Message ID | 20221107135825.583877-2-herve.codina@bootlin.com |
---|---|
State | Superseded |
Headers | show |
Series | Add the Renesas USBF controller support | expand |
Hi Geert, Oops, my bad I removed all people from the email previously. Re-added them on this reply. On Mon, 7 Nov 2022 20:23:06 +0100 Geert Uytterhoeven <geert@linux-m68k.org> wrote: > Hi Hervé, > > On Mon, Nov 7, 2022 at 5:54 PM Herve Codina <herve.codina@bootlin.com> wrote: > > On Mon, 7 Nov 2022 15:40:53 +0100 > > Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > > On Mon, Nov 7, 2022 at 2:59 PM Herve Codina <herve.codina@bootlin.com> wrote: > > > > The CFG_USB register is located within the system controller. > > > > > > > > We need a helper to get the H2MODE value from the CFG_USB register > > > > without syscon. > > > > > > > > Signed-off-by: Herve Codina <herve.codina@bootlin.com> > > > > > > > --- a/drivers/clk/renesas/r9a06g032-clocks.c > > > > +++ b/drivers/clk/renesas/r9a06g032-clocks.c > > > > @@ -25,6 +25,8 @@ > > > > #include <linux/spinlock.h> > > > > #include <dt-bindings/clock/r9a06g032-sysctrl.h> > > > > > > > > +#define R9A06G032_SYSCTRL_USB 0x00 > > > > +#define R9A06G032_SYSCTRL_USB_H2MODE (1<<1) > > > > #define R9A06G032_SYSCTRL_DMAMUX 0xA0 > > > > > > > > struct r9a06g032_gate { > > > > @@ -341,6 +343,22 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) > > > > } > > > > EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux); > > > > > > > > + > > > > +/* Exported helper to get the H2MODE bit from USB register */ > > > > +int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode) > > > > +{ > > > > + u32 usb; > > > > + > > > > + if (!sysctrl_priv) > > > > + return -EPROBE_DEFER; > > > > + > > > > + usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB); > > > > + *h2mode = (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? true : false; > > > > + > > > > + return 0; > > > > > > Perhaps not pass *h2mode, but just return USB_ROLE_{HOST,DEVICE} > > > (enum usb_role in <linux/usb/role.h>), or a negative error code? > > > > Yes, good idea. > > I will also rename the function : > > enum usb_role r9a06g032_sysctrl_get_usb_role(void); > > > > Is that ok for you or do you prefer that I keep the previous name ? > > r9a06g032_sysctrl_get_usb_role() sounds fine! > But it should return "int", as the return value can be a negative error code, > too. All right, I will do that in v2 series. Thanks, Hervé
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index 1488c9d6e639..c07131c47a9f 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -25,6 +25,8 @@ #include <linux/spinlock.h> #include <dt-bindings/clock/r9a06g032-sysctrl.h> +#define R9A06G032_SYSCTRL_USB 0x00 +#define R9A06G032_SYSCTRL_USB_H2MODE (1<<1) #define R9A06G032_SYSCTRL_DMAMUX 0xA0 struct r9a06g032_gate { @@ -341,6 +343,22 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) } EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux); + +/* Exported helper to get the H2MODE bit from USB register */ +int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode) +{ + u32 usb; + + if (!sysctrl_priv) + return -EPROBE_DEFER; + + usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB); + *h2mode = (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? true : false; + + return 0; +} +EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_get_usb_h2mode); + /* register/bit pairs are encoded as an uint16_t */ static void clk_rdesc_set(struct r9a06g032_priv *clocks, diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h index 066dfb15cbdd..095e00f27309 100644 --- a/include/linux/soc/renesas/r9a06g032-sysctrl.h +++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h @@ -4,8 +4,10 @@ #ifdef CONFIG_CLK_R9A06G032 int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val); +int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode); #else static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; } +static inline int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode) { return -ENODEV; } #endif #endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */
The CFG_USB register is located within the system controller. We need a helper to get the H2MODE value from the CFG_USB register without syscon. Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- drivers/clk/renesas/r9a06g032-clocks.c | 18 ++++++++++++++++++ include/linux/soc/renesas/r9a06g032-sysctrl.h | 2 ++ 2 files changed, 20 insertions(+)