| Message ID | 20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | typec: support Audio Accessory mode on FSA4480 | expand |
Hi Neil, Sorry to keep you waiting. On Wed, Jun 14, 2023 at 03:10:39PM +0200, Neil Armstrong wrote: > Add support for calling typec_set_mode() for the DEBUG, AUDIO > accessory modes. > > Let's also call typec_set_mode() for USB as default and SAFE > when partner is disconnected. > > The USB state is only called when ALT mode is specifically > not specified by the partner status flags in order > to leave the altmode handlers setup the proper mode to > switches, muxes and retimers. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/usb/typec/ucsi/ucsi.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c > index 2b472ec01dc4..44f43cdea5c1 100644 > --- a/drivers/usb/typec/ucsi/ucsi.c > +++ b/drivers/usb/typec/ucsi/ucsi.c > @@ -809,6 +809,23 @@ static void ucsi_partner_change(struct ucsi_connector *con) > break; > } > > + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { > + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { > + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: > + typec_set_mode(con->port, TYPEC_MODE_DEBUG); > + break; > + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: > + typec_set_mode(con->port, TYPEC_MODE_AUDIO); > + break; > + default: > + if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) == > + UCSI_CONSTAT_PARTNER_FLAG_USB) > + typec_set_mode(con->port, TYPEC_STATE_USB); > + } > + } else { > + typec_set_mode(con->port, TYPEC_STATE_SAFE); > + } Can you do that (set safe mode) in ucsi_unregister_partner() instead? thanks,
Hi, On 26/06/2023 10:12, Heikki Krogerus wrote: > Hi Neil, > > Sorry to keep you waiting. No problem, thanks for reviewing my patches! > > On Wed, Jun 14, 2023 at 03:10:39PM +0200, Neil Armstrong wrote: >> Add support for calling typec_set_mode() for the DEBUG, AUDIO >> accessory modes. >> >> Let's also call typec_set_mode() for USB as default and SAFE >> when partner is disconnected. >> >> The USB state is only called when ALT mode is specifically >> not specified by the partner status flags in order >> to leave the altmode handlers setup the proper mode to >> switches, muxes and retimers. >> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >> --- >> drivers/usb/typec/ucsi/ucsi.c | 17 +++++++++++++++++ >> 1 file changed, 17 insertions(+) >> >> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c >> index 2b472ec01dc4..44f43cdea5c1 100644 >> --- a/drivers/usb/typec/ucsi/ucsi.c >> +++ b/drivers/usb/typec/ucsi/ucsi.c >> @@ -809,6 +809,23 @@ static void ucsi_partner_change(struct ucsi_connector *con) >> break; >> } >> >> + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { >> + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { >> + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: >> + typec_set_mode(con->port, TYPEC_MODE_DEBUG); >> + break; >> + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: >> + typec_set_mode(con->port, TYPEC_MODE_AUDIO); >> + break; >> + default: >> + if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) == >> + UCSI_CONSTAT_PARTNER_FLAG_USB) >> + typec_set_mode(con->port, TYPEC_STATE_USB); >> + } >> + } else { >> + typec_set_mode(con->port, TYPEC_STATE_SAFE); >> + } > > Can you do that (set safe mode) in ucsi_unregister_partner() instead? It seems greg already landed the patch into usb-next, but I can send a fix to move it to unregister Neil > > thanks, >
On Mon, Jun 26, 2023 at 03:23:11PM +0200, Neil Armstrong wrote: > Hi, > > On 26/06/2023 10:12, Heikki Krogerus wrote: > > Hi Neil, > > > > Sorry to keep you waiting. > > No problem, thanks for reviewing my patches! > > > > > On Wed, Jun 14, 2023 at 03:10:39PM +0200, Neil Armstrong wrote: > > > Add support for calling typec_set_mode() for the DEBUG, AUDIO > > > accessory modes. > > > > > > Let's also call typec_set_mode() for USB as default and SAFE > > > when partner is disconnected. > > > > > > The USB state is only called when ALT mode is specifically > > > not specified by the partner status flags in order > > > to leave the altmode handlers setup the proper mode to > > > switches, muxes and retimers. > > > > > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > > > --- > > > drivers/usb/typec/ucsi/ucsi.c | 17 +++++++++++++++++ > > > 1 file changed, 17 insertions(+) > > > > > > diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c > > > index 2b472ec01dc4..44f43cdea5c1 100644 > > > --- a/drivers/usb/typec/ucsi/ucsi.c > > > +++ b/drivers/usb/typec/ucsi/ucsi.c > > > @@ -809,6 +809,23 @@ static void ucsi_partner_change(struct ucsi_connector *con) > > > break; > > > } > > > + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { > > > + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { > > > + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: > > > + typec_set_mode(con->port, TYPEC_MODE_DEBUG); > > > + break; > > > + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: > > > + typec_set_mode(con->port, TYPEC_MODE_AUDIO); > > > + break; > > > + default: > > > + if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) == > > > + UCSI_CONSTAT_PARTNER_FLAG_USB) > > > + typec_set_mode(con->port, TYPEC_STATE_USB); > > > + } > > > + } else { > > > + typec_set_mode(con->port, TYPEC_STATE_SAFE); > > > + } > > > > Can you do that (set safe mode) in ucsi_unregister_partner() instead? > > It seems greg already landed the patch into usb-next, but I can send a fix to > move it to unregister Yes please.
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 2b472ec01dc4..44f43cdea5c1 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -809,6 +809,23 @@ static void ucsi_partner_change(struct ucsi_connector *con) break; } + if (con->status.flags & UCSI_CONSTAT_CONNECTED) { + switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) { + case UCSI_CONSTAT_PARTNER_TYPE_DEBUG: + typec_set_mode(con->port, TYPEC_MODE_DEBUG); + break; + case UCSI_CONSTAT_PARTNER_TYPE_AUDIO: + typec_set_mode(con->port, TYPEC_MODE_AUDIO); + break; + default: + if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) == + UCSI_CONSTAT_PARTNER_FLAG_USB) + typec_set_mode(con->port, TYPEC_STATE_USB); + } + } else { + typec_set_mode(con->port, TYPEC_STATE_SAFE); + } + /* Only notify USB controller if partner supports USB data */ if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB)) u_role = USB_ROLE_NONE;
Add support for calling typec_set_mode() for the DEBUG, AUDIO accessory modes. Let's also call typec_set_mode() for USB as default and SAFE when partner is disconnected. The USB state is only called when ALT mode is specifically not specified by the partner status flags in order to leave the altmode handlers setup the proper mode to switches, muxes and retimers. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/usb/typec/ucsi/ucsi.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)