| Message ID | 1679694482-16430-6-git-send-email-quic_eserrao@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add function suspend/resume and remote wakeup support | expand |
On Fri, Mar 24, 2023, Elson Roy Serrao wrote: > When host sends function suspend feature selector to the device, > inspect the received packet and trigger function suspend or > function resume accordingly. Inspect the remote wakeup bit and > arm the function for remote wakeup if it is wakeup capable. Also > host queries the function wakeup capability through a get status > request before sending function resume. Handle such requests in > composite layer. > > Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> > --- > drivers/usb/gadget/composite.c | 65 ++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 60 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c > index 2111732..d1d7f89 100644 > --- a/drivers/usb/gadget/composite.c > +++ b/drivers/usb/gadget/composite.c > @@ -941,6 +941,9 @@ static void reset_config(struct usb_composite_dev *cdev) > if (f->disable) > f->disable(f); > > + /* Section 9.1.1.6, disable remote wakeup when device is reset */ > + f->func_wakeup_armed = false; > + > bitmap_zero(f->endpoints, 32); > } > cdev->config = NULL; > @@ -2006,9 +2009,20 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) > f = cdev->config->interface[intf]; > if (!f) > break; > - status = f->get_status ? f->get_status(f) : 0; > - if (status < 0) > - break; > + > + if (f->get_status) { > + status = f->get_status(f); > + if (status < 0) > + break; > + } else { > + /* Set D0 and D1 bits based on func wakeup capability */ > + if (f->config->bmAttributes & USB_CONFIG_ATT_WAKEUP) { > + status |= USB_INTRF_STAT_FUNC_RW_CAP; > + if (f->func_wakeup_armed) > + status |= USB_INTRF_STAT_FUNC_RW; > + } > + } > + > put_unaligned_le16(status & 0x0000ffff, req->buf); > break; > /* > @@ -2030,8 +2044,44 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) > if (!f) > break; > value = 0; > - if (f->func_suspend) > + if (f->func_suspend) { > value = f->func_suspend(f, w_index >> 8); > + /* SetFeature(FUNCTION_SUSPEND) */ > + } else if (ctrl->bRequest == USB_REQ_SET_FEATURE) { > + if (!(f->config->bmAttributes & > + USB_CONFIG_ATT_WAKEUP) && > + (w_index & USB_INTRF_FUNC_SUSPEND_RW)) > + break; > + > + f->func_wakeup_armed = !!(w_index & > + USB_INTRF_FUNC_SUSPEND_RW); > + > + if (w_index & USB_INTRF_FUNC_SUSPEND_LP) { > + if (f->suspend && !f->func_suspended) { > + f->suspend(f); > + f->func_suspended = true; > + } > + /* > + * Handle cases where host sends function resume > + * through SetFeature(FUNCTION_SUSPEND) but low power > + * bit reset > + */ > + } else { > + if (f->resume && f->func_suspended) { > + f->resume(f); > + f->func_suspended = false; > + } > + } > + /* ClearFeature(FUNCTION_SUSPEND) */ > + } else if (ctrl->bRequest == USB_REQ_CLEAR_FEATURE) { > + f->func_wakeup_armed = false; > + > + if (f->resume && f->func_suspended) { > + f->resume(f); > + f->func_suspended = false; > + } > + } > + > if (value < 0) { > ERROR(cdev, > "func_suspend() returned error %d\n", > @@ -2574,7 +2624,12 @@ void composite_resume(struct usb_gadget *gadget) > cdev->driver->resume(cdev); > if (cdev->config) { > list_for_each_entry(f, &cdev->config->functions, list) { > - if (f->resume) > + /* > + * Check for func_suspended flag to see if the function is > + * in USB3 FUNCTION_SUSPEND state. In this case resume is > + * done via FUNCTION_SUSPEND feature selector. > + */ > + if (f->resume && !f->func_suspended) > f->resume(f); > } > > -- > 2.7.4 > Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Thanks, Thinh
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 2111732..d1d7f89 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -941,6 +941,9 @@ static void reset_config(struct usb_composite_dev *cdev) if (f->disable) f->disable(f); + /* Section 9.1.1.6, disable remote wakeup when device is reset */ + f->func_wakeup_armed = false; + bitmap_zero(f->endpoints, 32); } cdev->config = NULL; @@ -2006,9 +2009,20 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[intf]; if (!f) break; - status = f->get_status ? f->get_status(f) : 0; - if (status < 0) - break; + + if (f->get_status) { + status = f->get_status(f); + if (status < 0) + break; + } else { + /* Set D0 and D1 bits based on func wakeup capability */ + if (f->config->bmAttributes & USB_CONFIG_ATT_WAKEUP) { + status |= USB_INTRF_STAT_FUNC_RW_CAP; + if (f->func_wakeup_armed) + status |= USB_INTRF_STAT_FUNC_RW; + } + } + put_unaligned_le16(status & 0x0000ffff, req->buf); break; /* @@ -2030,8 +2044,44 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (!f) break; value = 0; - if (f->func_suspend) + if (f->func_suspend) { value = f->func_suspend(f, w_index >> 8); + /* SetFeature(FUNCTION_SUSPEND) */ + } else if (ctrl->bRequest == USB_REQ_SET_FEATURE) { + if (!(f->config->bmAttributes & + USB_CONFIG_ATT_WAKEUP) && + (w_index & USB_INTRF_FUNC_SUSPEND_RW)) + break; + + f->func_wakeup_armed = !!(w_index & + USB_INTRF_FUNC_SUSPEND_RW); + + if (w_index & USB_INTRF_FUNC_SUSPEND_LP) { + if (f->suspend && !f->func_suspended) { + f->suspend(f); + f->func_suspended = true; + } + /* + * Handle cases where host sends function resume + * through SetFeature(FUNCTION_SUSPEND) but low power + * bit reset + */ + } else { + if (f->resume && f->func_suspended) { + f->resume(f); + f->func_suspended = false; + } + } + /* ClearFeature(FUNCTION_SUSPEND) */ + } else if (ctrl->bRequest == USB_REQ_CLEAR_FEATURE) { + f->func_wakeup_armed = false; + + if (f->resume && f->func_suspended) { + f->resume(f); + f->func_suspended = false; + } + } + if (value < 0) { ERROR(cdev, "func_suspend() returned error %d\n", @@ -2574,7 +2624,12 @@ void composite_resume(struct usb_gadget *gadget) cdev->driver->resume(cdev); if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) { - if (f->resume) + /* + * Check for func_suspended flag to see if the function is + * in USB3 FUNCTION_SUSPEND state. In this case resume is + * done via FUNCTION_SUSPEND feature selector. + */ + if (f->resume && !f->func_suspended) f->resume(f); }
When host sends function suspend feature selector to the device, inspect the received packet and trigger function suspend or function resume accordingly. Inspect the remote wakeup bit and arm the function for remote wakeup if it is wakeup capable. Also host queries the function wakeup capability through a get status request before sending function resume. Handle such requests in composite layer. Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> --- drivers/usb/gadget/composite.c | 65 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 5 deletions(-)