mbox series

[v2,0/6] Rongpin RP-H6B support (and support for GL850G)

Message ID 20221202081647.3183870-1-uwu@icenowy.me
Headers show
Series Rongpin RP-H6B support (and support for GL850G) | expand

Message

Icenowy Zheng Dec. 2, 2022, 8:16 a.m. UTC 
This patchset adds support for Rongpin RP-H6B, and as a dependency,
power sequence support for its onboard USB hub, GL850G.

The first 3 patches are for GL850G, adding a binding for it and adding
its support to onboard_usb_hub driver.

The last 3 patches are for RP-H6B, also 2 for adding a binding and 1 for
the real DT.

Icenowy Zheng (6):
  dt-bindings: vendor-prefixes: add Genesys Logic
  dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
  usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
  vendor-prefixes: Add Shenzhen Rongpin Electronics Co., Ltd
  dt-bindings: arm: sunxi: add Rongpin RP-H6B board
  arm64: dts: allwinner: h6: add Rongpin RP-H6C SoM and RP-H6B board

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 .../bindings/usb/genesys,gl850g.yaml          |  47 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../boot/dts/allwinner/sun50i-h6-rp-h6b.dts   | 239 ++++++++++++++++++
 .../boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi  | 180 +++++++++++++
 drivers/usb/misc/onboard_usb_hub.c            |   2 +
 drivers/usb/misc/onboard_usb_hub.h            |   5 +
 8 files changed, 484 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6b.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi

Comments

Matthias Kaehlcke Dec. 2, 2022, 4:52 p.m. UTC | #1 
On Fri, Dec 02, 2022 at 04:16:44PM +0800, Icenowy Zheng wrote:
> Genesys Logic GL850G is a 4-port USB 2.0 STT hub that has a reset pin to
> toggle and a 3.3V core supply exported (although an integrated LDO is
> available for powering it with 5V).
> 
> Add the support for this hub, for controlling the reset pin and the core
> power supply.
> 
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>

Acked-by: Matthias Kaehlcke <mka@chromium.org>

> ---
> Changes in v2:
> - Sort things, by names or vendor IDs.
> 
>  drivers/usb/misc/onboard_usb_hub.c | 2 ++
>  drivers/usb/misc/onboard_usb_hub.h | 5 +++++
>  2 files changed, 7 insertions(+)
> 
> diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
> index d63c63942af1..94e7966e199d 100644
> --- a/drivers/usb/misc/onboard_usb_hub.c
> +++ b/drivers/usb/misc/onboard_usb_hub.c
> @@ -331,6 +331,7 @@ static struct platform_driver onboard_hub_driver = {
>  
>  /************************** USB driver **************************/
>  
> +#define VENDOR_ID_GENESYS	0x05e3
>  #define VENDOR_ID_MICROCHIP	0x0424
>  #define VENDOR_ID_REALTEK	0x0bda
>  #define VENDOR_ID_TI		0x0451
> @@ -407,6 +408,7 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
>  }
>  
>  static const struct usb_device_id onboard_hub_id_table[] = {
> +	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
>  	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
> diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
> index 34beab8bce3d..62129a6a1ba5 100644
> --- a/drivers/usb/misc/onboard_usb_hub.h
> +++ b/drivers/usb/misc/onboard_usb_hub.h
> @@ -22,10 +22,15 @@ static const struct onboard_hub_pdata ti_tusb8041_data = {
>  	.reset_us = 3000,
>  };
>  
> +static const struct onboard_hub_pdata genesys_gl850g_data = {
> +	.reset_us = 3,
> +};
> +
>  static const struct of_device_id onboard_hub_match[] = {
>  	{ .compatible = "usb424,2514", .data = &microchip_usb424_data, },
>  	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
>  	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
> +	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
>  	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },
>  	{ .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
>  	{ .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
> -- 
> 2.38.1
>
Samuel Holland Dec. 3, 2022, 2:02 a.m. UTC | #2 
On 12/2/22 02:16, Icenowy Zheng wrote:
> Rongpin RP-H6B is a development board with RP-H6C SoM, which uses an
> Allwinner H6 SoC.
> 
> Add compatible strings for it, including the board-specific compatible
> and the SoM compatible.
> 
> Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes in v2:
> - Add Krzysztof's ACK.
> 
>  Documentation/devicetree/bindings/arm/sunxi.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)

Reviewed-by: Samuel Holland <samuel@sholland.org>