@@ -82,6 +82,16 @@ struct sm501_devdata {
unsigned int rev;
};
+struct sm501_config_props_uint {
+ char *name;
+ u32 shift;
+};
+
+struct sm501_config_props_flag {
+ char *clr_name;
+ char *set_name;
+ u32 bit;
+};
#define MHZ (1000 * 1000)
@@ -1370,6 +1380,305 @@ static int sm501_init_dev(struct sm501_devdata *sm)
return 0;
}
+static const struct sm501_config_props_uint misc_timing[] = {
+ {"delay", 0},
+ {"-", 3},
+ {"divider", 4},
+ {"-", 6},
+ {"sm0", 8},
+ {"-", 12},
+ {"sm1", 16},
+ {"-", 20},
+ {"xc", 24},
+ {"-", 26},
+ {"ex", 28},
+ {NULL, 32},
+};
+
+static const struct sm501_config_props_flag misc_timing_flag[] = {
+ {"usb-host-normal", "usb-host-simulation", 3},
+ {"no-acpi-control", "acpi-control", 6},
+ {"pll-debug-input", "pll-debug-output", 7},
+ {"sdram-clock-mode0-288mhz", "sdram-clock-mode0-div", 12},
+ {"sdram-clock-mode1-288mhz", "sdram-clock-mode1-div", 20},
+ {"usb-over-current-detect-disable",
+ "usb-over-current-detect-enable", 23},
+ {},
+};
+
+static const struct sm501_config_props_uint misc_control[] = {
+ {"hold", 18},
+ {"refresh", 21},
+ {"-", 23},
+ {"usbclk", 28},
+ {"pad", 30},
+ {NULL, 32},
+};
+
+static const struct sm501_config_props_flag misc_control_flag[] = {
+ {"vr-mmio-30mb", "vr-mmio-62mb", 4},
+ {"usb-port-master", "usb-port-slave", 9},
+ {"burst-length-8", "burst-length-1", 10},
+ {"usb-slave-cpu", "usb-slave-8051", 11},
+ {"dac-power-enable", "dac-power-disable", 12},
+ {"pll-clock-count-disable", "pll-clock-count-enable", 15},
+ {"interrupt-normal", "interrupt-invarted", 16},
+ {"sh-ready-low", "sh-ready-high", 17},
+ {"xtal-freq-24mhz", "xtal-freq-12mhz", 24},
+ {"panel-data-18bit", "panel-dtat-24bit", 25},
+ {"latch-address-disable", "latch-address-enable", 26},
+ {"uart1", "ssp1", 27},
+ {},
+};
+
+/* Read configuration values */
+static void sm501_of_read_config(struct device *dev, struct device_node *np,
+ const char *prefix,
+ const struct sm501_config_props_uint *props,
+ const struct sm501_config_props_flag *props_flag,
+ struct sm501_reg_init *ret)
+{
+ struct device_node *child;
+ char *name;
+ u32 shift;
+ u32 width;
+ u32 mask;
+ u32 val;
+
+ ret->mask = ~0;
+ ret->set = 0;
+
+ child = of_get_child_by_name(np, prefix);
+ if (!child)
+ return;
+
+ while (props->name) {
+ name = props->name;
+ shift = props->shift;
+ props++;
+
+ if (name[0] == '-' ||
+ of_property_read_u32(child, name, &val))
+ continue;
+
+ width = props->shift - shift;
+ mask = (1 << width) - 1;
+ if (mask < val) {
+ dev_warn(dev, "%s invalid value %d", name, val);
+ continue;
+ }
+ mask = ~(mask << shift);
+ ret->mask &= mask;
+ ret->set |= val << shift;
+ }
+ while (props_flag->clr_name) {
+ val = ~0;
+ if (of_property_read_bool(child, props_flag->clr_name))
+ val = 0;
+ else if (of_property_read_bool(child, props_flag->set_name))
+ val = 1;
+ if (val != ~0) {
+ val <<= (props_flag->bit & 31);
+ mask = 1 << (props_flag->bit & 31);
+ ret->mask &= ~mask;
+ ret->set |= val;
+ }
+ props_flag++;
+ }
+}
+
+/* Read GPIO control */
+/*
+ * DT example.
+ * gpio-pin-control {
+ * pin@0 {
+ * gpio-port;
+ * };
+ * pin@1 {
+ * function;
+ * };
+ * };
+ */
+static void sm501_of_read_gpio(struct device *dev, struct device_node *np,
+ struct sm501_reg_init *hi, struct sm501_reg_init *low)
+{
+ struct device_node *gpio_group, *pin;
+ const char *prop_mode;
+ unsigned int pin_no;
+ int mode;
+ u64 mask;
+ u64 set;
+
+ mask = ~0;
+ set = 0;
+ gpio_group = of_get_child_by_name(np, "gpio-pin-control");
+ if (gpio_group) {
+ for_each_child_of_node(gpio_group, pin) {
+ mode = -1;
+ if (sscanf(pin->full_name, "pin@%u", &pin_no) == 1) {
+ if (of_property_read_bool(pin, "gpio-port"))
+ mode = 0;
+ else if (of_property_read_bool(pin, "function"))
+ mode = 1;
+ }
+ /* GPIO0 - 47 and 55 -63 */
+ if (mode < 0 ||
+ (pin_no >= 64 || (pin_no >= 48 && pin_no <= 54))) {
+ dev_warn(dev,
+ "%s mode %s is invalid.", pin->name, prop_mode);
+ } else {
+ mask &= ~(1 << pin_no);
+ set |= mode << pin_no;
+ }
+ }
+ }
+ hi->set = set >> 32;
+ low->set = set & 0xffffffff;
+ hi->mask = mask >> 32;
+ low->mask = mask & 0xffffffff;
+}
+
+static inline int read_i2c_prop(struct device *dev, struct device_node *child,
+ const char *name, u32 *val)
+{
+ if (of_property_read_u32(child, name, val)) {
+ dev_warn(dev, "%s/%s not found. skip it.", of_node_full_name(child), name);
+ return -ENOENT;
+ }
+ return 0;
+}
+
+/* Read GPIO I2C configuration */
+/*
+ * DT example.
+ * gpio-i2c {
+ * i2c@0 {
+ * sda = <gpio-pin>;
+ * scl = <gpio-pin>;
+ * delay = <delay>;
+ * timeout = <timeout>;
+ * };
+ * i2c@1 {
+ * :
+ * };
+ * :
+ * };
+ */
+static int sm501_parse_dt_gpio_i2c(struct device *dev, struct sm501_platdata *plat,
+ struct device_node *np)
+{
+ struct device_node *i2c_group, *child;
+ unsigned int i;
+ u32 i2c_nr;
+ int err;
+
+ i2c_group = of_get_child_by_name(np, "gpio-i2c");
+ if (!i2c_group)
+ return 0;
+
+ i2c_nr = of_get_child_count(i2c_group);
+ plat->gpio_i2c = devm_kzalloc(dev, sizeof(*plat->gpio_i2c) * i2c_nr,
+ GFP_KERNEL);
+ if (!plat->gpio_i2c)
+ return -ENOMEM;
+
+ plat->gpio_i2c_nr = i2c_nr;
+ i = 0;
+ for_each_child_of_node(i2c_group, child) {
+ u32 bus;
+
+ if (sscanf(child->full_name, "i2c@%u", &bus) != 1) {
+ dev_warn(dev, "Unknown address %s\n", child->name);
+ continue;
+ }
+
+ err = 0;
+ plat->gpio_i2c[i].bus_num = bus;
+ err += read_i2c_prop(dev, child, "sda", &plat->gpio_i2c[i].pin_sda);
+ err += read_i2c_prop(dev, child, "scl", &plat->gpio_i2c[i].pin_scl);
+ err += read_i2c_prop(dev, child, "delay", &plat->gpio_i2c[i].udelay);
+ err += read_i2c_prop(dev, child, "timeout", &plat->gpio_i2c[i].timeout);
+ if (err == 0)
+ i++;
+ }
+
+ return 0;
+}
+
+/* Read device functions */
+static u32 sm501_read_devices(struct device *dev, struct device_node *np)
+{
+ static const char * const funcname[] = {
+ "usb-host", "usb-slave", "ssp0", "ssp1",
+ "uart0", "uart1", "fbaccel", "ac97",
+ "i2s", "gpio",
+ };
+ struct property *prop;
+ unsigned int i;
+ const char *s;
+ u32 ret = 0;
+
+ of_property_for_each_string(np, "smi,devices", prop, s) {
+ for (i = 0; i < ARRAY_SIZE(funcname); i++) {
+ if (strcmp(s, funcname[i]) == 0) {
+ ret |= 1 << i;
+ goto next;
+ }
+ }
+ dev_warn(dev, "Unknown device function '%s'", s);
+next:
+ }
+ if (!ret)
+ dev_warn(dev, "devices not defined. disable all functions.");
+ return ret;
+}
+
+/* Build platform_data from OF property */
+struct plat_dt {
+ struct sm501_platdata plat;
+ struct sm501_initdata init;
+};
+
+static int sm501_parse_dt(struct sm501_devdata *sm, struct device_node *np)
+{
+ struct sm501_platdata *plat;
+ struct plat_dt *dt_p;
+ u32 word;
+ int ret;
+
+ dt_p = devm_kzalloc(sm->dev, sizeof(*dt_p), GFP_KERNEL);
+ if (!dt_p)
+ return -ENOMEM;
+
+ plat = &dt_p->plat;
+ plat->init = &dt_p->init;
+
+ plat->init->devices = sm501_read_devices(sm->dev, np);
+ /* mclk and m1xclk are not u32, so convert between them using intermediate variables. */
+ of_property_read_u32(np, "smi,mclk", &word);
+ plat->init->mclk = word;
+ of_property_read_u32(np, "smi,m1xclk", &word);
+ plat->init->m1xclk = word;
+
+ sm501_of_read_config(sm->dev, np, "misc-timing",
+ misc_timing, misc_timing_flag,
+ &plat->init->misc_timing);
+ sm501_of_read_config(sm->dev, np, "misc-control",
+ misc_control, misc_control_flag,
+ &plat->init->misc_control);
+ sm501_of_read_gpio(sm->dev, np,
+ &plat->init->gpio_high, &plat->init->gpio_low);
+
+ if (IS_ENABLED(CONFIG_MFD_SM501_GPIO) &&
+ (plat->init->devices & SM501_USE_GPIO)) {
+ ret = sm501_parse_dt_gpio_i2c(sm->dev, plat, np);
+ if (ret)
+ return ret;
+ }
+ sm->platdata = plat;
+ return 0;
+}
+
static int sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
@@ -1406,6 +1715,12 @@ static int sm501_plat_probe(struct platform_device *dev)
goto err_res;
}
+ if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
+ ret = sm501_parse_dt(sm, dev->dev.of_node);
+ if (ret)
+ goto err_res;
+ }
+
platform_set_drvdata(dev, sm);
sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
@@ -1932,6 +1932,106 @@ static int sm501fb_start_one(struct sm501fb_info *info,
return 0;
}
+#if defined(CONFIG_OF)
+static u32 read_display_flags(struct device_node *np)
+{
+ static const char * const name[] = {
+ "use-init-done", "disable-at-exit", "use-hwcursor", "use-hwaccel",
+ "panel-no-fpen", "panel-no-vbiasen", "panel-inv-fpen", "panel-inv-vbiasen",
+ };
+
+ struct property *prop;
+ unsigned int i;
+ const char *s;
+ u32 ret = 0;
+
+ of_property_for_each_string(np, "smi,flags", prop, s) {
+ for (i = 0; i < ARRAY_SIZE(name); i++) {
+ if (strcmp(s, name[i]) == 0) {
+ ret |= 1 << i;
+ break;
+ }
+ }
+ }
+ return ret;
+}
+
+/* parse CRT / panel configuration */
+static struct sm501_platdata_fbsub *dt_fbsub(struct device *dev,
+ struct device_node *np,
+ const char *name)
+{
+ struct sm501_platdata_fbsub *fbsub = NULL;
+ struct fb_videomode *def_mode = NULL;
+ struct device_node *child;
+ const void *p_edid;
+ u32 flags = 0;
+ u32 bpp = 0;
+ int len;
+
+ child = of_get_child_by_name(np, name);
+ if (child == NULL)
+ return NULL;
+
+ p_edid = of_get_property(child, "edid", &len);
+ if (p_edid && len == EDID_LENGTH) {
+ struct fb_monspecs *specs;
+ u8 *edid;
+
+ edid = kmemdup(p_edid, EDID_LENGTH, GFP_KERNEL);
+ if (edid) {
+ specs = kzalloc(sizeof(*specs), GFP_KERNEL);
+ if (specs) {
+ fb_edid_to_monspecs(edid, specs);
+ def_mode = specs->modedb;
+ }
+ }
+ kfree(edid);
+ }
+
+ of_property_read_u32(child, "bpp", &bpp);
+
+ /* If flags property is obtained, fbsub is returned. */
+ flags = read_display_flags(child);
+ if (flags) {
+ fbsub = devm_kzalloc(dev, sizeof(*fbsub), GFP_KERNEL);
+ if (fbsub) {
+ fbsub->def_mode = def_mode;
+ fbsub->def_bpp = bpp;
+ fbsub->flags = flags;
+ }
+ }
+ return fbsub;
+}
+
+/* Build platform_data from OF property */
+static struct sm501_platdata_fb *pdata_from_dt(struct device *dev, struct device_node *np)
+{
+ enum sm501_fb_routing fb_route = SM501_FB_OWN;
+ struct sm501_platdata_fb *pdata = NULL;
+ struct sm501_platdata_fbsub *fb_crt;
+ struct sm501_platdata_fbsub *fb_pnl;
+ unsigned int flags = 0;
+
+ if (of_property_read_bool(np, "route-crt-panel"))
+ fb_route = SM501_FB_CRT_PANEL;
+ if (of_property_read_bool(np, "swap-fb-endian"))
+ flags = SM501_FBPD_SWAP_FB_ENDIAN;
+ fb_crt = dt_fbsub(dev, np, "crt");
+ fb_pnl = dt_fbsub(dev, np, "panel");
+ if (fb_crt || fb_pnl) {
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (pdata) {
+ pdata->fb_route = fb_route;
+ pdata->flags = flags;
+ pdata->fb_crt = fb_crt;
+ pdata->fb_pnl = fb_pnl;
+ }
+ }
+ return pdata;
+}
+#endif
+
static int sm501fb_probe(struct platform_device *pdev)
{
struct sm501fb_info *info;
@@ -1974,6 +2074,12 @@ static int sm501fb_probe(struct platform_device *pdev)
if (info->edid_data)
found = 1;
}
+ /* Get platform data compatible configuration */
+ if (!found) {
+ info->pdata = pdata_from_dt(dev, np);
+ if (info->pdata)
+ found = 1;
+ }
}
#endif
if (!found) {
Various parameters of SM501 can be set using platform_data, so parameters cannot be passed in the DeviceTree target. Expands the parameters set in platform_data so that they can be specified using DeviceTree properties. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- drivers/mfd/sm501.c | 315 ++++++++++++++++++++++++++++++++++ drivers/video/fbdev/sm501fb.c | 106 ++++++++++++ 2 files changed, 421 insertions(+)