diff mbox series

[v4,9/9] usb: dwc3: gadget: Submit endxfer command if delayed during disconnect

Message ID 20220817182359.13550-10-quic_wcheng@quicinc.com
State Superseded
Headers show
Series [v4,1/9] usb: dwc3: Do not service EP0 and conndone events if soft disconnected | expand

Commit Message

Wesley Cheng Aug. 17, 2022, 6:23 p.m. UTC 
During a cable disconnect sequence, if ep0state is not in the SETUP phase,
then nothing will trigger any pending end transfer commands.  Force
stopping of any pending SETUP transaction, and move back to the SETUP
phase.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4f862552fe00..07d57542ad01 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3776,13 +3776,24 @@  static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 	reg &= ~DWC3_DCTL_INITU2ENA;
 	dwc3_gadget_dctl_write_safe(dwc, reg);
 
+	dwc->connected = false;
+
 	dwc3_disconnect_gadget(dwc);
 
 	dwc->gadget->speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
 	usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
 
-	dwc->connected = false;
+	if (dwc->ep0state != EP0_SETUP_PHASE) {
+		unsigned int    dir;
+
+		dir = !!dwc->ep0_expect_in;
+		if (dwc->ep0state == EP0_DATA_PHASE)
+			dwc3_ep0_end_control_data(dwc, dwc->eps[dir]);
+		else
+			dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]);
+		dwc3_ep0_stall_and_restart(dwc);
+	}
 }
 
 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)