@@ -697,9 +697,10 @@ static void nxp_fspi_dll_calibration(struct nxp_fspi *f)
* Value for rest of the CS FLSHxxCR0 register would be zero.
*
*/
-static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi)
+static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi,
+ const struct spi_mem_op *op)
{
- unsigned long rate = spi->max_speed_hz;
+ unsigned long rate = op->max_freq;
int ret;
uint64_t size_kb;
@@ -922,7 +923,7 @@ static int nxp_fspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
FSPI_STS0_ARB_IDLE, 1, POLL_TOUT, true);
WARN_ON(err);
- nxp_fspi_select_mem(f, mem->spi);
+ nxp_fspi_select_mem(f, mem->spi, op);
nxp_fspi_prepare_lut(f, op);
/*
@@ -1134,6 +1135,10 @@ static const struct spi_controller_mem_ops nxp_fspi_mem_ops = {
.get_name = nxp_fspi_get_name,
};
+static const struct spi_controller_mem_caps nxp_fspi_mem_caps = {
+ .per_op_freq = true,
+};
+
static int nxp_fspi_probe(struct platform_device *pdev)
{
struct spi_controller *ctlr;
@@ -1231,6 +1236,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
ctlr->bus_num = -1;
ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
ctlr->mem_ops = &nxp_fspi_mem_ops;
+ ctlr->mem_caps = &nxp_fspi_mem_caps;
nxp_fspi_default_setup(f);
Every ->exec_op() call correctly configures the spi bus speed to the maximum allowed frequency for the memory using the constant spi default parameter. Since we can now have per-operation constraints, let's use the value that comes from the spi-mem operation structure instead. In case there is no specific limitation for this operation, the default spi device value will be given anyway. The per-operation frequency capability is thus advertised to the spi-mem core. Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/spi/spi-nxp-fspi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)