diff mbox series

[v2,1/7] spi: stm32: fixes pm_runtime calls in probe/remove

Message ID 1625646426-5826-2-git-send-email-alain.volmat@foss.st.com
State New
Headers show
Series spi: stm32: various fixes & cleanup | expand

Commit Message

Alain Volmat July 7, 2021, 8:27 a.m. UTC 
Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 drivers/spi/spi-stm32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8ffcffbb8157..a92a28933edb 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1925,6 +1925,7 @@  static int stm32_spi_probe(struct platform_device *pdev)
 		master->can_dma = stm32_spi_can_dma;
 
 	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = spi_register_master(master);
@@ -1940,6 +1941,8 @@  static int stm32_spi_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 err_dma_release:
 	if (spi->dma_tx)
 		dma_release_channel(spi->dma_tx);
@@ -1956,9 +1959,14 @@  static int stm32_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	spi_unregister_master(master);
 	spi->cfg->disable(spi);
 
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	if (master->dma_tx)
 		dma_release_channel(master->dma_tx);
 	if (master->dma_rx)
@@ -1966,7 +1974,6 @@  static int stm32_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(spi->clk);
 
-	pm_runtime_disable(&pdev->dev);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);