From patchwork Wed Dec 11 20:54:48 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: David Lechner X-Patchwork-Id: 849664 Received: from mail-ot1-f50.google.com (mail-ot1-f50.google.com [209.85.210.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E05442288D0 for ; Wed, 11 Dec 2024 20:55:16 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.50 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733950519; cv=none; b=TEVeMgetALIkcmq7BBs06O7DqLzXFoYLqKKmKE6apm09pWfbq5WZOP8hYKImDL0x9ffl5CyNPhEJud206n9KOcJub4o2u7m9et3HZY6yrEOekwURlylef7r+KPWcZeoweV1kiueGsfsxlZx6UwIpUuqSukeixghBY7Za5TOgOwA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733950519; c=relaxed/simple; bh=VZ/YwavR6N31puyPe6nsp32O5zBdZ+orvym1UmTOrl0=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=nml3MtiIVTLfK69DfCg9vaZR01EEFqf1B+8YwjShpMuGSYETGYrRfEl7MHOp3BWX/96nTLXmtljdYO6kbc7KnJeQjoPiznTAqohsr9MUVaDap8h4gu9A9Y9jVB5vCpPCJUB2Bq4/8a8pP/T9th4xjaRaiQVXQCzZ3DM6PHcbfeQ= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=NZgauuA9; arc=none smtp.client-ip=209.85.210.50 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="NZgauuA9" Received: by mail-ot1-f50.google.com with SMTP id 46e09a7af769-71e16519031so539726a34.1 for ; Wed, 11 Dec 2024 12:55:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1733950516; x=1734555316; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=q6hO0WOY+hz9HGePeUohTIasiE4zWiY+iKplztZrAkg=; b=NZgauuA9AoXBeT/M8ShASIbUtOhho1EM5o2FHqjqKS3Srw4Teym9FIiVMxr2mpDMTk lZcjL3NV6MvarX62sWyJr64ZFTuS26MHzZZ6TXxOcytOGEyfj+jf4D/OCJcYQHS8yxy0 6G+lRwBJN7GbyBCVtL4yeB350manERFWHaCTAVTkOFXQqgmp4fQ36nfCFt/NbGZ26uQT FFD+9fNLuKJV3ewVdpoIO/11Bzr1bmdpAdkXzww7GPeKZ8tZXkNAiqsbPLM6DV2M7PB6 YlwyB9xmnuvK9Gz0+tShxjBrmgUhM4UUcv8vYOeqvG1FsmHxVlXWA3IOKaIZU4B4t7w0 Emfg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1733950516; x=1734555316; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=q6hO0WOY+hz9HGePeUohTIasiE4zWiY+iKplztZrAkg=; b=TWgap00Z1LvqXM2s4AnYrDOUmv6E7JkH+bgorEbI6N7GjtagaRkpp8wyKUc42uB5ry MFvYHGP0TVGFnjK6SlS5RgSHSIRXlyN8LaAvarB/rlkVZygZphPEWxNFIykuEEE/xKTg KS9teRjZuQm5zFaA4BcDTJ5Q/C1tOw3EWzlbRYjbuZoXnWT1+Axh3LgkvYRX3S5XqxkX WeDO0SGrKrmehN5qp+cQhm6w3Hua7dJAWsqjXYmNIaeg0q81FXyeyugE+/vreylYhhvF JarWlnzRpm01yZvv8skytCYKGhI1+7ILxIqtxs7vWAtd0GrEK6p1u3SPi6e3wF8bWzEY Hn8w== X-Forwarded-Encrypted: i=1; AJvYcCVky7i+PUnwlDtRyxNDgzZnFYXIugbn6Y7MMpf5XbHbSCbysouU5ccu9ND1a1JveQPNTAbCvo/UY1M=@vger.kernel.org X-Gm-Message-State: AOJu0YxFEu6ucTNwkoZ2uTbRs59pMtkevNBSNzXc7R+HoSsJ6AUYoOnO L0oOYY416U3YEPYcVyU9smmW4782fPYqJ8QzLzH7YdSOL/hE3MgeFrjY6xE1Pjw= X-Gm-Gg: ASbGncuuPs97iA90YTeu6tY4rd7ku/yUiALsKKieFtLi0IWLr1ZwXcJoeoIAxs1rBen /NPwPn5+yBjO0H9yxkH9PE4oWSZZ27681g1CigtnxNjZgoWgv1+znk/dx4isbjR3wSnNMG0pu6n qTEsRF1AsXBSJm5lMCZuYZCFJpx1vA8cs0au66nU09M/tlVDqMbzzQ0xBvT89QqzZ0sg+gM8MA2 8w8dIUoL4JuFZWNuuZUquUQOySrknko7b7chDYIS4Crje+oG6tOHXQldPpTbGXUcXgS6pcjJ0Ea sebO2+/X3w== X-Google-Smtp-Source: AGHT+IHb1oORKLdRGyRTnUrtVj3EkyeE9CvWai9FRmcovMJCbgLiwZu4IVnlqFZDgdV6Bj5B1wELpg== X-Received: by 2002:a05:6830:7009:b0:71e:30e:e022 with SMTP id 46e09a7af769-71e2a7d7df1mr372599a34.10.1733950515995; Wed, 11 Dec 2024 12:55:15 -0800 (PST) Received: from [127.0.1.1] (ip98-183-112-25.ok.ok.cox.net. [98.183.112.25]) by smtp.gmail.com with ESMTPSA id 46e09a7af769-71def651fb2sm1888288a34.27.2024.12.11.12.55.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 11 Dec 2024 12:55:15 -0800 (PST) From: David Lechner Date: Wed, 11 Dec 2024 14:54:48 -0600 Subject: [PATCH v6 11/17] iio: adc: ad7944: add support for SPI offload Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241211-dlech-mainline-spi-engine-offload-2-v6-11-88ee574d5d03@baylibre.com> References: <20241211-dlech-mainline-spi-engine-offload-2-v6-0-88ee574d5d03@baylibre.com> In-Reply-To: <20241211-dlech-mainline-spi-engine-offload-2-v6-0-88ee574d5d03@baylibre.com> To: Mark Brown , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , =?utf-8?q?Nuno_S=C3=A1?= Cc: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Michael Hennerich , Lars-Peter Clausen , David Jander , Martin Sperl , linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, linux-pwm@vger.kernel.org, Jonathan Cameron , David Lechner X-Mailer: b4 0.14.2 Add support for SPI offload to the ad7944 driver. This allows reading data at the max sample rate of 2.5 MSPS. Reviewed-by: Jonathan Cameron Signed-off-by: David Lechner Reviewed-by: Nuno Sa --- v6 changes: * More detailed comments on offload channels info struct. (I didn't put them inside the macro because the multiline comments don't play well with the line continuation "\".) v5 changes: * Remove dev_info() message. * Implement sampling_frequency_available attribute. * Limit max sample rate to chip-specific value. v4 changes: * Adapted to changes in other patches. * Add new separate channel spec for when using SPI offload. * Fixed some nitpicks. v3 changes: * Finished TODOs. * Adapted to changes in other patches. v2 changes: In the previous version, there was a new separate driver for the PWM trigger and DMA hardware buffer. This was deemed too complex so they are moved into the ad7944 driver. It has also been reworked to accommodate for the changes described in the other patches. --- drivers/iio/adc/Kconfig | 1 + drivers/iio/adc/ad7944.c | 291 ++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 276 insertions(+), 16 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index a3e8ac569ce4c6b6b30b48acb265d530aa98e89c..995b9cacbaa964d26424346120c139858f93cdcd 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -360,6 +360,7 @@ config AD7923 config AD7944 tristate "Analog Devices AD7944 and similar ADCs driver" depends on SPI + select SPI_OFFLOAD select IIO_BUFFER select IIO_TRIGGERED_BUFFER help diff --git a/drivers/iio/adc/ad7944.c b/drivers/iio/adc/ad7944.c index 6d1202bd55a013b092ff803f2065fd128dfa9bdd..07984eb450e82fc06d67fa0a157e3ae4e7555678 100644 --- a/drivers/iio/adc/ad7944.c +++ b/drivers/iio/adc/ad7944.c @@ -16,11 +16,14 @@ #include #include #include +#include #include #include +#include #include #include +#include #include #include @@ -54,6 +57,12 @@ struct ad7944_adc { enum ad7944_spi_mode spi_mode; struct spi_transfer xfers[3]; struct spi_message msg; + struct spi_transfer offload_xfers[2]; + struct spi_message offload_msg; + struct spi_offload *offload; + struct spi_offload_trigger *offload_trigger; + unsigned long offload_trigger_hz; + int sample_freq_range[3]; void *chain_mode_buf; /* Chip-specific timing specifications. */ const struct ad7944_timing_spec *timing_spec; @@ -81,6 +90,8 @@ struct ad7944_adc { /* quite time before CNV rising edge */ #define AD7944_T_QUIET_NS 20 +/* minimum CNV high time to trigger conversion */ +#define AD7944_T_CNVH_NS 10 static const struct ad7944_timing_spec ad7944_timing_spec = { .conv_ns = 420, @@ -95,7 +106,9 @@ static const struct ad7944_timing_spec ad7986_timing_spec = { struct ad7944_chip_info { const char *name; const struct ad7944_timing_spec *timing_spec; + u32 max_sample_rate_hz; const struct iio_chan_spec channels[2]; + const struct iio_chan_spec offload_channels[1]; }; /* get number of bytes for SPI xfer */ @@ -105,13 +118,15 @@ struct ad7944_chip_info { * AD7944_DEFINE_CHIP_INFO - Define a chip info structure for a specific chip * @_name: The name of the chip * @_ts: The timing specification for the chip + * @_max: The maximum sample rate in Hz * @_bits: The number of bits in the conversion result * @_diff: Whether the chip is true differential or not */ -#define AD7944_DEFINE_CHIP_INFO(_name, _ts, _bits, _diff) \ +#define AD7944_DEFINE_CHIP_INFO(_name, _ts, _max, _bits, _diff) \ static const struct ad7944_chip_info _name##_chip_info = { \ .name = #_name, \ .timing_spec = &_ts##_timing_spec, \ + .max_sample_rate_hz = _max, \ .channels = { \ { \ .type = IIO_VOLTAGE, \ @@ -129,13 +144,43 @@ static const struct ad7944_chip_info _name##_chip_info = { \ }, \ IIO_CHAN_SOFT_TIMESTAMP(1), \ }, \ + .offload_channels = { \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .differential = _diff, \ + .channel = 0, \ + .channel2 = _diff ? 1 : 0, \ + .scan_index = 0, \ + .scan_type.sign = _diff ? 's' : 'u', \ + .scan_type.realbits = _bits, \ + .scan_type.storagebits = 32, \ + .scan_type.endianness = IIO_CPU, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \ + | BIT(IIO_CHAN_INFO_SCALE) \ + | BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_separate_available = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + }, \ + }, \ } +/* + * Notes on the offload channels: + * - There is no soft timestamp since everything is done in hardware. + * - There is a sampling frequency attribute added. This controls the SPI + * offload trigger. + * - The storagebits value depends on the SPI offload provider. Currently there + * is only one supported provider, namely the ADI PULSAR ADC HDL project, + * which always uses 32-bit words for data values, even for <= 16-bit ADCs. + * So the value is just hardcoded to 32 for now. + */ + /* pseudo-differential with ground sense */ -AD7944_DEFINE_CHIP_INFO(ad7944, ad7944, 14, 0); -AD7944_DEFINE_CHIP_INFO(ad7985, ad7944, 16, 0); +AD7944_DEFINE_CHIP_INFO(ad7944, ad7944, 2.5 * MEGA, 14, 0); +AD7944_DEFINE_CHIP_INFO(ad7985, ad7944, 2.5 * MEGA, 16, 0); /* fully differential */ -AD7944_DEFINE_CHIP_INFO(ad7986, ad7986, 18, 1); +AD7944_DEFINE_CHIP_INFO(ad7986, ad7986, 2 * MEGA, 18, 1); static int ad7944_3wire_cs_mode_init_msg(struct device *dev, struct ad7944_adc *adc, const struct iio_chan_spec *chan) @@ -239,6 +284,48 @@ static int ad7944_chain_mode_init_msg(struct device *dev, struct ad7944_adc *adc return devm_spi_optimize_message(dev, adc->spi, &adc->msg); } +/* + * Unlike ad7944_3wire_cs_mode_init_msg(), this creates a message that reads + * during the conversion phase instead of the acquisition phase when reading + * a sample from the ADC. This is needed to be able to read at the maximum + * sample rate. It requires the SPI controller to have offload support and a + * high enough SCLK rate to read the sample during the conversion phase. + */ +static int ad7944_3wire_cs_mode_init_offload_msg(struct device *dev, + struct ad7944_adc *adc, + const struct iio_chan_spec *chan) +{ + struct spi_transfer *xfers = adc->offload_xfers; + int ret; + + /* + * CS is tied to CNV and we need a low to high transition to start the + * conversion, so place CNV low for t_QUIET to prepare for this. + */ + xfers[0].delay.value = AD7944_T_QUIET_NS; + xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS; + /* CNV has to be high for a minimum time to trigger conversion. */ + xfers[0].cs_change = 1; + xfers[0].cs_change_delay.value = AD7944_T_CNVH_NS; + xfers[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS; + + /* Then we can read the previous sample during the conversion phase */ + xfers[1].offload_flags = SPI_OFFLOAD_XFER_RX_STREAM; + xfers[1].len = AD7944_SPI_BYTES(chan->scan_type); + xfers[1].bits_per_word = chan->scan_type.realbits; + + spi_message_init_with_transfers(&adc->offload_msg, xfers, + ARRAY_SIZE(adc->offload_xfers)); + + adc->offload_msg.offload = adc->offload; + + ret = devm_spi_optimize_message(dev, adc->spi, &adc->offload_msg); + if (ret) + return dev_err_probe(dev, ret, "failed to prepare offload msg\n"); + + return 0; +} + /** * ad7944_convert_and_acquire - Perform a single conversion and acquisition * @adc: The ADC device structure @@ -294,6 +381,23 @@ static int ad7944_single_conversion(struct ad7944_adc *adc, return IIO_VAL_INT; } +static int ad7944_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct ad7944_adc *adc = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = adc->sample_freq_range; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + default: + return -EINVAL; + } +} + static int ad7944_read_raw(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, int *val, int *val2, long info) @@ -326,13 +430,104 @@ static int ad7944_read_raw(struct iio_dev *indio_dev, return -EINVAL; } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = adc->offload_trigger_hz; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int ad7944_set_sample_freq(struct ad7944_adc *adc, int val) +{ + struct spi_offload_trigger_config config = { + .type = SPI_OFFLOAD_TRIGGER_PERIODIC, + .periodic = { + .frequency_hz = val, + }, + }; + int ret; + + ret = spi_offload_trigger_validate(adc->offload_trigger, &config); + if (ret) + return ret; + + adc->offload_trigger_hz = config.periodic.frequency_hz; + + return 0; +} + +static int ad7944_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long info) +{ + struct ad7944_adc *adc = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val < 1 || val > adc->sample_freq_range[2]) + return -EINVAL; + + return ad7944_set_sample_freq(adc, val); default: return -EINVAL; } } +static int ad7944_write_raw_get_fmt(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT; + default: + return IIO_VAL_INT_PLUS_MICRO; + } +} + static const struct iio_info ad7944_iio_info = { + .read_avail = &ad7944_read_avail, .read_raw = &ad7944_read_raw, + .write_raw = &ad7944_write_raw, + .write_raw_get_fmt = &ad7944_write_raw_get_fmt, +}; + +static int ad7944_offload_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7944_adc *adc = iio_priv(indio_dev); + struct spi_offload_trigger_config config = { + .type = SPI_OFFLOAD_TRIGGER_PERIODIC, + .periodic = { + .frequency_hz = adc->offload_trigger_hz, + }, + }; + int ret; + + gpiod_set_value_cansleep(adc->turbo, 1); + + ret = spi_offload_trigger_enable(adc->offload, adc->offload_trigger, + &config); + if (ret) + gpiod_set_value_cansleep(adc->turbo, 0); + + return ret; +} + +static int ad7944_offload_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7944_adc *adc = iio_priv(indio_dev); + + spi_offload_trigger_disable(adc->offload, adc->offload_trigger); + gpiod_set_value_cansleep(adc->turbo, 0); + + return 0; +} + +static const struct iio_buffer_setup_ops ad7944_offload_buffer_setup_ops = { + .postenable = &ad7944_offload_buffer_postenable, + .predisable = &ad7944_offload_buffer_predisable, }; static irqreturn_t ad7944_trigger_handler(int irq, void *p) @@ -446,6 +641,11 @@ static const char * const ad7944_power_supplies[] = { "avdd", "dvdd", "bvdd", "vio" }; +static const struct spi_offload_config ad7944_offload_config = { + .capability_flags = SPI_OFFLOAD_CAP_TRIGGER | + SPI_OFFLOAD_CAP_RX_STREAM_DMA, +}; + static int ad7944_probe(struct spi_device *spi) { const struct ad7944_chip_info *chip_info; @@ -471,6 +671,10 @@ static int ad7944_probe(struct spi_device *spi) adc->timing_spec = chip_info->timing_spec; + adc->sample_freq_range[0] = 1; /* min */ + adc->sample_freq_range[1] = 1; /* step */ + adc->sample_freq_range[2] = chip_info->max_sample_rate_hz; /* max */ + ret = device_property_match_property_string(dev, "adi,spi-mode", ad7944_spi_modes, ARRAY_SIZE(ad7944_spi_modes)); @@ -590,20 +794,74 @@ static int ad7944_probe(struct spi_device *spi) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &ad7944_iio_info; - if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) { - indio_dev->available_scan_masks = chain_scan_masks; - indio_dev->channels = chain_chan; - indio_dev->num_channels = n_chain_dev + 1; + adc->offload = devm_spi_offload_get(dev, spi, &ad7944_offload_config); + ret = PTR_ERR_OR_ZERO(adc->offload); + if (ret && ret != -ENODEV) + return dev_err_probe(dev, ret, "failed to get offload\n"); + + /* Fall back to low speed usage when no SPI offload available. */ + if (ret == -ENODEV) { + if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) { + indio_dev->available_scan_masks = chain_scan_masks; + indio_dev->channels = chain_chan; + indio_dev->num_channels = n_chain_dev + 1; + } else { + indio_dev->channels = chip_info->channels; + indio_dev->num_channels = ARRAY_SIZE(chip_info->channels); + } + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + ad7944_trigger_handler, + NULL); + if (ret) + return ret; } else { - indio_dev->channels = chip_info->channels; - indio_dev->num_channels = ARRAY_SIZE(chip_info->channels); - } + struct dma_chan *rx_dma; - ret = devm_iio_triggered_buffer_setup(dev, indio_dev, - iio_pollfunc_store_time, - ad7944_trigger_handler, NULL); - if (ret) - return ret; + if (adc->spi_mode != AD7944_SPI_MODE_SINGLE) + return dev_err_probe(dev, -EINVAL, + "offload only supported in single mode\n"); + + indio_dev->setup_ops = &ad7944_offload_buffer_setup_ops; + indio_dev->channels = chip_info->offload_channels; + indio_dev->num_channels = ARRAY_SIZE(chip_info->offload_channels); + + adc->offload_trigger = devm_spi_offload_trigger_get(dev, + adc->offload, SPI_OFFLOAD_TRIGGER_PERIODIC); + if (IS_ERR(adc->offload_trigger)) + return dev_err_probe(dev, PTR_ERR(adc->offload_trigger), + "failed to get offload trigger\n"); + + ret = ad7944_set_sample_freq(adc, 2 * MEGA); + if (ret) + return dev_err_probe(dev, ret, + "failed to init sample rate\n"); + + rx_dma = devm_spi_offload_rx_stream_request_dma_chan(dev, + adc->offload); + if (IS_ERR(rx_dma)) + return dev_err_probe(dev, PTR_ERR(rx_dma), + "failed to get offload RX DMA\n"); + + /* + * REVISIT: ideally, we would confirm that the offload RX DMA + * buffer layout is the same as what is hard-coded in + * offload_channels. Right now, the only supported offload + * is the pulsar_adc project which always uses 32-bit word + * size for data values, regardless of the SPI bits per word. + */ + + ret = devm_iio_dmaengine_buffer_setup_with_handle(dev, + indio_dev, rx_dma, IIO_BUFFER_DIRECTION_IN); + if (ret) + return ret; + + ret = ad7944_3wire_cs_mode_init_offload_msg(dev, adc, + &chip_info->offload_channels[0]); + if (ret) + return ret; + } return devm_iio_device_register(dev, indio_dev); } @@ -638,3 +896,4 @@ module_spi_driver(ad7944_driver); MODULE_AUTHOR("David Lechner "); MODULE_DESCRIPTION("Analog Devices AD7944 PulSAR ADC family driver"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("IIO_DMAENGINE_BUFFER");