Show patches with: Submitter = Xu Yang       |    State = Action Required       |    Archived = No       |   123 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
[v4] usb: typec: tcpci: fix NULL pointer issue on shared irq case [v4] usb: typec: tcpci: fix NULL pointer issue on shared irq case --- 2024-12-18 Xu Yang New
[v3,2/2] usb: typec: tcpci: set ALERT_MASK register after devm_request_threaded_irq() [v3,1/2] usb: typec: tcpci: fix NULL pointer issue on shared irq case --- 2024-12-17 Xu Yang New
[v3,1/2] usb: typec: tcpci: fix NULL pointer issue on shared irq case [v3,1/2] usb: typec: tcpci: fix NULL pointer issue on shared irq case --- 2024-12-17 Xu Yang New
[v2,2/2] usb: typec: tcpci: write ALERT_MASK after devm_request_threaded_irq() [v2,1/2] usb: typec: tcpci: fix NULL pointer issue on shared irq case --- 2024-12-12 Xu Yang New
usb: typec: tcpci: set local CC to Rd only when cc1/cc2 status is Rp usb: typec: tcpci: set local CC to Rd only when cc1/cc2 status is Rp --- 2024-12-11 Xu Yang New
[v2] usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property [v2] usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT pr... --- 2024-12-09 Xu Yang New
[v11,3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v11,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 --- 2024-12-04 Xu Yang New
[v11,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 [v11,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 --- 2024-12-04 Xu Yang New
usb: chipidea: host: Improve port index sanitizing usb: chipidea: host: Improve port index sanitizing --- 2024-11-29 Xu Yang New
[v2] usb: dwc3: imx8mp: fix software node kernel dump [v2] usb: dwc3: imx8mp: fix software node kernel dump --- 2024-11-26 Xu Yang New
usb: dwc3: imx8mp: fix software node kernel dump usb: dwc3: imx8mp: fix software node kernel dump --- 2024-11-25 Xu Yang New
[v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml [v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml --- 2024-11-19 Xu Yang New
[v10,2/3] arm64: dts: imx95: add usb3 related nodes Untitled series #255495 --- 2024-11-15 Xu Yang New
dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml --- 2024-11-14 Xu Yang New
usb: chipidea: imx: add imx8ulp support usb: chipidea: imx: add imx8ulp support --- 2024-11-11 Xu Yang New
usb: core: hcd: only check primary hcd skip_phy_initialization usb: core: hcd: only check primary hcd skip_phy_initialization --- 2024-11-05 Xu Yang New
usb: dwc3: core: avoid reading register after bus clk is disabled usb: dwc3: core: avoid reading register after bus clk is disabled --- 2024-11-05 Xu Yang New
[v3,2/3] usb: chipidea: udc: improve dTD link logic Untitled series #251701 --- 2024-09-26 Xu Yang New
[v2,2/3] usb: chipidea: udc: limit usb request length to max 16KB Untitled series #251419 --- 2024-09-23 Xu Yang New
[v2,3/3] usb: chipidea: udc: improve error recovery for ISO transfer [v2,1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set --- 2024-09-20 Xu Yang New
[v2,1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set [v2,1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set --- 2024-09-20 Xu Yang New
[2/2] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible [1/2] usb: chipidea: udc: limit usb request length to max 16KB --- 2024-09-12 Xu Yang New
[3/3] usb: chipidea: udc: make isoc endpoint a bit error tolerant [1/3] usb: chipidea: udc: handle USB Error Interrupt if IOC not set --- 2024-09-12 Xu Yang New
[v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" --- 2024-09-11 Xu Yang New
[v4,5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v4,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" --- 2024-09-10 Xu Yang New
[v3,2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 Untitled series #250060 --- 2024-09-03 Xu Yang New
[v3,4/5] arm64: dts: imx95: add usb3 related nodes [v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" --- 2024-08-26 Xu Yang New
[v3,2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95 [v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" --- 2024-08-26 Xu Yang New
usb: chipidea: udc: enable suspend interrupt after usb reset usb: chipidea: udc: enable suspend interrupt after usb reset --- 2024-08-23 Xu Yang New
[RESEND] usb: gadget: uvc: queue pump work in uvcg_video_enable() [RESEND] usb: gadget: uvc: queue pump work in uvcg_video_enable() --- 2024-08-14 Xu Yang New
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET" Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET" --- 2024-08-09 Xu Yang New
[1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" [1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" --- 2024-08-02 Xu Yang New
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message --- 2024-08-02 Xu Yang New
[v2,2/3] arm64: dts: imx8mp-evk: add typec node Untitled series #247525 --- 2024-08-01 Xu Yang New
[2/3] arm64: dts: imx8mp-evk: add typec node Untitled series #247215 --- 2024-07-29 Xu Yang New
[v2,5/6] usb: phy: mxs: enable weak 1p1 regulator for imx6ul during suspend [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty --- 2024-07-26 Xu Yang New
[v2,4/6] usb: phy: mxs: add wakeup enable for imx7ulp [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty --- 2024-07-26 Xu Yang New
[v2,3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty --- 2024-07-26 Xu Yang New
[v2,2/6] usb: phy: mxs: keep USBPHY2's clk always on [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty --- 2024-07-26 Xu Yang New
[v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty --- 2024-07-26 Xu Yang New
[1/6] usb: phy: mxs: Using regulator phy-3p0 [1/6] usb: phy: mxs: Using regulator phy-3p0 --- 2024-07-18 Xu Yang New
[v2] usb: dwc3: core: remove spin_lock/unlock_* to avoid deadlock when suspend gadget [v2] usb: dwc3: core: remove spin_lock/unlock_* to avoid deadlock when suspend gadget --- 2024-05-27 Xu Yang New
[v11,7/7] arm64: dts: imx8mm/n remove clock-names property from usb controller node [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,6/7] arm64: dts: imx93-11x11-evk: enable usb and typec nodes [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,5/7] arm64: dts: imx93: add usb nodes [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,4/7] ARM: dts: imx6: remove fsl,anatop property from usb controller node [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,3/7] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,2/7] arm64: dts: imx8ulp: add usb nodes [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible [v11,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-04-03 Xu Yang New
[v10,11/11] usb: chipidea: ci_hdrc_imx: align usb wakeup clock name with dt-bindings [v10,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-03-21 Xu Yang New
[v10,05/11] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties [v10,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-03-21 Xu Yang New
[v9,07/11] ARM: dts: imx6: remove fsl,anatop property from usb controller node [v9,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-03-15 Xu Yang New
[v8,06/10] dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 [v8,01/10] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-03-12 Xu Yang New
[v8,04/10] dt-bindings: usb: chipidea,usb2-imx: move imx parts to dedicated schema [v8,01/10] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-03-12 Xu Yang New
usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() --- 2024-03-11 Xu Yang New
[v7,07/11] dt-bindings: usb: ci-hdrc-usb2-imx: remove fsl,anatop property [v7,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-28 Xu Yang New
[v7,06/11] dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 [v7,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-28 Xu Yang New
[v7,05/11] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties [v7,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-28 Xu Yang New
[v7,04/11] dt-bindings: usb: ci-hdrc-usb2-imx: move imx parts to dedicated schema [v7,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-28 Xu Yang New
[v6,6/9] dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 [v6,1/9] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-21 Xu Yang New
[v6,4/9] dt-bindings: usb: add NXP ChipIdea USB2 Controller schema [v6,1/9] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-02-21 Xu Yang New
[v5,5/8] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 [v5,1/8] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-01-31 Xu Yang New
[v5,4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties [v5,1/8] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-01-31 Xu Yang New
[v3,2/2] usb: roles: don't get/set_role() when usb_role_switch is unregistered Untitled series #233977 --- 2024-01-29 Xu Yang New
usb: chipidea: core: handle power lost in workqueue usb: chipidea: core: handle power lost in workqueue --- 2024-01-19 Xu Yang New
[v4,5/7] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 [v4,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-01-19 Xu Yang New
[v4,4/7] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties [v4,1/7] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-01-19 Xu Yang New
[v3,4/6] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 [v3,1/6] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible --- 2024-01-12 Xu Yang New
usb: roles: try to get/put all relevant modules usb: roles: try to get/put all relevant modules --- 2024-01-12 Xu Yang New
[v3,3/3] usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host() [v3,1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on --- 2023-12-28 Xu Yang New
[v3,2/3] usb: chipidea: wait controller resume finished for wakeup irq [v3,1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on --- 2023-12-28 Xu Yang New
[v3,1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on [v3,1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on --- 2023-12-28 Xu Yang New
[2/2] usb: typec: tcpci: enable vSafe0v Detection and Auto Discharge Disconnect for PTN5110 [1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() --- 2023-09-14 Xu Yang New
[1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() [1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() --- 2023-09-14 Xu Yang New
usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: reset counter when enter into unattached state after try role --- 2023-08-20 Xu Yang New
[v2,1/2] usb: ehci: add workaround for chipidea PORTSC.PEC bug [v2,1/2] usb: ehci: add workaround for chipidea PORTSC.PEC bug --- 2023-08-09 Xu Yang New
[2/2] usb: chipidea: add workaround for chipidea PEC bug [1/2] usb: ehci: add workaround for chipidea PORTSC.PEC bug --- 2023-08-08 Xu Yang New
[1/2] usb: ehci: add workaround for chipidea PORTSC.PEC bug [1/2] usb: ehci: add workaround for chipidea PORTSC.PEC bug --- 2023-08-08 Xu Yang New
[v2] usb: typec: tcpm: not sink vbus if operational current is 0mA [v2] usb: typec: tcpm: not sink vbus if operational current is 0mA --- 2023-08-01 Xu Yang New
[2/2] usb: ehci: unlink itd/sitds from hardware list if the controller has stopped periodic schedule [1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions --- 2023-07-18 Xu Yang New
[1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions [1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions --- 2023-07-18 Xu Yang New
usb: misc: ehset: fix wrong if condition usb: misc: ehset: fix wrong if condition --- 2023-07-05 Xu Yang New
[v2,2/3] dt-bindings: usb: ci-hdrc-usb2: add fsl,picophy-rise-fall-time-adjust property [v2,1/3] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 --- 2023-06-27 Xu Yang New
[3/3] usb: phy: mxs: disconnect line when USB charger is attached [1/3] usb: chipidea: add USB PHY event --- 2023-06-27 Xu Yang New
[2/3] usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host() [1/3] usb: chipidea: add USB PHY event --- 2023-06-27 Xu Yang New
[1/3] usb: chipidea: add USB PHY event [1/3] usb: chipidea: add USB PHY event --- 2023-06-27 Xu Yang New
[3/3] usb: chipidea: imx: add one samsung picophy parameter tuning implementation [1/3] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 --- 2023-06-26 Xu Yang New
[1/3] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 [1/3] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 --- 2023-06-26 Xu Yang New
[2/2] usb: phy: mxs: add DT bindings to hold data line [1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property --- 2023-06-14 Xu Yang New
[1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property [1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property --- 2023-06-14 Xu Yang New
[v4,2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible [v4,1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format --- 2023-06-13 Xu Yang New
[v4,1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format [v4,1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format --- 2023-06-13 Xu Yang New
usb: typec: tcpci: allow drp toggling for non-drp port usb: typec: tcpci: allow drp toggling for non-drp port --- 2023-06-08 Xu Yang New
[v3,2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible Untitled series #212128 --- 2023-06-08 Xu Yang New
[2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible [1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format --- 2023-06-01 Xu Yang New
[1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format [1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format --- 2023-06-01 Xu Yang New
[1/2] dt-bindings: usb: ci-hdrc-usb2: add fsl,imx8ulp-usb compatible [1/2] dt-bindings: usb: ci-hdrc-usb2: add fsl,imx8ulp-usb compatible --- 2023-05-30 Xu Yang New
[RESEND,v2] usb: chipidea: debug: remove redundant 'role' debug file [RESEND,v2] usb: chipidea: debug: remove redundant 'role' debug file --- 2023-03-17 Xu Yang New
[RESEND,v2,2/2] usb: chipidea: core: fix possible concurrent when switch role Untitled series #204371 --- 2023-03-17 Xu Yang New
[RESEND,v2,1/2] usb: chipdea: core: fix return -EINVAL if request role is the same with current role [RESEND,v2,1/2] usb: chipdea: core: fix return -EINVAL if request role is the same with current role --- 2023-03-17 Xu Yang New
« 1 2 »