@@ -10,6 +10,7 @@
#include <linux/count_zeros.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
+#include <linux/log2.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/spi/spi.h>
@@ -99,20 +100,6 @@ struct rzv2m_csi_priv {
u32 status;
};
-static const unsigned char x_trg[] = {
- 0, 1, 1, 2, 2, 2, 2, 3,
- 3, 3, 3, 3, 3, 3, 3, 4,
- 4, 4, 4, 4, 4, 4, 4, 4,
- 4, 4, 4, 4, 4, 4, 4, 5
-};
-
-static const unsigned char x_trg_words[] = {
- 1, 2, 2, 4, 4, 4, 4, 8,
- 8, 8, 8, 8, 8, 8, 8, 16,
- 16, 16, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 16, 16, 16, 16, 32
-};
-
static void rzv2m_csi_reg_write_bit(const struct rzv2m_csi_priv *csi,
int reg_offs, int bit_mask, u32 value)
{
@@ -216,7 +203,7 @@ static inline void rzv2m_csi_calc_current_transfer(struct rzv2m_csi_priv *csi)
* less than or equal to the number of bytes we need to transfer.
* This may result in multiple smaller transfers.
*/
- csi->words_to_transfer = x_trg_words[to_transfer - 1];
+ csi->words_to_transfer = rounddown_pow_of_two(to_transfer);
if (csi->bytes_per_word == 2)
csi->bytes_to_transfer = csi->words_to_transfer << 1;
@@ -227,7 +214,7 @@ static inline void rzv2m_csi_calc_current_transfer(struct rzv2m_csi_priv *csi)
static inline void rzv2m_csi_set_rx_fifo_trigger_level(struct rzv2m_csi_priv *csi)
{
rzv2m_csi_reg_write_bit(csi, CSI_FIFOTRG, CSI_FIFOTRG_R_TRG,
- x_trg[csi->words_to_transfer - 1]);
+ ilog2(csi->words_to_transfer));
}
static inline void rzv2m_csi_enable_rx_trigger(struct rzv2m_csi_priv *csi,
@@ -300,7 +287,6 @@ static int rzv2m_csi_wait_for_tx_empty(struct rzv2m_csi_priv *csi)
return 0;
ret = rzv2m_csi_wait_for_interrupt(csi, CSI_INT_TREND, CSI_CNT_TREND_E);
-
if (ret == -ETIMEDOUT)
csi->errors |= TX_TIMEOUT_ERROR;
@@ -316,7 +302,6 @@ static inline int rzv2m_csi_wait_for_rx_ready(struct rzv2m_csi_priv *csi)
ret = rzv2m_csi_wait_for_interrupt(csi, CSI_INT_R_TRGR,
CSI_CNT_R_TRGR_E);
-
if (ret == -ETIMEDOUT)
csi->errors |= RX_TIMEOUT_ERROR;
Table x_trg can be replaced with ilog2(), and table x_trg_words can be replaced with rounddown_pow_of_two(). Replace the tables usage with the corresponding macros. While at it, remove a couple of unnecessary empty lines. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> --- drivers/spi/spi-rzv2m-csi.c | 21 +++------------------ 1 file changed, 3 insertions(+), 18 deletions(-)