mbox series

[0/5] thunderbolt: net: Enable full end-to-end flow control

Message ID 20220830153250.15496-1-mika.westerberg@linux.intel.com
Headers show
Series thunderbolt: net: Enable full end-to-end flow control | expand

Message

Mika Westerberg Aug. 30, 2022, 3:32 p.m. UTC 
Hi all,

Thunderbolt/USB4 host controllers support full end-to-end flow control
that prevents dropping packets if there are not enough hardware receive
buffers. So far it has not been enabled for the networking driver yet
but this series changes that. There is one snag though: the second
generation (Intel Falcon Ridge) had a bug that needs special quirk to
get it working. We had that in the early stages of the Thunderbolt/USB4
driver but it got dropped because it was not needed at the time. Now we
add it back as a quirk for the host controller (NHI).

The first patch of this series is a bugfix that I'm planning to push for
v6.0-rc. Rest are v6.1 material. This also includes a patch that shows
the XDomain link type in sysfs the same way we do for USB4 routers and
updates the networking driver module description.

Mika Westerberg (5):
  net: thunderbolt: Enable DMA paths only after rings are enabled
  thunderbolt: Show link type for XDomain connections too
  thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
  net: thunderbolt: Enable full end-to-end flow control
  net: thunderbolt: Update module description with mention of USB4

 drivers/net/thunderbolt.c       | 62 +++++++++++++++++++++------------
 drivers/thunderbolt/nhi.c       | 49 ++++++++++++++++++++++----
 drivers/thunderbolt/tb.c        |  8 ++---
 drivers/thunderbolt/tb.h        |  2 +-
 drivers/thunderbolt/usb4.c      |  8 +++--
 drivers/thunderbolt/usb4_port.c |  2 ++
 include/linux/thunderbolt.h     |  2 ++
 7 files changed, 96 insertions(+), 37 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Aug. 31, 2022, 1:20 p.m. UTC | #1 
Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Tue, 30 Aug 2022 18:32:45 +0300 you wrote:
> Hi all,
> 
> Thunderbolt/USB4 host controllers support full end-to-end flow control
> that prevents dropping packets if there are not enough hardware receive
> buffers. So far it has not been enabled for the networking driver yet
> but this series changes that. There is one snag though: the second
> generation (Intel Falcon Ridge) had a bug that needs special quirk to
> get it working. We had that in the early stages of the Thunderbolt/USB4
> driver but it got dropped because it was not needed at the time. Now we
> add it back as a quirk for the host controller (NHI).
> 
> [...]

Here is the summary with links:
  - [1/5] net: thunderbolt: Enable DMA paths only after rings are enabled
    https://git.kernel.org/netdev/net-next/c/ff7cd07f3064
  - [2/5] thunderbolt: Show link type for XDomain connections too
    https://git.kernel.org/netdev/net-next/c/f9cad07b840e
  - [3/5] thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
    https://git.kernel.org/netdev/net-next/c/54669e2f17cb
  - [4/5] net: thunderbolt: Enable full end-to-end flow control
    https://git.kernel.org/netdev/net-next/c/8bdc25cf62c7
  - [5/5] net: thunderbolt: Update module description with mention of USB4
    https://git.kernel.org/netdev/net-next/c/e550ed4b87ad

You are awesome, thank you!