mbox series

[v1,0/2] usb : phy: Add USB PHY support on Intel LGM SoC

Message ID 20200609110850.43469-1-vadivel.muruganx.ramuthevar@linux.intel.com
Headers show
Series usb : phy: Add USB PHY support on Intel LGM SoC | expand

Message

Ramuthevar,Vadivel MuruganX June 9, 2020, 11:08 a.m. UTC 
The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable

Ramuthevar Vadivel Murugan (2):
  dt-bindings: usb: Add USB PHY support for Intel LGM SoC
  usb: phy: Add USB3 PHY support for Intel LGM SoC

 .../devicetree/bindings/usb/intel,lgm-usb-phy.yaml |  53 ++++
 drivers/usb/phy/Kconfig                            |  11 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-lgm-usb.c                      | 269 +++++++++++++++++++++
 4 files changed, 334 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
 create mode 100644 drivers/usb/phy/phy-lgm-usb.c