@@ -199,6 +199,7 @@ struct mtu3_gpd_ring {
* @id_nb : notifier for iddig(idpin) detection
* @dr_work : work for drd mode switch, used to avoid sleep in atomic context
* @desired_role : role desired to switch
+* @default_role : default mode while usb role is USB_ROLE_NONE
* @role_sw : use USB Role Switch to support dual-role switch, can't use
* extcon at the same time, and extcon is deprecated.
* @role_sw_used : true when the USB Role Switch is used.
@@ -212,6 +213,7 @@ struct otg_switch_mtk {
struct notifier_block id_nb;
struct work_struct dr_work;
enum usb_role desired_role;
+ enum usb_role default_role;
struct usb_role_switch *role_sw;
bool role_sw_used;
bool is_u3_drd;
@@ -137,8 +137,12 @@ static void ssusb_mode_sw_work(struct work_struct *work)
current_role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
- if (desired_role == USB_ROLE_NONE)
+ if (desired_role == USB_ROLE_NONE) {
+ /* the default mode is host as probe does */
desired_role = USB_ROLE_HOST;
+ if (otg_sx->default_role == USB_ROLE_DEVICE)
+ desired_role = USB_ROLE_DEVICE;
+ }
if (current_role == desired_role)
return;
@@ -274,17 +278,29 @@ static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
{
struct usb_role_switch_desc role_sx_desc = { 0 };
struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
+ struct device *dev = ssusb->dev;
+ enum usb_dr_mode mode;
if (!otg_sx->role_sw_used)
return 0;
+ mode = usb_get_role_switch_default_mode(dev);
+ if (mode == USB_DR_MODE_PERIPHERAL)
+ otg_sx->default_role = USB_ROLE_DEVICE;
+ else
+ otg_sx->default_role = USB_ROLE_HOST;
+
role_sx_desc.set = ssusb_role_sw_set;
role_sx_desc.get = ssusb_role_sw_get;
- role_sx_desc.fwnode = dev_fwnode(ssusb->dev);
+ role_sx_desc.fwnode = dev_fwnode(dev);
role_sx_desc.driver_data = ssusb;
- otg_sx->role_sw = usb_role_switch_register(ssusb->dev, &role_sx_desc);
+ otg_sx->role_sw = usb_role_switch_register(dev, &role_sx_desc);
+ if (IS_ERR(otg_sx->role_sw))
+ return PTR_ERR(otg_sx->role_sw);
- return PTR_ERR_OR_ZERO(otg_sx->role_sw);
+ ssusb_set_mode(otg_sx, otg_sx->default_role);
+
+ return 0;
}
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
Support default mode config when use usb-role-switch Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: no changes --- drivers/usb/mtu3/mtu3.h | 2 ++ drivers/usb/mtu3/mtu3_dr.c | 24 ++++++++++++++++++++---- 2 files changed, 22 insertions(+), 4 deletions(-)