mbox series

[v2,0/9] Raspberry Pi 4 USB firmware initialization rework

Message ID 20200609175003.19793-1-nsaenzjulienne@suse.de
Headers show
Series Raspberry Pi 4 USB firmware initialization rework | expand

Message

Nicolas Saenz Julienne June 9, 2020, 5:49 p.m. UTC 
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
co-processor, VideoCore. This series reworks how we handle this.

The previous solution makes use of PCI quirks and exporting platform
specific functions. Albeit functional it feels pretty shoehorned. This
proposes an alternative way of handling the triggering of the xHCI chip
initialization trough means of a reset controller.

The benefits are pretty evident: less platform churn in core xHCI code,
and no explicit device dependency management in pcie-brcmstb.

Note that patch #1 depend on another series[1].

The series is based on next-20200605.

v1: https://lore.kernel.org/linux-usb/20200608192701.18355-1-nsaenzjulienne@suse.de/T/#t

[1] https://lwn.net/ml/linux-kernel/cover.662a8d401787ef33780d91252a352de91dc4be10.1590594293.git-series.maxime@cerno.tech/

---

Changes since v1:
 - Rework reset controller so it's less USB centric.
 - Use correct reset controller API in xhci-pci
 - Correct typos

Nicolas Saenz Julienne (9):
  dt-bindings: reset: Add a binding for the RPi Firmware reset
    controller
  reset: Add Raspberry Pi 4 firmware reset controller
  ARM: dts: bcm2711: Add firmware usb reset node
  ARM: dts: bcm2711: Add reset controller to xHCI node
  usb: xhci-pci: Add support for reset controllers
  Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk"
  usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4
  Revert "firmware: raspberrypi: Introduce vl805 init routine"
  Revert "PCI: brcmstb: Wait for Raspberry Pi's firmware when present"

 .../arm/bcm/raspberrypi,bcm2835-firmware.yaml |  21 +++
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts         |  12 ++
 drivers/firmware/Kconfig                      |   3 +-
 drivers/firmware/raspberrypi.c                |  61 ---------
 drivers/pci/controller/pcie-brcmstb.c         |  17 ---
 drivers/reset/Kconfig                         |  11 ++
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-raspberrypi.c             | 126 ++++++++++++++++++
 drivers/usb/host/pci-quirks.c                 |  22 ++-
 drivers/usb/host/xhci-pci.c                   |   7 +
 include/soc/bcm2835/raspberrypi-firmware.h    |   7 -
 11 files changed, 188 insertions(+), 100 deletions(-)
 create mode 100644 drivers/reset/reset-raspberrypi.c