mbox series

[v2,0/4] Add support for new IMX8MP based board

Message ID 20240920080154.1595808-1-michal.vokac@ysoft.com
Headers show
Series Add support for new IMX8MP based board | expand

Message

Michal Vokáč Sept. 20, 2024, 8:01 a.m. UTC 
Hi,

this series adds support for a new member in our IOTA platform.
The board is based on the i.MX8MP SoC. The first two patches
add support for most of the board functionality except USB Type-C
port and some other minor things.

[PATCH 3] adds new device tree binding for a Diodes Incorporated
PI5USB30213A Type-C Controller and [PATCH 4] enables that port on
the IOTA2 Lumpy board.

We also wrote a driver for that Type-C port controller. I would like
to get that driver upstream as well but I expect it will take much
more iterations and effort to get it into mainline-ready shape so
I intentionally excluded it from this series. AFAIK it should not
be a problem to accept a device tree binding for a HW that does not
have a driver in the kernel yet.

Michal Vokáč (2):
  dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
  arm64: dts: imx: Add imx8mp-iota2-lumpy board

Petr Benes (2):
  dt-bindings: usb: Add Diodes Incorporated PI5USB30213A Type-C
    Controller
  arm64: dts: imx8mp-iota2: Enable the USB Type-C port

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../bindings/usb/diodes,pi5usb30213a.yaml     |  88 +++
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mp-iota2-lumpy.dts | 518 ++++++++++++++++++
 4 files changed, 608 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/diodes,pi5usb30213a.yaml
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts