From patchwork Wed Feb 28 14:27:55 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Harald Mommer X-Patchwork-Id: 777353 Received: from refb02.tmes.trendmicro.eu (refb02.tmes.trendmicro.eu [18.185.115.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7FA8415957E for ; Wed, 28 Feb 2024 14:29:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=18.185.115.60 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1709130592; cv=fail; b=qn6QEIyOMG+pgrDNbQcu9ilBVrOB8DFfIxmZuBaRt5QhgJx6QVImJ4V4G29/IXQlMKMooAMse0OvG6TOXjq0aXeVBNLqWAniecAL+F3F5DGRdW8qUZQ6j9vc4Sj7lG8F0RZbmrpFFLBdq/TQc6hc5IbOL7ryDNm68bHA7cKxa2s= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1709130592; c=relaxed/simple; bh=wccHaYRRmdaQrFNTjtIYVVqOXBpIk0wQINyYR90rUZw=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version:Content-Type; b=LnhekbZuEOpFPFjO6H5R0JqdnZAbvjXONnL5FAzeVZCAOrGH/qBL593oRCf4hA1/0j+96iqs/2/Fd9o7RRZ4sEgpCz0NdsY4GUGACtt0A70bFqOLm54ghvR/3Ezv/RvDlT1NpaLXRaK/tS/WqH2A3/0V/YCRD7I08LUbUR7Wlxc= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=opensynergy.com; spf=pass smtp.mailfrom=opensynergy.com; dkim=pass (2048-bit key) header.d=opensynergy.com header.i=@opensynergy.com header.b=cSzlfyPx; arc=fail smtp.client-ip=18.185.115.60 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=opensynergy.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=opensynergy.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=opensynergy.com header.i=@opensynergy.com header.b="cSzlfyPx" Received: from 104.47.11.169_.trendmicro.com (unknown [172.21.19.58]) by refb02.tmes.trendmicro.eu (Postfix) with ESMTPS id 53B6910170AEB for ; Wed, 28 Feb 2024 14:28:11 +0000 (UTC) Received: from 104.47.11.169_.trendmicro.com (unknown [172.21.162.72]) by repost01.tmes.trendmicro.eu (Postfix) with SMTP id F2710100017C2; Wed, 28 Feb 2024 14:28:03 +0000 (UTC) X-TM-MAIL-RECEIVED-TIME: 1709130483.586000 X-TM-MAIL-UUID: d98f862d-1a46-4034-8414-4368629b174b Received: from DEU01-FR2-obe.outbound.protection.outlook.com (unknown [104.47.11.169]) by repre01.tmes.trendmicro.eu (Trend Micro Email Security) with ESMTPS id 8F4ED1000030B; Wed, 28 Feb 2024 14:28:03 +0000 (UTC) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=RxVlkl4OwPT0L0Y5GVBXYj5+X+AdyjFllF6uLdTHL9tuCqH1CzaDxqxZl8YdnMQOuT2CxOL+N8KNVGPH29fwqhHh97oPTeV/YLc3A2OYlJn6//Kseay6mMK2sc8nDcnNWoJxy6/+HQ5s5i6hz9aOYJ9whErJNkH4IqkVrbNePViUg72E/YIeZHhup+lTl2Zx7MtdZBVJujDPYTTaOtNfPacTd2byeH5b51QlGlPgF+uaClfFlr270+q6v4+2Zt1aIzTOG8rBiGBzL18WckJO+PKqFE2aIdkro6+bMRMWmlzWqWnsFknMYRZyTnRwM4YI1wxvwVsjZqcDF2Mo+IvpgA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=uCmlABCO8fDFjHyDcjgORV1Mb1fcDEegzdNLOOic0D0=; b=A1PY4U/itGyNoAscqWWyPr+oJVd9hyeFs4SJPrvRbXdKW/m0tfMiNqcyXGWcG8N/9yCJL9CMbZorKiW4ttlDD3C2jf19pGYZvk50HYH/Gsai3gW7glVoGThFeETwS5r/IGk3HD0KAuhAcdqR66V/8myVhosGBgryUBJXrjwc3i6mJzeMzkgrhV9Z/k1o0+XDDn2oEVaqe/WXZPv8RrwsKvYxJAe0tdPipcPxyEXPNcAIlYB8FefN0EveatbO2OhunwFMup53xNsGiKfRrJ7h5MEwG9bbjZMdP96/+idFz5BWNYeu5HyjUvexzTaY3PZEfxE8pHpE5wOB3XkVJaSiCw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 217.66.60.4) smtp.rcpttodomain=kernel.org smtp.mailfrom=opensynergy.com; dmarc=pass (p=reject sp=reject pct=100) action=none header.from=opensynergy.com; dkim=none (message not signed); arc=none (0) X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 217.66.60.4) smtp.mailfrom=opensynergy.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=opensynergy.com; Received-SPF: Pass (protection.outlook.com: domain of opensynergy.com designates 217.66.60.4 as permitted sender) receiver=protection.outlook.com; client-ip=217.66.60.4; helo=SR-MAIL-03.open-synergy.com; pr=C From: Harald Mommer To: virtio-dev@lists.oasis-open.org, Haixu Cui , Mark Brown , Viresh Kumar , linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org Cc: quic_ztu@quicinc.com, Matti Moell , Mikhail Golubev , Harald Mommer , Harald Mommer Subject: [PATCH v1 3/3] virtio-spi: Add virtio SPI driver. Date: Wed, 28 Feb 2024 15:27:55 +0100 Message-Id: <20240228142755.4061-4-Harald.Mommer@opensynergy.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240228142755.4061-1-Harald.Mommer@opensynergy.com> References: <20240228142755.4061-1-Harald.Mommer@opensynergy.com> Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AMS0EPF000001A8:EE_|BEZP281MB3062:EE_ X-MS-Office365-Filtering-Correlation-Id: 51dc0404-23d9-491f-33dc-08dc386977ca X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:217.66.60.4; CTRY:DE; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SR-MAIL-03.open-synergy.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230031)(82310400014)(36860700004); DIR:OUT; SFP:1102; X-OriginatorOrg: opensynergy.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 28 Feb 2024 14:28:01.1448 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 51dc0404-23d9-491f-33dc-08dc386977ca X-MS-Exchange-CrossTenant-Id: 800fae25-9b1b-4edc-993d-c939c4e84a64 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=800fae25-9b1b-4edc-993d-c939c4e84a64; Ip=[217.66.60.4]; Helo=[SR-MAIL-03.open-synergy.com] X-MS-Exchange-CrossTenant-AuthSource: AMS0EPF000001A8.eurprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BEZP281MB3062 X-TM-AS-ERS: 104.47.11.169-0.0.0.0 X-TMASE-Version: StarCloud-1.3-9.1.1015-28218.007 X-TMASE-Result: 10--13.787800-4.000000 X-TMASE-MatchedRID: HE8hON2ynzcAsgl6PZgqJOkI20Cl55uDgz5VmKZ8x87hCm8am+SP54vP iBq/iW91MpPx8OFzfY0zJJn1odE+3zVxLV/TD3CFsX4aFYAMIYPIQQwRv8gPjskXIF34mJLKOnp NWpJkOQuTIJr1EFP8Nn7U1eUtsS59MsZYFnBjXTWF3V/JMHm7u781t3rGD+B++wWpop+OSdw4As RtUisW+DmvcaGRO/Oh31jKtZ+jlPPy8yPa5oCwl4WEan0Y08OtfJ3eYkN7pTES6lv5p9KHVZtjb vEw2yYya+t98YxCbwSI47i1GQb7nS1CuW+6P3e+BA/ZR5qnp8O4UL3v//+17eY6m/6o4hAKqFty 1HMHrV6ZNA2b+iaOd6EA84aOEbsGODSqp4i2jlcKonRFsndtvYo3KQs0iA9hiGVApiRLArkow1L HBmlcNps6E2fc3GjdUTh5CoFhalLaej9gO1Z/MOBHyXZCGbHqfq7xWexVq1yyBw15H24MRz/m+V kiqierl1NYlxxvWUwtgEZJUHc75WBnDtEasdEgiL+RrlWsewrY2awIDlDmun7ZRtYqlSvxFiudH R1ngLGK74BU3ZTzPXKQ85FZRoOF3WI5i77IXCnFBwzJyVLv9xqklYkipn3PS3PLJOcIhnVs7ZYn R9ZralncYgN9Ud2Z6xA0Ava73nBcOnqpgy+bqxEuOqgkm3/1h7z+gmKKj0oDf6I8jFx+tlmLzQc f60Tu0K2S3XHNPUe/2tJ3foSBQiPzRlrdFGDwNEHQipqsVMg1AAEuBf5okkD+1rs1KoVDLZv5Oe M/dOFDtKdYRNRb+w== X-TMASE-XGENCLOUD: 7c874ead-db80-4f39-b269-9a19b31ed382-0-0-200-0 X-TM-Deliver-Signature: 509002F337D67242CDE88B54126CCC28 X-TM-Addin-Auth: FQ6XPoiTNN9ZjxNErXwyWrGmqUi3bCzO2XF7gHNADvvmbipyPmMYZLD+/W6 uxOdGEP2cyLdAN8ajPHw3MKoz95OwDhqs6poXMvQwc2Aa7jq8bq/Zgp9MN+CERDjSPcLbS42QHs Za2I4hQ9uOCA2NemL4QCFSdO3ST/qofvCv2Zepm43BRB9LdeuOKKNgXkCZrtMRa1Kgzg0lwQFJb BEXGihdLZIrePEW2Jklq0oMvbEt/mxyX2BOTlKkFMPTZuEh+hQb6yBJwHUNTl9qMymtqU9fSviF G39YY1brbS5gyn0=.mkVmxQ+K9MIIIw/41gq+3+PWCwavUg5USdqd6HSdHrFmwRvt6zOSDmvDhc fX9DpmJGDua1BR4ILXkcHi7H0rckw95YDS4Rdc8uGTb5dhajn9CzCKgDpDN0kRcySy0ic6PQms+ sHM+4Wbo90YqjZgPdZafj1z3cQNncILXDUCsjF3iMKGR6zutMgDPO4obgTDKWoVuovWYi6r9v77 jVB05kxynP9IKEhZGwiqQQUIhGYSL2S0B4JP9p8dOsBI+14FVvnF3MCiuJ8aIZUnZ/88wVnF4HM RMm2UdjFm1RNV5Ut5qMgfsy70dxVXoqVoAlGWQz0WhWhY9RPGtouWCD2sog== X-TM-Addin-ProductCode: EMS DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=opensynergy.com; s=TM-DKIM-20210503141657; t=1709130483; bh=wccHaYRRmdaQrFNTjtIYVVqOXBpIk0wQINyYR90rUZw=; l=16816; h=From:To:Date; b=cSzlfyPxPYllTChLg6zDrAdzo5nRMpkF7ipMfRzu1TdPby25aOhfu5OcAAeeYq7v8 K0fcxwGDwJbrBzIfF9TV84yxPLUSQV9YrVtR4enjwZOdbsJJLwX9aAPNLUIfXrh/7E cS+VKplCYIO446W6NZWwUoOnKQHdJBtxel0dgl/PtCrttphl58Ui9o/F5aFu2rn83s ngQH4bj6CGDR2U3n/MaRnmHkm32P7Xq0skHxwnrraxRG18wP1TLeab38a1KeWyKIV9 T7NIuGewdS/xMXikuQqOwwb90e6S4RgSzIeSNZdV9TBHoq1TPrkfAdgo+on5X2kH/u clUKj3dbCm7kA== From: Harald Mommer This is the virtio SPI Linux kernel driver. Signed-off-by: Harald Mommer --- MAINTAINERS | 6 + drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + drivers/spi/spi-virtio.c | 480 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 498 insertions(+) create mode 100644 drivers/spi/spi-virtio.c diff --git a/MAINTAINERS b/MAINTAINERS index 2ecaaec6a6bf..536fad147724 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23391,6 +23391,12 @@ S: Maintained F: include/uapi/linux/virtio_snd.h F: sound/virtio/* +VIRTIO SPI DRIVER +M: Harald Mommer +S: Maintained +F: include/uapi/linux/virtio_spi.h +F: drivers/spi/spi-virtio.c + VIRTUAL BOX GUEST DEVICE DRIVER M: Hans de Goede M: Arnd Bergmann diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ddae0fde798e..ff06e595679a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -1125,6 +1125,17 @@ config SPI_UNIPHIER If your SoC supports SCSSI, say Y here. +config SPI_VIRTIO + tristate "Virtio SPI Controller" + depends on SPI_MASTER && VIRTIO + help + This enables the Virtio SPI driver. + + Virtio SPI is an SPI driver for virtual machines using Virtio. + + If your Linux is a virtual machine using Virtio, say Y here. + If unsure, say N. + config SPI_XCOMM tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver" depends on I2C diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 4ff8d725ba5e..ff2243e44e00 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -146,6 +146,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o +obj-$(CONFIG_SPI_VIRTIO) += spi-virtio.o obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o obj-$(CONFIG_SPI_XLP) += spi-xlp.o diff --git a/drivers/spi/spi-virtio.c b/drivers/spi/spi-virtio.c new file mode 100644 index 000000000000..7e1a75f1b45a --- /dev/null +++ b/drivers/spi/spi-virtio.c @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SPI bus driver for the Virtio SPI controller + * Copyright (C) 2023 OpenSynergy GmbH + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct virtio_spi_req { + struct completion completion; + struct spi_transfer_head transfer_head ____cacheline_aligned; + const uint8_t *tx_buf ____cacheline_aligned; + uint8_t *rx_buf ____cacheline_aligned; + struct spi_transfer_result result ____cacheline_aligned; +}; + +/* virtio_spi private data structure */ +struct virtio_spi_priv { + /* Virtio SPI message */ + struct virtio_spi_req spi_req; + /* The virtio device we're associated with */ + struct virtio_device *vdev; + /* Pointer to the virtqueue */ + struct virtqueue *vq; + /* Copy of config space mode_func_supported */ + u32 mode_func_supported; + /* Copy of config space max_freq_hz */ + u32 max_freq_hz; +}; + +static struct spi_board_info board_info = { + .modalias = "spi-virtio", +}; + +static void virtio_spi_msg_done(struct virtqueue *vq) +{ + struct virtio_spi_req *req; + unsigned int len; + + while ((req = virtqueue_get_buf(vq, &len))) + complete(&req->completion); +} + +/* + * . . . . . . . . . . + * Delay + A + + B + + C + D + E + F + A + + * . . . . . . . . . . + * ___. . . . . . .___.___. . + * CS# |___.______.____.____.___.___| . |___._____________ + * . . . . . . . . . . + * . . . . . . . . . . + * SCLK__.___.___NNN_____NNN__.___.___.___.___.___.___NNN_______ + * + * NOTE: 1st transfer has two words, the delay between these two words are + * 'B' in the diagram. + * + * A => struct spi_device -> cs_setup + * B => max{struct spi_transfer -> word_delay, struct spi_device -> word_delay} + * Note: spi_device and spi_transfer both have word_delay, Linux + * choose the bigger one, refer to _spi_xfer_word_delay_update function + * C => struct spi_transfer -> delay + * D => struct spi_device -> cs_hold + * E => struct spi_device -> cs_inactive + * F => struct spi_transfer -> cs_change_delay + * + * So the corresponding relationship: + * A <===> cs_setup_ns (after CS asserted) + * B <===> word_delay_ns (no matter with CS) + * C+D <===> cs_delay_hold_ns (before CS deasserted) + * E+F <===> cs_change_delay_inactive_ns (after CS deasserted, these two + * values are also recommended in the Linux driver to be added up) + */ +static int virtio_spi_set_delays(struct spi_transfer_head *th, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + int cs_setup; + int cs_word_delay_xfer; + int cs_word_delay_spi; + int delay; + int cs_hold; + int cs_inactive; + int cs_change_delay; + + cs_setup = spi_delay_to_ns(&spi->cs_setup, xfer); + if (cs_setup < 0) { + dev_warn(&spi->dev, "Cannot convert cs_setup\n"); + return cs_setup; + } + th->cs_setup_ns = cpu_to_le32((u32)cs_setup); + + cs_word_delay_xfer = spi_delay_to_ns(&xfer->word_delay, xfer); + if (cs_word_delay_xfer < 0) { + dev_warn(&spi->dev, "Cannot convert cs_word_delay_xfer\n"); + return cs_word_delay_xfer; + } + cs_word_delay_spi = spi_delay_to_ns(&spi->word_delay, xfer); + if (cs_word_delay_spi < 0) { + dev_warn(&spi->dev, "Cannot convert cs_word_delay_spi\n"); + return cs_word_delay_spi; + } + if (cs_word_delay_spi > cs_word_delay_xfer) + th->word_delay_ns = cpu_to_le32((u32)cs_word_delay_spi); + else + th->word_delay_ns = cpu_to_le32((u32)cs_word_delay_xfer); + + delay = spi_delay_to_ns(&xfer->delay, xfer); + if (delay < 0) { + dev_warn(&spi->dev, "Cannot convert delay\n"); + return delay; + } + cs_hold = spi_delay_to_ns(&spi->cs_hold, xfer); + if (cs_hold < 0) { + dev_warn(&spi->dev, "Cannot convert cs_hold\n"); + return cs_hold; + } + th->cs_delay_hold_ns = cpu_to_le32((u32)delay + (u32)cs_hold); + + cs_inactive = spi_delay_to_ns(&spi->cs_inactive, xfer); + if (cs_inactive < 0) { + dev_warn(&spi->dev, "Cannot convert cs_inactive\n"); + return cs_inactive; + } + cs_change_delay = spi_delay_to_ns(&xfer->cs_change_delay, xfer); + if (cs_change_delay < 0) { + dev_warn(&spi->dev, "Cannot convert cs_change_delay\n"); + return cs_change_delay; + } + th->cs_change_delay_inactive_ns = + cpu_to_le32((u32)cs_inactive + (u32)cs_change_delay); + + return 0; +} + +static int virtio_spi_transfer_one(struct spi_controller *ctrl, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct virtio_spi_priv *priv = spi_controller_get_devdata(ctrl); + struct virtio_spi_req *spi_req = &priv->spi_req; + struct spi_transfer_head *th; + struct scatterlist sg_out_head, sg_out_payload; + struct scatterlist sg_in_result, sg_in_payload; + struct scatterlist *sgs[4]; + unsigned int outcnt = 0u; + unsigned int incnt = 0u; + int ret; + + th = &spi_req->transfer_head; + + /* Fill struct spi_transfer_head */ + th->chip_select_id = spi_get_chipselect(spi, 0); + th->bits_per_word = spi->bits_per_word; + th->cs_change = xfer->cs_change; + th->tx_nbits = xfer->tx_nbits; + th->rx_nbits = xfer->rx_nbits; + th->reserved[0] = 0; + th->reserved[1] = 0; + th->reserved[2] = 0; + + BUILD_BUG_ON(VIRTIO_SPI_CPHA != SPI_CPHA); + BUILD_BUG_ON(VIRTIO_SPI_CPOL != SPI_CPOL); + BUILD_BUG_ON(VIRTIO_SPI_CS_HIGH != SPI_CS_HIGH); + BUILD_BUG_ON(VIRTIO_SPI_MODE_LSB_FIRST != SPI_LSB_FIRST); + + th->mode = cpu_to_le32(spi->mode & (SPI_LSB_FIRST | SPI_CS_HIGH | + SPI_CPOL | SPI_CPHA)); + if ((spi->mode & SPI_LOOP) != 0) + th->mode |= cpu_to_le32(VIRTIO_SPI_MODE_LOOP); + + th->freq = cpu_to_le32(xfer->speed_hz); + + ret = virtio_spi_set_delays(th, spi, xfer); + if (ret) + goto msg_done; + + /* Set buffers */ + spi_req->tx_buf = xfer->tx_buf; + spi_req->rx_buf = xfer->rx_buf; + + /* Prepare sending of virtio message */ + reinit_completion(&spi_req->completion); + + sg_init_one(&sg_out_head, th, sizeof(*th)); + sgs[outcnt] = &sg_out_head; + outcnt++; + + if (spi_req->tx_buf) { + sg_init_one(&sg_out_payload, spi_req->tx_buf, xfer->len); + sgs[outcnt] = &sg_out_payload; + outcnt++; + } + + if (spi_req->rx_buf) { + sg_init_one(&sg_in_payload, spi_req->rx_buf, xfer->len); + sgs[outcnt] = &sg_in_payload; + incnt++; + } + + sg_init_one(&sg_in_result, &spi_req->result, + sizeof(struct spi_transfer_result)); + sgs[outcnt + incnt] = &sg_in_result; + incnt++; + + ret = virtqueue_add_sgs(priv->vq, sgs, outcnt, incnt, spi_req, + GFP_KERNEL); + if (ret) + goto msg_done; + + /* Simple implementation: There can be only one transfer in flight */ + virtqueue_kick(priv->vq); + + wait_for_completion(&priv->spi_req.completion); + + /* Read result from message and translate return code */ + switch (priv->spi_req.result.result) { + case VIRTIO_SPI_TRANS_OK: + /* ret is 0 */ + break; + case VIRTIO_SPI_PARAM_ERR: + ret = -EINVAL; + break; + case VIRTIO_SPI_TRANS_ERR: + ret = -EIO; + break; + default: /* Protocol violation */ + ret = -EIO; + break; + } + +msg_done: + if (ret) + ctrl->cur_msg->status = ret; + + return ret; +} + +static void virtio_spi_read_config(struct virtio_device *vdev) +{ + struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev); + struct virtio_spi_priv *priv = vdev->priv; + u8 cs_max_number; + u8 tx_nbits_supported; + u8 rx_nbits_supported; + + cs_max_number = virtio_cread8(vdev, offsetof(struct virtio_spi_config, + cs_max_number)); + ctrl->num_chipselect = cs_max_number; + + /* Set the mode bits which are understood by this driver */ + priv->mode_func_supported = + virtio_cread32(vdev, offsetof(struct virtio_spi_config, + mode_func_supported)); + ctrl->mode_bits = priv->mode_func_supported & + (VIRTIO_SPI_CS_HIGH | VIRTIO_SPI_MODE_LSB_FIRST); + if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPHA_1) != 0) + ctrl->mode_bits |= VIRTIO_SPI_CPHA; + if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPOL_1) != 0) + ctrl->mode_bits |= VIRTIO_SPI_CPOL; + if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LSB_FIRST) != 0) + ctrl->mode_bits |= SPI_LSB_FIRST; + if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LOOPBACK) != 0) + ctrl->mode_bits |= SPI_LOOP; + tx_nbits_supported = + virtio_cread8(vdev, offsetof(struct virtio_spi_config, + tx_nbits_supported)); + if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0) + ctrl->mode_bits |= SPI_TX_DUAL; + if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0) + ctrl->mode_bits |= SPI_TX_QUAD; + if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0) + ctrl->mode_bits |= SPI_TX_OCTAL; + rx_nbits_supported = + virtio_cread8(vdev, offsetof(struct virtio_spi_config, + rx_nbits_supported)); + if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0) + ctrl->mode_bits |= SPI_RX_DUAL; + if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0) + ctrl->mode_bits |= SPI_RX_QUAD; + if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0) + ctrl->mode_bits |= SPI_RX_OCTAL; + + ctrl->bits_per_word_mask = + virtio_cread32(vdev, offsetof(struct virtio_spi_config, + bits_per_word_mask)); + + priv->max_freq_hz = + virtio_cread32(vdev, offsetof(struct virtio_spi_config, + max_freq_hz)); +} + +static int virtio_spi_find_vqs(struct virtio_spi_priv *priv) +{ + struct virtqueue *vq; + + vq = virtio_find_single_vq(priv->vdev, virtio_spi_msg_done, "spi-rq"); + if (IS_ERR(vq)) + return (int)PTR_ERR(vq); + priv->vq = vq; + return 0; +} + +/* Function must not be called before virtio_spi_find_vqs() has been run */ +static void virtio_spi_del_vq(struct virtio_device *vdev) +{ + virtio_reset_device(vdev); + vdev->config->del_vqs(vdev); +} + +static int virtio_spi_validate(struct virtio_device *vdev) +{ + /* + * SPI needs always access to the config space. + * Check that the driver can access the config space + */ + if (!vdev->config->get) { + dev_err(&vdev->dev, "%s failure: config access disabled\n", + __func__); + return -EINVAL; + } + + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) { + dev_err(&vdev->dev, + "device does not comply with spec version 1.x\n"); + return -EINVAL; + } + + return 0; +} + +static int virtio_spi_probe(struct virtio_device *vdev) +{ + struct device_node *np = vdev->dev.parent->of_node; + struct virtio_spi_priv *priv; + struct spi_controller *ctrl; + int err; + u32 bus_num; + u16 csi; + + ctrl = devm_spi_alloc_host(&vdev->dev, sizeof(*priv)); + if (!ctrl) { + dev_err(&vdev->dev, "Kernel memory exhausted in %s()\n", + __func__); + return -ENOMEM; + } + + priv = spi_controller_get_devdata(ctrl); + priv->vdev = vdev; + vdev->priv = priv; + dev_set_drvdata(&vdev->dev, ctrl); + + init_completion(&priv->spi_req.completion); + + err = of_property_read_u32(np, "spi,bus-num", &bus_num); + if (!err && bus_num <= S16_MAX) + ctrl->bus_num = (s16)bus_num; + + virtio_spi_read_config(vdev); + + /* Method to do a single SPI transfer */ + ctrl->transfer_one = virtio_spi_transfer_one; + + /* Initialize virtqueues */ + err = virtio_spi_find_vqs(priv); + if (err) { + dev_err(&vdev->dev, "Cannot setup virtqueues\n"); + return err; + } + + err = spi_register_controller(ctrl); + if (err) { + dev_err(&vdev->dev, "Cannot register controller\n"); + goto err_return; + } + + board_info.max_speed_hz = priv->max_freq_hz; + /* spi_new_device() currently does not use bus_num but better set it */ + board_info.bus_num = (u16)ctrl->bus_num; + + /* Add chip selects to controller */ + for (csi = 0; csi < ctrl->num_chipselect; csi++) { + dev_dbg(&vdev->dev, "Setting up CS=%u\n", csi); + board_info.chip_select = csi; + /* TODO: Discuss setting of board_info.mode */ + if (!(priv->mode_func_supported & VIRTIO_SPI_CS_HIGH)) + board_info.mode = SPI_MODE_0; + else + board_info.mode = SPI_MODE_0 | SPI_CS_HIGH; + if (!spi_new_device(ctrl, &board_info)) { + dev_err(&vdev->dev, "Cannot setup device %u\n", csi); + spi_unregister_controller(ctrl); + err = -ENODEV; + goto err_return; + } + } + + return 0; + +err_return: + vdev->config->del_vqs(vdev); + return err; +} + +static void virtio_spi_remove(struct virtio_device *vdev) +{ + struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev); + + /* Order: 1.) unregister controller, 2.) remove virtqueue */ + spi_unregister_controller(ctrl); + virtio_spi_del_vq(vdev); +} + +static int virtio_spi_freeze(struct virtio_device *vdev) +{ + struct device *dev = &vdev->dev; + struct spi_controller *ctrl = dev_get_drvdata(dev); + int ret; + + /* Stop the queue running */ + ret = spi_controller_suspend(ctrl); + if (ret) { + dev_warn(dev, "cannot suspend controller (%d)\n", ret); + return ret; + } + + virtio_spi_del_vq(vdev); + return 0; +} + +static int virtio_spi_restore(struct virtio_device *vdev) +{ + struct device *dev = &vdev->dev; + struct spi_controller *ctrl = dev_get_drvdata(dev); + int ret; + + ret = virtio_spi_find_vqs(vdev->priv); + if (ret) { + dev_err(dev, "problem starting vqueue (%d)\n", ret); + return ret; + } + + ret = spi_controller_resume(ctrl); + if (ret) + dev_err(dev, "problem resuming controller (%d)\n", ret); + + return ret; +} + +static struct virtio_device_id virtio_spi_id_table[] = { + { VIRTIO_ID_SPI, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_spi_driver = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = virtio_spi_id_table, + .validate = virtio_spi_validate, + .probe = virtio_spi_probe, + .remove = virtio_spi_remove, + .freeze = pm_sleep_ptr(virtio_spi_freeze), + .restore = pm_sleep_ptr(virtio_spi_restore), +}; + +module_virtio_driver(virtio_spi_driver); +MODULE_DEVICE_TABLE(virtio, virtio_spi_id_table); + +MODULE_AUTHOR("OpenSynergy GmbH"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Virtio SPI bus driver");