@@ -146,6 +146,15 @@ static int dw_spi_dw_apb_init(struct platform_device *pdev,
return 0;
}
+static int dw_spi_dwc_ssi_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ /* Register hook to configure CTRLR0 */
+ dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
+
+ return 0;
+}
+
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
@@ -244,6 +253,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init},
+ { .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_dwc_ssi_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
@@ -318,6 +318,47 @@ u32 dw_spi_update_cr0(struct spi_controller *master, struct spi_device *spi,
}
EXPORT_SYMBOL_GPL(dw_spi_update_cr0);
+/* Configure CTRLR0 for DWC_ssi */
+u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
+ struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct dw_spi *dws = spi_controller_get_devdata(master);
+ struct chip_data *chip = spi_get_ctldata(spi);
+ u32 cr0;
+
+ /* CTRLR0[ 4: 0] Data Frame Size */
+ cr0 = (transfer->bits_per_word - 1);
+
+ /* CTRLR0[ 7: 6] Frame Format */
+ cr0 |= chip->type << DWC_SSI_CTRLR0_FRF_OFFSET;
+
+ /*
+ * SPI mode (SCPOL|SCPH)
+ * CTRLR0[ 8] Serial Clock Phase
+ * CTRLR0[ 9] Serial Clock Polarity
+ */
+ cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DWC_SSI_CTRLR0_SCPOL_OFFSET;
+ cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DWC_SSI_CTRLR0_SCPH_OFFSET;
+
+ /* CTRLR0[11:10] Transfer Mode */
+ cr0 |= chip->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET;
+
+ /* CTRLR0[13] Shift Register Loop */
+ cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DWC_SSI_CTRLR0_SRL_OFFSET;
+
+ /* Adjust Transfer Mode if necessary */
+ if (chip->cs_control) {
+ chip->tmode = dw_spi_update_tmode(dws);
+
+ cr0 &= ~DWC_SSI_CTRLR0_TMOD_MASK;
+ cr0 |= chip->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET;
+ }
+
+ return cr0;
+}
+EXPORT_SYMBOL_GPL(dw_spi_update_cr0_v1_01a);
+
static int dw_spi_transfer_one(struct spi_controller *master,
struct spi_device *spi, struct spi_transfer *transfer)
{
@@ -57,6 +57,15 @@
#define SPI_SRL_OFFSET 11
#define SPI_CFS_OFFSET 12
+/* Bit fields in CTRLR0 based on DWC_ssi_databook.pdf v1.01a */
+#define DWC_SSI_CTRLR0_SRL_OFFSET 13
+#define DWC_SSI_CTRLR0_TMOD_OFFSET 10
+#define DWC_SSI_CTRLR0_TMOD_MASK GENMASK(11, 10)
+#define DWC_SSI_CTRLR0_SCPOL_OFFSET 9
+#define DWC_SSI_CTRLR0_SCPH_OFFSET 8
+#define DWC_SSI_CTRLR0_FRF_OFFSET 6
+#define DWC_SSI_CTRLR0_DFS_OFFSET 0
+
/* Bit fields in SR, 7 bits */
#define SR_MASK 0x7f /* cover 7 bits */
#define SR_BUSY (1 << 0)
@@ -257,6 +266,9 @@ extern int dw_spi_resume_host(struct dw_spi *dws);
extern u32 dw_spi_update_cr0(struct spi_controller *master,
struct spi_device *spi,
struct spi_transfer *transfer);
+extern u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
+ struct spi_device *spi,
+ struct spi_transfer *transfer);
/* platform related setup */
extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
This patch adds initial support for DesignWare DWC_ssi soft IP. DWC_ssi is the enhanced version of DW_apb_ssi, which is currently supported by this driver. Their registers are same, but the bit fields of register CTRLR0 are different. DWC_ssi has additional features compared to DW_apb_ssi. Major enhancements in DWC_ssi are hyper bus protocol, boot mode support and advanced XIP support. DWC_ssi is an AHB slave device, whilst DW_apb_ssi is an APB slave device. Register offset DW_ssi DW_apb_ssi CTRLR0 0x00 0x00 CTRLR1 0x04 0x04 SSIENR 0x08 0x08 MWCR 0x0c 0x0c SER 0x10 0x10 BAUDR 0x14 0x14 TXFTLR 0x18 0x18 RXFTLR 0x1c 0x1c TXFLR 0x20 0x20 RXFLR 0x24 0x24 SR 0x28 0x28 IMR 0x2c 0x2c ISR 0x30 0x30 RISR 0x34 0x34 TXOICR 0x38 0x38 RXOICR 0x3c 0x3c RXUICR 0x40 0x40 MSTICR 0x44 0x44 ICR 0x48 0x48 DMACR 0x4c 0x4c DMATDLR 0x50 0x50 DMARDLR 0x54 0x54 IDR 0x58 0x58 SSI_VERSION_ID 0x5c 0x5c DRx (0 to 35) 0x60+i*0x4 0x60+i*0x4 RX_SAMPLE_DLY 0xf0 0xf0 SPI_CTRLR0 0xf4 0xf4 TXD_DRIVE_EDGE 0xf8 0xf8 XIP_MODE_BITS 0xfc RSVD Register configuration - CTRLR0 DW_ssi DW_apb_ssi SPI_HYPERBUS_EN bit[24] NONE SPI_FRF bit[23:22] bit[22:21] DFS_32 NONE bit[20:16] CFS bit[19:16] bit[15:12] SSTE bit[14] bit[24] SRL bit[13] bit[11] SLV_OE bit[12] bit[10] TMOD bit[11:10] bit[9:8] SCPOL | SPHA bit[9:8] bit[7:6] FRF bit[7:6] bit[5:4] DFS bit[4:0] bit[3:0] The documents used are [1] DW_apb_ssi_databook.pdf version 4.01a (2016.10a). [2] DWC_ssi_databook.pdf version 1.01a. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/spi/spi-dw-mmio.c | 10 ++++++++++ drivers/spi/spi-dw.c | 41 +++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-dw.h | 12 ++++++++++++ 3 files changed, 63 insertions(+)