diff mbox series

[net-next,v2,1/2] r8152: adjust generic_ocp_write function

Message ID 20230726030808.9093-418-nic_swsd@realtek.com
State Superseded
Headers show
Series r8152: reduce control transfer | expand

Commit Message

Hayes Wang July 26, 2023, 3:08 a.m. UTC
Reduce the control transfer if all bytes of first or the last DWORD are
written.

The original method is to split the control transfer into three parts
(the first DWORD, middle continuous data, and the last DWORD). However,
they could be combined if whole bytes of the first DWORD or last DWORD
are written. That is, the first DWORD or the last DWORD could be combined
with the middle continuous data, if the byte_en is 0xff.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0738baa5b82e..f6578a99dbac 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1314,16 +1314,24 @@  static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
 	byteen_end = byteen & BYTE_EN_END_MASK;
 
 	byen = byteen_start | (byteen_start << 4);
-	ret = set_registers(tp, index, type | byen, 4, data);
-	if (ret < 0)
-		goto error1;
 
-	index += 4;
-	data += 4;
-	size -= 4;
+	/* Split the first DWORD if the byte_en is not 0xff */
+	if (byen != BYTE_EN_DWORD) {
+		ret = set_registers(tp, index, type | byen, 4, data);
+		if (ret < 0)
+			goto error1;
 
-	if (size) {
+		index += 4;
+		data += 4;
 		size -= 4;
+	}
+
+	if (size) {
+		byen = byteen_end | (byteen_end >> 4);
+
+		/* Split the last DWORD if the byte_en is not 0xff */
+		if (byen != BYTE_EN_DWORD)
+			size -= 4;
 
 		while (size) {
 			if (size > limit) {
@@ -1350,10 +1358,9 @@  static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
 			}
 		}
 
-		byen = byteen_end | (byteen_end >> 4);
-		ret = set_registers(tp, index, type | byen, 4, data);
-		if (ret < 0)
-			goto error1;
+		/* Set the last DWORD */
+		if (byen != BYTE_EN_DWORD)
+			ret = set_registers(tp, index, type | byen, 4, data);
 	}
 
 error1: