| Message ID | 20241015225434.3970360-3-chris.packham@alliedtelesis.co.nz |
|---|---|
| State | New |
| Headers | show |
| Series | Realtek SPI-NAND controller | expand |
Hi Thomas, On 16/10/24 11:54, Chris Packham wrote: > Add the SPI-NAND controller on the RTL9300 family of devices. This > supports serial/dual/quad data width and DMA for read/program > operations. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Has this one fallen through the cracks? I see you picked up a couple of my other changes for 6.13 but this seems to be missing from mips/linux. > --- > > Notes: > Changes in v4 & v5: > - none > Changes in v3: > - drop wildcard rtl9300-snand compatible > - drop clock-names > Changes in v2: > - Add clocks > > arch/mips/boot/dts/realtek/rtl930x.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi > index f271940f82be..b01a40ec3064 100644 > --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi > +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi > @@ -32,6 +32,8 @@ lx_clk: clock-175mhz { > }; > > &soc { > + ranges = <0x0 0x18000000 0x20000>; > + > intc: interrupt-controller@3000 { > compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; > reg = <0x3000 0x18>, <0x3018 0x18>; > @@ -59,6 +61,17 @@ timer0: timer@3200 { > interrupts = <7>, <8>, <9>, <10>, <11>; > clocks = <&lx_clk>; > }; > + > + snand: spi@1a400 { > + compatible = "realtek,rtl9301-snand"; > + reg = <0x1a400 0x44>; > + interrupt-parent = <&intc>; > + interrupts = <19>; > + clocks = <&lx_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > &uart0 {
On Wed, Nov 20, 2024 at 02:41:15AM +0000, Chris Packham wrote: > Hi Thomas, > > On 16/10/24 11:54, Chris Packham wrote: > > Add the SPI-NAND controller on the RTL9300 family of devices. This > > supports serial/dual/quad data width and DMA for read/program > > operations. > > > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > > Has this one fallen through the cracks? > > I see you picked up a couple of my other changes for 6.13 but this seems > to be missing from mips/linux. hmm, I thought I saw some unresolved problems with the other patches... But if this is all good, I'll add it to my second pull request. Thomas.
On 20/11/24 22:02, Thomas Bogendoerfer wrote: > On Wed, Nov 20, 2024 at 02:41:15AM +0000, Chris Packham wrote: >> Hi Thomas, >> >> On 16/10/24 11:54, Chris Packham wrote: >>> Add the SPI-NAND controller on the RTL9300 family of devices. This >>> supports serial/dual/quad data width and DMA for read/program >>> operations. >>> >>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> >> Has this one fallen through the cracks? >> >> I see you picked up a couple of my other changes for 6.13 but this seems >> to be missing from mips/linux. > hmm, I thought I saw some unresolved problems with the other patches... > But if this is all good, I'll add it to my second pull request. The binding patch got an r-by from Krzysztof. The driver itself was applied by by Mark, it did have a problem but that was fixed with another patch. So from my point of view this is good to go (please speak up if I've missed something). I do intend to add a few more compatibles for other RTL chips that use this spi-nand controller but I'll do that as new patches.
On Wed, Oct 16, 2024 at 11:54:33AM +1300, Chris Packham wrote: > Add the SPI-NAND controller on the RTL9300 family of devices. This > supports serial/dual/quad data width and DMA for read/program > operations. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > > Notes: > Changes in v4 & v5: > - none > Changes in v3: > - drop wildcard rtl9300-snand compatible > - drop clock-names > Changes in v2: > - Add clocks > > arch/mips/boot/dts/realtek/rtl930x.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi > index f271940f82be..b01a40ec3064 100644 > --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi > +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi > @@ -32,6 +32,8 @@ lx_clk: clock-175mhz { > }; > > &soc { > + ranges = <0x0 0x18000000 0x20000>; > + > intc: interrupt-controller@3000 { > compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; > reg = <0x3000 0x18>, <0x3018 0x18>; > @@ -59,6 +61,17 @@ timer0: timer@3200 { > interrupts = <7>, <8>, <9>, <10>, <11>; > clocks = <&lx_clk>; > }; > + > + snand: spi@1a400 { > + compatible = "realtek,rtl9301-snand"; > + reg = <0x1a400 0x44>; > + interrupt-parent = <&intc>; > + interrupts = <19>; > + clocks = <&lx_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > }; > > &uart0 { > -- > 2.47.0 applied to mips-next. Thomas.
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi index f271940f82be..b01a40ec3064 100644 --- a/arch/mips/boot/dts/realtek/rtl930x.dtsi +++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi @@ -32,6 +32,8 @@ lx_clk: clock-175mhz { }; &soc { + ranges = <0x0 0x18000000 0x20000>; + intc: interrupt-controller@3000 { compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; reg = <0x3000 0x18>, <0x3018 0x18>; @@ -59,6 +61,17 @@ timer0: timer@3200 { interrupts = <7>, <8>, <9>, <10>, <11>; clocks = <&lx_clk>; }; + + snand: spi@1a400 { + compatible = "realtek,rtl9301-snand"; + reg = <0x1a400 0x44>; + interrupt-parent = <&intc>; + interrupts = <19>; + clocks = <&lx_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; &uart0 {
Add the SPI-NAND controller on the RTL9300 family of devices. This supports serial/dual/quad data width and DMA for read/program operations. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v4 & v5: - none Changes in v3: - drop wildcard rtl9300-snand compatible - drop clock-names Changes in v2: - Add clocks arch/mips/boot/dts/realtek/rtl930x.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)