diff mbox series

[2/5] dt-bindings: serial: geni-qcom: Allow no qup-core icc path

Message ID 20230703-topic-8250_qup_icc-v1-2-fea39aa07525@linaro.org
State New
Headers show
Series Add interconnects to QUPs on SM8250 | expand

Commit Message

Konrad Dybcio July 3, 2023, 1:31 p.m. UTC
Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
Allow such case.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../bindings/serial/qcom,serial-geni-qcom.yaml     | 26 +++++++++++++++-------
 1 file changed, 18 insertions(+), 8 deletions(-)

Comments

Krzysztof Kozlowski July 3, 2023, 2:01 p.m. UTC | #1
On 03/07/2023 15:31, Konrad Dybcio wrote:
> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
> Allow such case.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  .../bindings/serial/qcom,serial-geni-qcom.yaml     | 26 +++++++++++++++-------
>  1 file changed, 18 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
> index dd33794b3534..a0acba57bc06 100644
> --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
> @@ -25,14 +25,6 @@ properties:
>    clock-names:
>      const: se
>  
> -  interconnects:
> -    maxItems: 2
> -
> -  interconnect-names:
> -    items:
> -      - const: qup-core
> -      - const: qup-config

Instead please keep the definition of the fields in top-level properties
with the widest constraints, e.g.
interconnects:
  minItems: 1
  maxItems: 2

interconnect-names:
  minItems: 1
  items:
   - const: qup-core
   - const: qup-config

If there was allOf:if:then per variant, this could be further customized.

Best regards,
Krzysztof
Konrad Dybcio July 3, 2023, 2:38 p.m. UTC | #2
On 3.07.2023 16:01, Krzysztof Kozlowski wrote:
> On 03/07/2023 15:31, Konrad Dybcio wrote:
>> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
>> Allow such case.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>>  .../bindings/serial/qcom,serial-geni-qcom.yaml     | 26 +++++++++++++++-------
>>  1 file changed, 18 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
>> index dd33794b3534..a0acba57bc06 100644
>> --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
>> +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
>> @@ -25,14 +25,6 @@ properties:
>>    clock-names:
>>      const: se
>>  
>> -  interconnects:
>> -    maxItems: 2
>> -
>> -  interconnect-names:
>> -    items:
>> -      - const: qup-core
>> -      - const: qup-config
> 
> Instead please keep the definition of the fields in top-level properties
> with the widest constraints, e.g.
> interconnects:
>   minItems: 1
>   maxItems: 2
> 
> interconnect-names:
>   minItems: 1
>   items:
>    - const: qup-core
>    - const: qup-config
Sadly the issue here is that the qup-config path exists, but qup-core
doesn't.

Konrad
> 
> If there was allOf:if:then per variant, this could be further customized.
> 
> Best regards,
> Krzysztof
>
Rob Herring (Arm) July 3, 2023, 2:50 p.m. UTC | #3
On Mon, 03 Jul 2023 15:31:11 +0200, Konrad Dybcio wrote:
> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path.
> Allow such case.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  .../bindings/serial/qcom,serial-geni-qcom.yaml     | 26 +++++++++++++++-------
>  1 file changed, 18 insertions(+), 8 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@8c0000: serial@a88000: More than one condition true in oneOf schema:
	{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
	 '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
	 '$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
	 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
	           {'oneOf': [{'required': ['interrupts']},
	                      {'required': ['interrupts-extended']}]}],
	 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-config'}],
	                                                  'maxItems': 1,
	                                                  'minItems': 1,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 1,
	                                             'minItems': 1},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}},
	           {'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-core'},
	                                                            {'const': 'qup-config'}],
	                                                  'maxItems': 2,
	                                                  'minItems': 2,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 2,
	                                             'minItems': 2},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}}],
	 'properties': {'$nodename': True,
	                'assigned-clock-parents': True,
	                'assigned-clock-rates': True,
	                'assigned-clocks': True,
	                'bootph-all': True,
	                'bootph-pre-ram': True,
	                'bootph-pre-sram': True,
	                'bootph-some-ram': True,
	                'bootph-verify': True,
	                'clock-names': {'items': [{'const': 'se'}],
	                                'maxItems': 1,
	                                'minItems': 1,
	                                'type': 'array'},
	                'clocks': {'maxItems': 1, 'minItems': 1},
	                'compatible': {'items': [{'enum': ['qcom,geni-uart',
	                                                   'qcom,geni-debug-uart']}],
	                               'maxItems': 1,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupt-parent': True,
	                'interrupts': {'maxItems': 2,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupts-extended': {'maxItems': 2,
	                                        'minItems': 1,
	                                        'type': 'array'},
	                'operating-points-v2': True,
	                'phandle': True,
	                'pinctrl-0': True,
	                'pinctrl-1': True,
	                'pinctrl-names': {'items': [{'const': 'default'},
	                                            {'const': 'sleep'}],
	                                  'maxItems': 2,
	                                  'minItems': 1,
	                                  'type': 'array'},
	                'power-domains': {'maxItems': 1, 'minItems': 1},
	                'reg': {'maxItems': 1, 'minItems': 1},
	                'secure-status': True,
	                'status': True},
	 'required': ['compatible', 'clocks', 'clock-names', 'reg'],
	 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
	                                                                'qcom,geni-uart']}}},
	            'required': ['compatible']},
	 'title': 'Qualcomm Geni based QUP UART interface',
	 'type': 'object',
	 'unevaluatedProperties': False}
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: serial@a88000: More than one condition true in oneOf schema:
	{'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml',
	 '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#',
	 '$schema': 'http://devicetree.org/meta-schemas/core.yaml#',
	 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'},
	           {'oneOf': [{'required': ['interrupts']},
	                      {'required': ['interrupts-extended']}]}],
	 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-config'}],
	                                                  'maxItems': 1,
	                                                  'minItems': 1,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 1,
	                                             'minItems': 1},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}},
	           {'patternProperties': {'pinctrl-[0-9]+': True},
	            'properties': {'$nodename': True,
	                           'bootph-all': True,
	                           'bootph-pre-ram': True,
	                           'bootph-pre-sram': True,
	                           'bootph-some-ram': True,
	                           'bootph-verify': True,
	                           'interconnect-names': {'items': [{'const': 'qup-core'},
	                                                            {'const': 'qup-config'}],
	                                                  'maxItems': 2,
	                                                  'minItems': 2,
	                                                  'type': 'array'},
	                           'interconnects': {'maxItems': 2,
	                                             'minItems': 2},
	                           'phandle': True,
	                           'pinctrl-names': True,
	                           'secure-status': True,
	                           'status': True}}],
	 'properties': {'$nodename': True,
	                'assigned-clock-parents': True,
	                'assigned-clock-rates': True,
	                'assigned-clocks': True,
	                'bootph-all': True,
	                'bootph-pre-ram': True,
	                'bootph-pre-sram': True,
	                'bootph-some-ram': True,
	                'bootph-verify': True,
	                'clock-names': {'items': [{'const': 'se'}],
	                                'maxItems': 1,
	                                'minItems': 1,
	                                'type': 'array'},
	                'clocks': {'maxItems': 1, 'minItems': 1},
	                'compatible': {'items': [{'enum': ['qcom,geni-uart',
	                                                   'qcom,geni-debug-uart']}],
	                               'maxItems': 1,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupt-parent': True,
	                'interrupts': {'maxItems': 2,
	                               'minItems': 1,
	                               'type': 'array'},
	                'interrupts-extended': {'maxItems': 2,
	                                        'minItems': 1,
	                                        'type': 'array'},
	                'operating-points-v2': True,
	                'phandle': True,
	                'pinctrl-0': True,
	                'pinctrl-1': True,
	                'pinctrl-names': {'items': [{'const': 'default'},
	                                            {'const': 'sleep'}],
	                                  'maxItems': 2,
	                                  'minItems': 1,
	                                  'type': 'array'},
	                'power-domains': {'maxItems': 1, 'minItems': 1},
	                'reg': {'maxItems': 1, 'minItems': 1},
	                'secure-status': True,
	                'status': True},
	 'required': ['compatible', 'clocks', 'clock-names', 'reg'],
	 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart',
	                                                                'qcom,geni-uart']}}},
	            'required': ['compatible']},
	 'title': 'Qualcomm Geni based QUP UART interface',
	 'type': 'object',
	 'unevaluatedProperties': False}
	from schema $id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-2-fea39aa07525@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
index dd33794b3534..a0acba57bc06 100644
--- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -25,14 +25,6 @@  properties:
   clock-names:
     const: se
 
-  interconnects:
-    maxItems: 2
-
-  interconnect-names:
-    items:
-      - const: qup-core
-      - const: qup-config
-
   interrupts:
     minItems: 1
     items:
@@ -56,6 +48,24 @@  properties:
   reg:
     maxItems: 1
 
+oneOf:
+  - properties:
+      interconnects:
+        maxItems: 1
+
+      interconnect-names:
+        items:
+          - const: qup-config
+
+  - properties:
+      interconnects:
+        minItems: 2
+
+      interconnect-names:
+        items:
+          - const: qup-core
+          - const: qup-config
+
 required:
   - compatible
   - clocks