Message ID | 20220713131340.29401-3-johan+linaro@kernel.org |
---|---|
State | New |
Headers | show |
Series | usb: dwc3: add support for SC8280XP | expand |
On 13/07/2022 15:13, Johan Hovold wrote: > Not all platforms have all of the four wakeup interrupts currently > described by the bindings. > > Specifically, MSM8953/6/8 and SDM660 do not use the DP/DM interrupts, > while the SS PHY interrupt is optional on SDM660 and SC7280. > > Note that no devicetree in mainline specify any wakeup interrupts for > > - qcom,ipq4019-dwc3 > - qcom,ipq6018-dwc3 > - qcom,ipq8064-dwc3 > - qcom,ipq8074-dwc3 > - qcom,msm8994-dwc3 > - qcom,qcs404-dwc3 > > but let's keep the schema warnings about that for now. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > .../devicetree/bindings/usb/qcom,dwc3.yaml | 60 +++++++++++++++++-- > 1 file changed, 55 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > index c991d9103f87..fea3e7092ace 100644 > --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > @@ -94,9 +94,11 @@ properties: > - const: apps-usb > > interrupts: > + minItems: 1 > maxItems: 4 > > interrupt-names: > + minItems: 1 > maxItems: 4 > > qcom,select-utmi-as-pipe-clk: > @@ -333,14 +335,9 @@ allOf: > - qcom,ipq6018-dwc3 > - qcom,ipq8064-dwc3 > - qcom,ipq8074-dwc3 > - - qcom,msm8953-dwc3 > - qcom,msm8994-dwc3 > - - qcom,msm8996-dwc3 > - - qcom,msm8998-dwc3 > - qcom,qcs404-dwc3 > - qcom,sc7180-dwc3 > - - qcom,sc7280-dwc3 > - - qcom,sdm660-dwc3 > - qcom,sdm845-dwc3 > - qcom,sdx55-dwc3 > - qcom,sdx65-dwc3 > @@ -369,6 +366,59 @@ allOf: > - const: dm_hs_phy_irq > - const: dp_hs_phy_irq > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8953-dwc3 > + - qcom,msm8996-dwc3 > + - qcom,msm8998-dwc3 > + then: > + properties: > + interrupts: > + maxItems: 2 > + interrupt-names: > + items: > + - const: hs_phy_irq > + - const: ss_phy_irq > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sdm660-dwc3 > + then: > + properties: > + interrupts: > + minItems: 1 > + maxItems: 2 > + interrupt-names: > + minItems: 1 > + items: > + - const: hs_phy_irq > + - const: ss_phy_irq > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sc7280-dwc3 > + then: > + properties: > + interrupts: > + minItems: 3 > + maxItems: 4 > + interrupt-names: > + minItems: 3 > + items: > + - const: hs_phy_irq > + - const: dp_hs_phy_irq > + - const: dm_hs_phy_irq > + - const: ss_phy_irq OK, I see now that you used SC8280XP order matching this one. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > + > - if: > properties: > compatible: Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index c991d9103f87..fea3e7092ace 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -94,9 +94,11 @@ properties: - const: apps-usb interrupts: + minItems: 1 maxItems: 4 interrupt-names: + minItems: 1 maxItems: 4 qcom,select-utmi-as-pipe-clk: @@ -333,14 +335,9 @@ allOf: - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 - - qcom,msm8996-dwc3 - - qcom,msm8998-dwc3 - qcom,qcs404-dwc3 - qcom,sc7180-dwc3 - - qcom,sc7280-dwc3 - - qcom,sdm660-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 @@ -369,6 +366,59 @@ allOf: - const: dm_hs_phy_irq - const: dp_hs_phy_irq + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dwc3 + then: + properties: + interrupts: + minItems: 1 + maxItems: 2 + interrupt-names: + minItems: 1 + items: + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + minItems: 3 + items: + - const: hs_phy_irq + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + - if: properties: compatible:
Not all platforms have all of the four wakeup interrupts currently described by the bindings. Specifically, MSM8953/6/8 and SDM660 do not use the DP/DM interrupts, while the SS PHY interrupt is optional on SDM660 and SC7280. Note that no devicetree in mainline specify any wakeup interrupts for - qcom,ipq4019-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - qcom,msm8994-dwc3 - qcom,qcs404-dwc3 but let's keep the schema warnings about that for now. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- .../devicetree/bindings/usb/qcom,dwc3.yaml | 60 +++++++++++++++++-- 1 file changed, 55 insertions(+), 5 deletions(-)