@@ -9,7 +9,6 @@
*/
#include <linux/dma-mapping.h>
-#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -1008,12 +1007,25 @@ void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
mtu3_hw_exit(mtu);
}
+bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb)
+{
+ struct mtu3 *mtu = ssusb->u3d;
+
+ /* host only, should wait for ip sleep */
+ if (!mtu)
+ return true;
+
+ /* device is started and pullup D+, ip can sleep */
+ if (mtu->is_active && mtu->softconnect)
+ return true;
+
+ /* ip can't sleep if not pullup D+ when support device mode */
+ return false;
+}
+
int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg)
{
struct mtu3 *mtu = ssusb->u3d;
- void __iomem *ibase = mtu->ippc_base;
- u32 value;
- int ret = 0;
if (!mtu->gadget_driver)
return 0;
@@ -1024,17 +1036,7 @@ int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg)
mtu3_dev_suspend(mtu);
synchronize_irq(mtu->irq);
- /* wait for ip to sleep */
- if (mtu->is_active && mtu->softconnect) {
- ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1,
- value, (value & SSUSB_IP_SLEEP_STS), 100, 100000);
- if (ret) {
- dev_err(mtu->dev, "ip sleep failed!!!\n");
- ret = -EBUSY;
- }
- }
-
- return ret;
+ return 0;
}
int ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg)
@@ -149,6 +149,7 @@ static void ssusb_mode_sw_work(struct work_struct *work)
dev_dbg(ssusb->dev, "set role : %s\n", usb_role_string(desired_role));
mtu3_dbg_trace(ssusb->dev, "set role : %s", usb_role_string(desired_role));
+ pm_runtime_get_sync(ssusb->dev);
switch (desired_role) {
case USB_ROLE_HOST:
@@ -169,6 +170,7 @@ static void ssusb_mode_sw_work(struct work_struct *work)
default:
dev_err(ssusb->dev, "invalid role\n");
}
+ pm_runtime_put(ssusb->dev);
}
static void ssusb_set_mode(struct otg_switch_mtk *otg_sx, enum usb_role role)
@@ -59,6 +59,8 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb);
void ssusb_gadget_exit(struct ssusb_mtk *ssusb);
int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg);
int ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg);
+bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb);
+
#else
static inline int ssusb_gadget_init(struct ssusb_mtk *ssusb)
{
@@ -79,6 +81,12 @@ ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg)
{
return 0;
}
+
+static inline bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb)
+{
+ return true;
+}
+
#endif
@@ -8,7 +8,6 @@
*/
#include <linux/clk.h>
-#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
@@ -254,7 +253,6 @@ int ssusb_host_suspend(struct ssusb_mtk *ssusb)
int num_u3p = ssusb->u3_ports;
int num_u2p = ssusb->u2_ports;
u32 value;
- int ret;
int i;
/* power down u3 ports except skipped ones */
@@ -280,13 +278,7 @@ int ssusb_host_suspend(struct ssusb_mtk *ssusb)
/* power down host ip */
mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
- /* wait for host ip to sleep */
- ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
- (value & SSUSB_IP_SLEEP_STS), 100, 100000);
- if (ret)
- dev_err(ssusb->dev, "ip sleep failed!!!\n");
-
- return ret;
+ return 0;
}
static void ssusb_host_setup(struct ssusb_mtk *ssusb)
@@ -45,6 +45,29 @@ int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
return 0;
}
+static int wait_for_ip_sleep(struct ssusb_mtk *ssusb)
+{
+ bool sleep_check = true;
+ u32 value;
+ int ret;
+
+ if (!ssusb->is_host)
+ sleep_check = ssusb_gadget_ip_sleep_check(ssusb);
+
+ if (!sleep_check)
+ return 0;
+
+ /* wait for ip enter sleep mode */
+ ret = readl_poll_timeout(ssusb->ippc_base + U3D_SSUSB_IP_PW_STS1, value,
+ (value & SSUSB_IP_SLEEP_STS), 100, 100000);
+ if (ret) {
+ dev_err(ssusb->dev, "ip sleep failed!!!\n");
+ ret = -EBUSY;
+ }
+
+ return ret;
+}
+
static int ssusb_phy_init(struct ssusb_mtk *ssusb)
{
int i;
@@ -421,6 +444,28 @@ static int mtu3_remove(struct platform_device *pdev)
return 0;
}
+static int resume_ip_and_ports(struct ssusb_mtk *ssusb, pm_message_t msg)
+{
+ switch (ssusb->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ ssusb_gadget_resume(ssusb, msg);
+ break;
+ case USB_DR_MODE_HOST:
+ ssusb_host_resume(ssusb, false);
+ break;
+ case USB_DR_MODE_OTG:
+ ssusb_host_resume(ssusb, !ssusb->is_host);
+ if (!ssusb->is_host)
+ ssusb_gadget_resume(ssusb, msg);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
{
struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
@@ -432,26 +477,36 @@ static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
case USB_DR_MODE_PERIPHERAL:
ret = ssusb_gadget_suspend(ssusb, msg);
if (ret)
- return ret;
+ goto err;
break;
case USB_DR_MODE_HOST:
ssusb_host_suspend(ssusb);
break;
case USB_DR_MODE_OTG:
- if (!ssusb->is_host)
- return 0;
-
+ if (!ssusb->is_host) {
+ ret = ssusb_gadget_suspend(ssusb, msg);
+ if (ret)
+ goto err;
+ }
ssusb_host_suspend(ssusb);
break;
default:
return -EINVAL;
}
+
+ ret = wait_for_ip_sleep(ssusb);
+ if (ret)
+ goto sleep_err;
+
ssusb_phy_power_off(ssusb);
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
ssusb_wakeup_set(ssusb, true);
- return 0;
+sleep_err:
+ resume_ip_and_ports(ssusb, msg);
+err:
+ return ret;
}
static int mtu3_resume_common(struct device *dev, pm_message_t msg)
@@ -470,24 +525,7 @@ static int mtu3_resume_common(struct device *dev, pm_message_t msg)
if (ret)
goto phy_err;
- switch (ssusb->dr_mode) {
- case USB_DR_MODE_PERIPHERAL:
- ssusb_gadget_resume(ssusb, msg);
- break;
- case USB_DR_MODE_HOST:
- ssusb_host_resume(ssusb, false);
- break;
- case USB_DR_MODE_OTG:
- if (!ssusb->is_host)
- return 0;
-
- ssusb_host_resume(ssusb, true);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
+ return resume_ip_and_ports(ssusb, msg);
phy_err:
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
Support suspend/resume for dual-role mode including the single port and multi-ports supported by host controller, when the host supports mult-ports, only port0 (u2/u3) is used to support dual role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: no changes --- drivers/usb/mtu3/mtu3_core.c | 32 +++++++------- drivers/usb/mtu3/mtu3_dr.c | 2 + drivers/usb/mtu3/mtu3_dr.h | 8 ++++ drivers/usb/mtu3/mtu3_host.c | 10 +---- drivers/usb/mtu3/mtu3_plat.c | 84 ++++++++++++++++++++++++++---------- 5 files changed, 89 insertions(+), 47 deletions(-)