@@ -52,6 +52,7 @@
#define BMCIO_RXDZEN BIT(0)
struct rt1711h_chip_info {
+ u32 rxdz_sel;
u16 did;
};
@@ -204,10 +205,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
(cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
rxdz_en = BMCIO_RXDZEN;
- if (chip->info->did == RT1715_DID)
- rxdz_sel = RT1711H_BMCIO_RXDZSEL;
- else
- rxdz_sel = 0;
+ rxdz_sel = chip->info->rxdz_sel;
} else {
rxdz_en = 0;
rxdz_sel = RT1711H_BMCIO_RXDZSEL;
@@ -400,6 +398,7 @@ static const struct rt1711h_chip_info rt1711h = {
};
static const struct rt1711h_chip_info rt1715 = {
+ .rxdz_sel = RT1711H_BMCIO_RXDZSEL,
.did = RT1715_DID,
};
The RT1715 needs 0.35V/0.75V rx threshold for rd/rp whereas it is 0.4V/0.7V for RT1711H. Add rxdz_sel variable to struct rt1711h_chip_info for handling this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Swapped the rxdz_sel variable in struct rt1711h_chip_info to avoid holes. --- drivers/usb/typec/tcpm/tcpci_rt1711h.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)