events/scsi.h: >>> >>> const char *libata_trace_parse_status(struct trace_seq*, unsigned char); >>> #define __parse_status(s) libata_trace_parse_status(p, s) >>> >>> I think that can be used instead of adding this TP_printk_init(). >> >> the reason add TP_printk_init() because when i first design some macro >> which not >> >> related to tracepoint, it use too much stack. >> > Not sure what you mean about 'uses too much stack'. This is called by > the reading code and not some arbitrary location, and the above macros > are done in the same location as your "init" call, so I'm not sure how > that makes a difference on the stack. > >> but i think TP_printk_init() is good as it following most common way >> to print. >> > I really do not want to add more versions of TRACE_EVENT() that I need > to maintain unless there is a really good reason to do so. > > And I really don't want to encourage the use of a "TP_printk_init()" > because that just encourages more use cases that will make it hard for > user space to parse the TP_printk(). that's true, it is difficult to understand, when i add this new, it report build issue. will consider other way for this case without new tracepoint macro. > > -- Steve
diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h index a5ed26fbc2da..e1754667f1d2 100644 --- a/drivers/usb/gadget/udc/trace.h +++ b/drivers/usb/gadget/udc/trace.h @@ -17,7 +17,7 @@ #include <asm/byteorder.h> #include <linux/usb/gadget.h> -DECLARE_EVENT_CLASS(udc_log_gadget, +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_gadget, TP_PROTO(struct usb_gadget *g, int ret), TP_ARGS(g, ret), TP_STRUCT__entry( @@ -25,20 +25,7 @@ DECLARE_EVENT_CLASS(udc_log_gadget, __field(enum usb_device_speed, max_speed) __field(enum usb_device_state, state) __field(unsigned, mA) - __field(unsigned, sg_supported) - __field(unsigned, is_otg) - __field(unsigned, is_a_peripheral) - __field(unsigned, b_hnp_enable) - __field(unsigned, a_hnp_support) - __field(unsigned, hnp_polling_support) - __field(unsigned, host_request_flag) - __field(unsigned, quirk_ep_out_aligned_size) - __field(unsigned, quirk_altset_not_supp) - __field(unsigned, quirk_stall_not_supp) - __field(unsigned, quirk_zlp_not_supp) - __field(unsigned, is_selfpowered) - __field(unsigned, deactivated) - __field(unsigned, connected) + __field(u32, gdw1) __field(int, ret) ), TP_fast_assign( @@ -46,39 +33,35 @@ DECLARE_EVENT_CLASS(udc_log_gadget, __entry->max_speed = g->max_speed; __entry->state = g->state; __entry->mA = g->mA; - __entry->sg_supported = g->sg_supported; - __entry->is_otg = g->is_otg; - __entry->is_a_peripheral = g->is_a_peripheral; - __entry->b_hnp_enable = g->b_hnp_enable; - __entry->a_hnp_support = g->a_hnp_support; - __entry->hnp_polling_support = g->hnp_polling_support; - __entry->host_request_flag = g->host_request_flag; - __entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size; - __entry->quirk_altset_not_supp = g->quirk_altset_not_supp; - __entry->quirk_stall_not_supp = g->quirk_stall_not_supp; - __entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp; - __entry->is_selfpowered = g->is_selfpowered; - __entry->deactivated = g->deactivated; - __entry->connected = g->connected; + __entry->gdw1 = g->dw1; __entry->ret = ret; ), - TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d", + TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d", __entry->speed, __entry->max_speed, __entry->state, __entry->mA, - __entry->sg_supported ? "sg:" : "", - __entry->is_otg ? "OTG:" : "", - __entry->is_a_peripheral ? "a_peripheral:" : "", - __entry->b_hnp_enable ? "b_hnp:" : "", - __entry->a_hnp_support ? "a_hnp:" : "", - __entry->hnp_polling_support ? "hnp_poll:" : "", - __entry->host_request_flag ? "hostreq:" : "", - __entry->quirk_ep_out_aligned_size ? "out_aligned:" : "", - __entry->quirk_altset_not_supp ? "no_altset:" : "", - __entry->quirk_stall_not_supp ? "no_stall:" : "", - __entry->quirk_zlp_not_supp ? "no_zlp" : "", - __entry->is_selfpowered ? "self-powered:" : "bus-powered:", - __entry->deactivated ? "deactivated:" : "activated:", - __entry->connected ? "connected" : "disconnected", - __entry->ret) + tg.sg_supported ? "sg:" : "", + tg.is_otg ? "OTG:" : "", + tg.is_a_peripheral ? "a_peripheral:" : "", + tg.b_hnp_enable ? "b_hnp:" : "", + tg.a_hnp_support ? "a_hnp:" : "", + tg.a_alt_hnp_support ? "a_alt_hnp:" : "", + tg.hnp_polling_support ? "hnp_poll:" : "", + tg.host_request_flag ? "hostreq:" : "", + tg.quirk_ep_out_aligned_size ? "out_aligned:" : "", + tg.quirk_altset_not_supp ? "no_altset:" : "", + tg.quirk_stall_not_supp ? "no_stall:" : "", + tg.quirk_zlp_not_supp ? "no_zlp" : "", + tg.quirk_avoids_skb_reserve ? "no_skb_reserve" : "", + tg.is_selfpowered ? "self-powered:" : "bus-powered:", + tg.deactivated ? "deactivated:" : "activated:", + tg.connected ? "connected" : "disconnected", + tg.lpm_capable ? "lpm-capable" : "", + tg.wakeup_capable ? "wakeup-capable" : "", + tg.wakeup_armed ? "wakeup-armed" : "", + __entry->ret), + TP_printk_init( + struct usb_gadget tg; + tg.dw1 = __entry->gdw1; + ) ); DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number, @@ -141,38 +124,36 @@ DEFINE_EVENT(udc_log_gadget, usb_gadget_activate, TP_ARGS(g, ret) ); -DECLARE_EVENT_CLASS(udc_log_ep, +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_ep, TP_PROTO(struct usb_ep *ep, int ret), TP_ARGS(ep, ret), TP_STRUCT__entry( - __string(name, ep->name) - __field(unsigned, maxpacket) - __field(unsigned, maxpacket_limit) - __field(unsigned, max_streams) - __field(unsigned, mult) - __field(unsigned, maxburst) - __field(u8, address) - __field(bool, claimed) - __field(bool, enabled) + __field(u32, edw3) + __field(u32, edw1) + __field(u32, edw2) __field(int, ret) ), TP_fast_assign( - __assign_str(name, ep->name); - __entry->maxpacket = ep->maxpacket; - __entry->maxpacket_limit = ep->maxpacket_limit; - __entry->max_streams = ep->max_streams; - __entry->mult = ep->mult; - __entry->maxburst = ep->maxburst; - __entry->address = ep->address, - __entry->claimed = ep->claimed; - __entry->enabled = ep->enabled; + __entry->edw3 = ep->dw3; + __entry->edw1 = ep->dw1; + __entry->edw2 = ep->dw2; __entry->ret = ret; ), TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d", - __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, - __entry->max_streams, __entry->mult, __entry->maxburst, - __entry->address, __entry->claimed ? "claimed:" : "released:", - __entry->enabled ? "enabled" : "disabled", ret) + __s, te.maxpacket, te.maxpacket_limit, + te.max_streams, te.mult, te.maxburst, + te.address, te.claimed ? "claimed:" : "released:", + te.enabled ? "enabled" : "disabled", ret), + TP_printk_init( + struct usb_ep te; + char __s[9]; + te.dw1 = __entry->edw1; + te.dw2 = __entry->edw2; + te.dw3 = __entry->edw3; + snprintf(__s, 9, "ep%d%s", te.address, \ + (te.caps.dir_in && te.caps.dir_out) ? "" : \ + te.caps.dir_in ? "in" : "out"); + ) ); DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit, @@ -215,44 +196,47 @@ DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush, TP_ARGS(ep, ret) ); -DECLARE_EVENT_CLASS(udc_log_req, +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_req, TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret), TP_ARGS(ep, req, ret), TP_STRUCT__entry( - __string(name, ep->name) + __field(u32, edw3) __field(unsigned, length) __field(unsigned, actual) __field(unsigned, num_sgs) __field(unsigned, num_mapped_sgs) - __field(unsigned, stream_id) - __field(unsigned, no_interrupt) - __field(unsigned, zero) - __field(unsigned, short_not_ok) + __field(u32, rdw1) __field(int, status) __field(int, ret) __field(struct usb_request *, req) ), TP_fast_assign( - __assign_str(name, ep->name); + __entry->edw3 = ep->dw3; __entry->length = req->length; __entry->actual = req->actual; __entry->num_sgs = req->num_sgs; __entry->num_mapped_sgs = req->num_mapped_sgs; - __entry->stream_id = req->stream_id; - __entry->no_interrupt = req->no_interrupt; - __entry->zero = req->zero; - __entry->short_not_ok = req->short_not_ok; + __entry->rdw1 = req->dw1; __entry->status = req->status; __entry->ret = ret; __entry->req = req; ), TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d", - __get_str(name),__entry->req, __entry->actual, __entry->length, - __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id, - __entry->zero ? "Z" : "z", - __entry->short_not_ok ? "S" : "s", - __entry->no_interrupt ? "i" : "I", - __entry->status, __entry->ret + __s,__entry->req, __entry->actual, __entry->length, + __entry->num_mapped_sgs, __entry->num_sgs, tr.stream_id, + tr.zero ? "Z" : "z", + tr.short_not_ok ? "S" : "s", + tr.no_interrupt ? "i" : "I", + __entry->status, __entry->ret), + TP_printk_init( + struct usb_ep te; + struct usb_request tr; + char __s[9]; + te.dw3 = __entry->edw3; + tr.dw1 = __entry->rdw1; + snprintf(__s, 9, "ep%d%s", te.address, \ + (te.caps.dir_in && te.caps.dir_out) ? "" : \ + te.caps.dir_in ? "in" : "out"); ) );
Save u32 members into trace event ring buffer and parse it for possible bit fields. Use new DECLARE_EVENT_CLASS_PRINT_INIT() class macro for output stage. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> --- drivers/usb/gadget/udc/trace.h | 154 +++++++++++++++------------------ 1 file changed, 69 insertions(+), 85 deletions(-)