@@ -1734,12 +1734,13 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
bool is_serial_bus_slave = false;
static const struct acpi_device_id ignore_serial_bus_ids[] = {
/*
- * These devices have multiple I2cSerialBus resources and an i2c-client
- * must be instantiated for each, each with its own i2c_device_id.
- * Normally we only instantiate an i2c-client for the first resource,
- * using the ACPI HID as id. These special cases are handled by the
- * drivers/platform/x86/serial-multi-instantiate.c driver, which knows
- * which i2c_device_id to use for each resource.
+ * These devices have multiple I2cSerialBus/SpiSerialBus resources
+ * and an (i2c/spi)-client must be instantiated for each, each with
+ * its own i2c_device_id/spi_device_id.
+ * Normally we only instantiate an (i2c/spi)-client for the first
+ * resource, using the ACPI HID as id. These special cases are handled
+ * by the drivers/platform/x86/serial-multi-instantiate.c driver, which
+ * knows which i2c_device_id or spi_device_id to use for each resource.
*/
{"BSG1160", },
{"BSG2150", },
@@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
If you have a Topstar laptop, say Y or M here.
config SERIAL_MULTI_INSTANTIATE
- tristate "I2C multi instantiate pseudo device driver"
- depends on I2C && ACPI
+ tristate "I2C and SPI multi instantiate pseudo device driver"
+ depends on I2C && SPI && ACPI
help
- Some ACPI-based systems list multiple i2c-devices in a single ACPI
- firmware-node. This driver will instantiate separate i2c-clients
- for each device in the firmware-node.
+ Some ACPI-based systems list multiple i2c/spi devices in a
+ single ACPI firmware-node. This driver will instantiate separate
+ i2c-clients or spi-devices for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
will be called serial-multi-instantiate.
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Serial multi-instantiate driver, pseudo driver to instantiate multiple
- * i2c-clients from a single fwnode.
+ * i2c-clients or spi-devices from a single fwnode.
*
* Copyright 2018 Hans de Goede <hdegoede@redhat.com>
*/
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/spi/spi.h>
#include <linux/types.h>
#define IRQ_RESOURCE_TYPE GENMASK(1, 0)
@@ -21,15 +22,28 @@
#define IRQ_RESOURCE_GPIO 1
#define IRQ_RESOURCE_APIC 2
+enum smi_bus_type {
+ SMI_I2C,
+ SMI_SPI,
+ SMI_AUTO_DETECT,
+};
+
struct smi_instance {
const char *type;
unsigned int flags;
int irq_idx;
};
+struct smi_node {
+ enum smi_bus_type bus_type;
+ struct smi_instance instances[];
+};
+
struct smi {
int i2c_num;
+ int spi_num;
struct i2c_client **i2c_devs;
+ struct spi_device **spi_devs;
};
static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
@@ -60,6 +74,93 @@ static void smi_devs_unregister(struct smi *smi)
{
while (smi->i2c_num > 0)
i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
+
+ while (smi->spi_num > 0)
+ spi_unregister_device(smi->spi_devs[--smi->spi_num]);
+}
+
+/**
+ * smi_spi_probe - Instantiate multiple SPI devices from inst array
+ * @pdev: Platform device
+ * @adev: ACPI device
+ * @smi: Internal struct for Serial multi instantiate driver
+ * @inst: Array of instances to probe
+ *
+ * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
+ */
+static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+ const struct smi_instance *inst_array)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_controller *ctlr;
+ struct spi_device *spi_dev;
+ char name[50];
+ int i, ret, count;
+
+ ret = acpi_spi_count_resources(adev);
+ if (ret <= 0)
+ return ret == 0 ? -ENODEV : ret;
+
+ count = ret;
+
+ smi->spi_devs = devm_kcalloc(dev, count, sizeof(*smi->spi_devs), GFP_KERNEL);
+ if (!smi->spi_devs)
+ return -ENOMEM;
+
+ for (i = 0; i < count && inst_array[i].type; i++) {
+
+ spi_dev = acpi_spi_device_alloc(NULL, adev, i);
+ if (IS_ERR(spi_dev)) {
+ ret = PTR_ERR(spi_dev);
+ dev_err_probe(dev, ret, "failed to allocate SPI device %s from ACPI: %d\n",
+ dev_name(&adev->dev), ret);
+ goto error;
+ }
+
+ ctlr = spi_dev->controller;
+
+ strscpy(spi_dev->modalias, inst_array[i].type, sizeof(spi_dev->modalias));
+
+ ret = smi_get_irq(pdev, adev, &inst_array[i]);
+ if (ret < 0) {
+ spi_dev_put(spi_dev);
+ goto error;
+ }
+ spi_dev->irq = ret;
+
+ snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev),
+ inst_array[i].type, i);
+ spi_dev->dev.init_name = name;
+
+ ret = spi_add_device(spi_dev);
+ if (ret) {
+ dev_err_probe(&ctlr->dev, ret,
+ "failed to add SPI device %s from ACPI: %d\n",
+ dev_name(&adev->dev), ret);
+ spi_dev_put(spi_dev);
+ goto error;
+ }
+
+ dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select);
+
+ smi->spi_devs[i] = spi_dev;
+ smi->spi_num++;
+ }
+
+ if (smi->spi_num < count) {
+ dev_err(dev, "Error finding driver, idx %d\n", i);
+ ret = -ENODEV;
+ goto error;
+ }
+
+ dev_info(dev, "Instantiated %d SPI devices.\n", smi->spi_num);
+
+ return 0;
+error:
+ smi_devs_unregister(smi);
+
+ return ret;
+
}
/**
@@ -125,13 +226,13 @@ static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev,
static int smi_probe(struct platform_device *pdev)
{
- const struct smi_instance *inst_array;
struct device *dev = &pdev->dev;
+ const struct smi_node *node;
struct acpi_device *adev;
struct smi *smi;
- inst_array = device_get_match_data(dev);
- if (!inst_array) {
+ node = device_get_match_data(dev);
+ if (!node) {
dev_err(dev, "Error ACPI match data is missing\n");
return -ENODEV;
}
@@ -146,7 +247,21 @@ static int smi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, smi);
- return smi_i2c_probe(pdev, adev, smi, inst_array);
+ switch (node->bus_type) {
+ case SMI_I2C:
+ return smi_i2c_probe(pdev, adev, smi, node->instances);
+ case SMI_SPI:
+ return smi_spi_probe(pdev, adev, smi, node->instances);
+ case SMI_AUTO_DETECT:
+ if (i2c_acpi_client_count(adev) > 0)
+ return smi_i2c_probe(pdev, adev, smi, node->instances);
+ else
+ return smi_spi_probe(pdev, adev, smi, node->instances);
+ default:
+ break;
+ }
+
+ return 0; /* never reached */
}
static int smi_remove(struct platform_device *pdev)
@@ -158,27 +273,36 @@ static int smi_remove(struct platform_device *pdev)
return 0;
}
-static const struct smi_instance bsg1160_data[] = {
- { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
- { "bmc150_magn" },
- { "bmg160" },
- {}
+static const struct smi_node bsg1160_data = {
+ .instances = {
+ { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+ { "bmc150_magn" },
+ { "bmg160" },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
-static const struct smi_instance bsg2150_data[] = {
- { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
- { "bmc150_magn" },
- /* The resources describe a 3th client, but it is not really there. */
- { "bsg2150_dummy_dev" },
- {}
+static const struct smi_node bsg2150_data = {
+ .instances = {
+ { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+ { "bmc150_magn" },
+ /* The resources describe a 3th client, but it is not really there. */
+ { "bsg2150_dummy_dev" },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
-static const struct smi_instance int3515_data[] = {
- { "tps6598x", IRQ_RESOURCE_APIC, 0 },
- { "tps6598x", IRQ_RESOURCE_APIC, 1 },
- { "tps6598x", IRQ_RESOURCE_APIC, 2 },
- { "tps6598x", IRQ_RESOURCE_APIC, 3 },
- {}
+static const struct smi_node int3515_data = {
+ .instances = {
+ { "tps6598x", IRQ_RESOURCE_APIC, 0 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 1 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 2 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 3 },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
/*
@@ -186,9 +310,9 @@ static const struct smi_instance int3515_data[] = {
* drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
*/
static const struct acpi_device_id smi_acpi_ids[] = {
- { "BSG1160", (unsigned long)bsg1160_data },
- { "BSG2150", (unsigned long)bsg2150_data },
- { "INT3515", (unsigned long)int3515_data },
+ { "BSG1160", (unsigned long)&bsg1160_data },
+ { "BSG2150", (unsigned long)&bsg2150_data },
+ { "INT3515", (unsigned long)&int3515_data },
{ }
};
MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
Add support for spi bus in serial-multi-instantiate driver Some peripherals can have either a I2C or a SPI connection to the host (but not both) but use the same HID for both types. So it is not possible to use the HID to determine whether it is I2C or SPI. The driver must check the node to see if it contains I2cSerialBus or SpiSerialBus entries. For backwards-compatibility with the existing nodes I2C is checked first and if such entries are found ONLY I2C devices are created. Since some existing nodes that were already handled by this driver could also contain unrelated SpiSerialBus nodes that were previously ignored, and this preserves that behavior. If there is ever a need to handle a node where both I2C and SPI devices must be instantiated this can be added in future. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> --- drivers/acpi/scan.c | 13 +- drivers/platform/x86/Kconfig | 10 +- .../platform/x86/serial-multi-instantiate.c | 174 +++++++++++++++--- 3 files changed, 161 insertions(+), 36 deletions(-)