@@ -585,6 +585,39 @@ spi2: spi@11017000 {
status = "disabled";
};
+ usb0: usb@11200000 {
+ compatible = "mediatek,mt7623-musb",
+ "mediatek,mtk-musb";
+ reg = <0 0x11200000 0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "mc";
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ dr_mode = "otg";
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB0_MCU>,
+ <&pericfg CLK_PERI_USB_SLV>;
+ clock-names = "main","mcu","univpll";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ status = "disabled";
+ };
+
+ u2phy1: t-phy@11210000 {
+ compatible = "mediatek,mt7623-tphy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x11210000 0 0x0800>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port2: usb-phy@11210800 {
+ reg = <0 0x11210800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
audsys: clock-controller@11220000 {
compatible = "mediatek,mt7623-audsys",
"mediatek,mt2701-audsys",
@@ -35,6 +35,10 @@ &scpsys {
clock-names = "ethif";
};
+&usb0 {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
&usb1 {
power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
};
MT7623 has an musb controller that is compatible with the one from MT2701. Signed-off-by: Sungbo Eo <mans0n@gorani.run> --- v3: * remove unnecessary status=okay from u2port2 v2: * rename usb3 label to usb0 * move usb0 & u2phy1 nodes to the right sorted place * disable u2phy1 by default * correct u2port2 node name to match its reg address --- arch/arm/boot/dts/mt7623.dtsi | 33 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ 2 files changed, 37 insertions(+)