mbox series

[v4,0/3] mtd: spi-nor / spi / MFD: Convert intel-spi to SPI MEM

Message ID 20211118130543.11179-1-mika.westerberg@linux.intel.com
Headers show
Series mtd: spi-nor / spi / MFD: Convert intel-spi to SPI MEM | expand

Message

Mika Westerberg Nov. 18, 2021, 1:05 p.m. UTC
Hi all,

Based on discussion on the patch I sent some time ago here:

  http://lists.infradead.org/pipermail/linux-mtd/2021-June/086867.html

it turns out that the preferred way to deal with the SPI flash controller
drivers is through SPI MEM which is part of Linux SPI subsystem.

This series does that for the intel-spi driver. This also renames the
driver to follow the convention used in the SPI subsystem. The first patch
improves the write protection handling to be slightly more safer. The
following two patches do the conversion itself. Note the Intel SPI flash
controller only allows commands such as read, write and so on and it
internally uses whatever addressing etc. it figured from the SFDP on the
flash device.

Previous versions of the patch series can be found here:

  v3: https://lore.kernel.org/linux-mtd/20211013114432.31352-1-mika.westerberg@linux.intel.com/
  v2: https://lore.kernel.org/linux-mtd/20211007112132.30934-1-mika.westerberg@linux.intel.com/
  v1: https://lore.kernel.org/linux-mtd/20210930100719.2176-1-mika.westerberg@linux.intel.com/

Changes from v3:

  * Create an array of supported opcodes and reject everything else.
  * Fix checkpatch warnings reported by Mauro
  * Added tags from Lee and Mauro

Changes from v2:

  * Added tag from Andy
  * Check buswidth in intel_spi_supports_mem_op() and return false if octal
    mode is asked. The Intel controllers support buswidths 1-4 but this is
    not exposed to software. It figures this itself through SFDP tables.
  * In case of software sequencer, support same opcodes than we support with
    the hardware sequencer if found in the opcodes table.

Changes from v1:

  * Arrange dependencies in Kconfig entries the same way in both glue
    drivers.
  * Added empty lines between different subsystem includes.
  * dev_err() to single line
  * Return intel_spi_sw_cycle() directly in intel_spi_erase().
  * Drop redundant elses.
  * Fixed typo in the commit message of the patch 3/3.

Mika Westerberg (3):
  mtd: spi-nor: intel-spi: Disable write protection only if asked
  mtd: spi-nor: intel-spi: Convert to SPI MEM
  Documentation / MTD: Rename the intel-spi driver

 Documentation/driver-api/mtd/index.rst        |   2 +-
 .../mtd/{intel-spi.rst => spi-intel.rst}      |   8 +-
 drivers/mfd/lpc_ich.c                         |  59 +-
 drivers/mtd/spi-nor/controllers/Kconfig       |  36 -
 drivers/mtd/spi-nor/controllers/Makefile      |   3 -
 drivers/mtd/spi-nor/controllers/intel-spi.h   |  21 -
 drivers/spi/Kconfig                           |  39 +
 drivers/spi/Makefile                          |   3 +
 .../intel-spi-pci.c => spi/spi-intel-pci.c}   |  49 +-
 .../spi-intel-platform.c}                     |  21 +-
 .../intel-spi.c => spi/spi-intel.c}           | 829 ++++++++++++------
 drivers/spi/spi-intel.h                       |  19 +
 include/linux/mfd/lpc_ich.h                   |   2 +-
 .../x86/{intel-spi.h => spi-intel.h}          |  12 +-
 14 files changed, 701 insertions(+), 402 deletions(-)
 rename Documentation/driver-api/mtd/{intel-spi.rst => spi-intel.rst} (94%)
 delete mode 100644 drivers/mtd/spi-nor/controllers/intel-spi.h
 rename drivers/{mtd/spi-nor/controllers/intel-spi-pci.c => spi/spi-intel-pci.c} (84%)
 rename drivers/{mtd/spi-nor/controllers/intel-spi-platform.c => spi/spi-intel-platform.c} (65%)
 rename drivers/{mtd/spi-nor/controllers/intel-spi.c => spi/spi-intel.c} (57%)
 create mode 100644 drivers/spi/spi-intel.h
 rename include/linux/platform_data/x86/{intel-spi.h => spi-intel.h} (64%)

Comments

Mika Westerberg Dec. 16, 2021, 10:39 a.m. UTC | #1
Hi,

On Thu, Nov 18, 2021 at 04:05:40PM +0300, Mika Westerberg wrote:
> Hi all,
> 
> Based on discussion on the patch I sent some time ago here:
> 
>   http://lists.infradead.org/pipermail/linux-mtd/2021-June/086867.html
> 
> it turns out that the preferred way to deal with the SPI flash controller
> drivers is through SPI MEM which is part of Linux SPI subsystem.
> 
> This series does that for the intel-spi driver. This also renames the
> driver to follow the convention used in the SPI subsystem. The first patch
> improves the write protection handling to be slightly more safer. The
> following two patches do the conversion itself. Note the Intel SPI flash
> controller only allows commands such as read, write and so on and it
> internally uses whatever addressing etc. it figured from the SFDP on the
> flash device.

Any comments on this series? If no, I would appreciate if these could be
merged for v5.17 :)

Thanks!