diff mbox series

[v5,3/8] arm64: dts: rockchip: optimize clks for rk3399 dwc3

Message ID 20210209192350.7130-3-jbx6244@gmail.com
State Superseded
Headers show
Series [v5,1/8] dt-bindings: usb: convert rockchip,dwc3.txt to yaml | expand

Commit Message

Johan Jonker Feb. 9, 2021, 7:23 p.m. UTC 
From: Wu Liang feng <wulf@rock-chips.com>

Remove unnecessary clocks, refer to rk3399 TRM, aclk_usb3 is the
parent of aclk_usb3otg0/1 and aclk_usb3_grf, and we will enable
aclk_usb3otg0/1 and aclk_usb3_grf, so don't need to enable aclk_usb3
again. In addition, the aclk_usb3_rksoc_axi_perf clk is used for usb3
performance monitor module which we don't use now, so don't need to
enable it.

Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 04f7cc5c3..b125cac89 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -399,11 +399,9 @@ 
 		#size-cells = <2>;
 		ranges;
 		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
+			      "bus_clk", "grf_clk";
 		resets = <&cru SRST_A_USB3_OTG0>;
 		reset-names = "usb3-otg";
 		status = "disabled";
@@ -435,11 +433,9 @@ 
 		#size-cells = <2>;
 		ranges;
 		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
+			      "bus_clk", "grf_clk";
 		resets = <&cru SRST_A_USB3_OTG1>;
 		reset-names = "usb3-otg";
 		status = "disabled";