diff mbox series

[v2,4/4] spi: rzv2m-csi: Make use of device_set_node

Message ID 20230718192453.543549-5-fabrizio.castro.jz@renesas.com
State Accepted
Commit c5a7b66811d22a4901bd358447e59160dbda8f65
Headers show
Series spi: rzv2m-csi: Code refactoring | expand

Commit Message

Fabrizio Castro July 18, 2023, 7:24 p.m. UTC 
Use device_set_node instead of assigning controller->dev.of_node
directly because it also sets the firmware node.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---

v2: Edited the changelog and added include of property.h, according
    to the feedback received from Andy.

 drivers/spi/spi-rzv2m-csi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-rzv2m-csi.c b/drivers/spi/spi-rzv2m-csi.c
index 62575a61608a..d098aefa370d 100644
--- a/drivers/spi/spi-rzv2m-csi.c
+++ b/drivers/spi/spi-rzv2m-csi.c
@@ -12,6 +12,7 @@ 
 #include <linux/iopoll.h>
 #include <linux/log2.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
 #include <linux/units.h>
@@ -589,12 +590,13 @@  static int rzv2m_csi_probe(struct platform_device *pdev)
 	init_waitqueue_head(&csi->wait);
 
 	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
-	controller->dev.of_node = pdev->dev.of_node;
 	controller->bits_per_word_mask = SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
 	controller->setup = rzv2m_csi_setup;
 	controller->transfer_one = rzv2m_csi_transfer_one;
 	controller->use_gpio_descriptors = true;
 
+	device_set_node(&controller->dev, dev_fwnode(dev));
+
 	ret = devm_request_irq(dev, irq, rzv2m_csi_irq_handler, 0,
 			       dev_name(dev), csi);
 	if (ret)