diff mbox series

[01/14] dt-bindings: display: convert ilitek,ili9341.txt to dt-schema

Message ID 20220618123035.563070-2-mail@conchuod.ie
State Superseded
Headers show
Series Canaan devicetree fixes | expand

Commit Message

Conor Dooley June 18, 2022, 12:30 p.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

A dt-schema binding for the Ilitek ili9341 was created as
panel/ilitek,ili9341.yaml but the txt binding was ignored in the
process. Move the remaining items in the txt binding to the yaml one &
delete it.

The example in the txt binding has a spi-max-frequency which disagrees
with the yaml replacement (and its own documentation) so change that to
conform with the binding. There are no users in tree of the Adafruit
yx240qv29 to check against.

Link: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../bindings/display/ilitek,ili9341.txt       | 27 -----------
 .../display/panel/ilitek,ili9341.yaml         | 48 +++++++++++++------
 2 files changed, 34 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@ 
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 6058948a9764..94ca92878434 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -23,6 +23,7 @@  properties:
       - enum:
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - adafruit,yx240qv29
       - const: ilitek,ili9341
 
   reg: true
@@ -47,31 +48,50 @@  properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
         };
+    };
 ...