From patchwork Thu Sep 12 18:25:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arturs Artamonovs via B4 Relay X-Patchwork-Id: 828098 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8816B1C2DC9; Thu, 12 Sep 2024 18:20:18 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726165218; cv=none; b=AW7cXJl2k4mdiIl/tnJNYfQlPwXvgfQWoevvlixUEW3ijvrL1H+5KVYLwr/7F+YplQrypH4hvihx2U6SL4VB1v3ficwzx6uTQkZ8+pMEUaVIq5mFPJN0Y6GxQu8J3cFphFrOKjewLSRZT7q4hd6GbRyQjKr+sKqqqIioFCeSGAQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726165218; c=relaxed/simple; bh=08rrGrrtrIaYM4CMpLN0nNY+AYSy4V4IJi7+yk9IBFw=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=pjdMf0DuXKMueJJLGGOYL4ABZFc3LAc2IEJtA4BbpHKQFaKp/jkIqdeupEZZ9fevmg3WVR5u7+CRBqVoGSyy5pV/I/ogHUQx45c/a/qmh9LY/8E2k3rhrBs3hVxcaezR0uUJOcVo/kECyArn48DvRtGGohnNCtfwseXJbQaLbJM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=fJ9QlbYb; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="fJ9QlbYb" Received: by smtp.kernel.org (Postfix) with ESMTPS id 5C727C4FDF1; Thu, 12 Sep 2024 18:20:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1726165216; bh=08rrGrrtrIaYM4CMpLN0nNY+AYSy4V4IJi7+yk9IBFw=; h=From:Date:Subject:References:In-Reply-To:List-Id:To:Cc:Reply-To: From; b=fJ9QlbYbHRLnMHPULtEOJ0e2dyh8bCG1lLkgzCKHvx2+4ItG+e5GwqSvK0gGC6Dvz MWV9l6ZJnTiM97tOQNE4x+yvbE5jgAZIDZMb+7n2Jbm5kWSIQeemelT8/CyzL8odhU mlM82PnoyR5Ua7aNXSpDZFUeDoPLcjAmhLW1+XYSCpeg5u+4nJ4fN5h3Hp3ZxJ160c C4JvkWQer15nFtFsmjj9pqcWgscSOj6/YdvoOsKyH8m8so5PKB3z/6A0ty4459gqha ADwgCQh5GXdefElXCaNe9Ubm2rtKmELuXegZWbCgrjqVpiYuJ5RWUzEcKdRORoxqaY NzDxUcFsGLWUw== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 515D9EEE262; Thu, 12 Sep 2024 18:20:16 +0000 (UTC) From: Arturs Artamonovs via B4 Relay Date: Thu, 12 Sep 2024 19:25:02 +0100 Subject: [PATCH 17/21] serial: adi,uart: Add driver for ADI ADSP-SC5xx Precedence: bulk X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240912-test-v1-17-458fa57c8ccf@analog.com> References: <20240912-test-v1-0-458fa57c8ccf@analog.com> In-Reply-To: <20240912-test-v1-0-458fa57c8ccf@analog.com> To: Catalin Marinas , Will Deacon , Greg Malysa , Philipp Zabel , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Utsav Agarwal , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Thomas Gleixner , Andi Shyti , Greg Kroah-Hartman , Jiri Slaby , Arnd Bergmann , Olof Johansson , soc@kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org, Arturs Artamonovs , adsp-linux@analog.com, Arturs Artamonovs , Nathan Barrett-Morrison X-Mailer: b4 0.15-dev-7be4f X-Developer-Signature: v=1; a=ed25519-sha256; t=1726165513; l=33930; i=arturs.artamonovs@analog.com; s=20240909; h=from:subject:message-id; bh=DvfU37hVhNRYyO5LsqnmjnpDiC1h7qtXUog11TyP7jU=; b=0KuNbaB56olmWmG84P2NmiyQHkuKcGe6oUbE6QlhJ6tbw60h0Ep2p2GQW6yt33YyWU77NGXeL UFpsqgEJ09RAZ0Stfq1t/07WCFGtWNpHsTAJ3zAg+gmy3x+Mvqc83Ns X-Developer-Key: i=arturs.artamonovs@analog.com; a=ed25519; pk=UXODIid/MrmBXvqkX4PeEfetDaNAw9xKMINHIc5oZCk= X-Endpoint-Received: by B4 Relay for arturs.artamonovs@analog.com/20240909 with auth_id=206 X-Original-From: Arturs Artamonovs Reply-To: arturs.artamonovs@analog.com From: Arturs Artamonovs Adding UART driver,supports all ADSP-SC5xx SoC family - Support FIFO mode - Support earlyprintk - Support Enable Divide By One support, for higher clock resolutions. Signed-off-by: Arturs Artamonovs Signed-off-by: Utsav Agarwal Co-developed-by: Nathan Barrett-Morrison Signed-off-by: Nathan Barrett-Morrison Co-developed-by: Greg Malysa Signed-off-by: Greg Malysa --- drivers/tty/serial/Kconfig | 19 +- drivers/tty/serial/Makefile | 1 + drivers/tty/serial/adi_uart.c | 1045 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 4 files changed, 1067 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 28e4beeabf8f373fc76e09ea7d1c9d55a66f4964..1d1d8fc808969c721d5931127d9294fb17d9c249 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -471,6 +471,23 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_ADI_UART + tristate "ADI uart serial port support" + depends on ARCH_SC59X = y || ARCH_SC59X_64 = y + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + Add support for the built-in adi uart driver. + +config SERIAL_ADI_UART_CONSOLE + bool "Console on ADI uart serial port" + depends on SERIAL_ADI_UART + default y + select SERIAL_CORE_CONSOLE + help + If you have enabled the ADI UART serial port, you can + make it the console by answering Y to this option. + config SERIAL_IMX tristate "IMX serial port support" depends on ARCH_MXC || COMPILE_TEST @@ -771,7 +788,7 @@ config SERIAL_CPM depends on CPM2 || CPM1 select SERIAL_CORE help - This driver supports the SCC and SMC serial ports on Motorola + This driver supports the SCC and SMC serial ports on Motorola embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) config SERIAL_CPM_CONSOLE diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 6ff74f0a9530c4f6e058a848f74084f3b63a730a..9d4920b51b55af70c285d9bcaef53cc01a69b898 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o +obj-$(CONFIG_SERIAL_ADI_UART) += adi_uart.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX310X) += max310x.o obj-$(CONFIG_SERIAL_MCF) += mcf.o diff --git a/drivers/tty/serial/adi_uart.c b/drivers/tty/serial/adi_uart.c new file mode 100644 index 0000000000000000000000000000000000000000..dfbc7dcfd6169a299d4b1580e56f5ba0a3d8cc12 --- /dev/null +++ b/drivers/tty/serial/adi_uart.c @@ -0,0 +1,1045 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADI On-Chip Two Wire Interface Driver + * + * Copyright 2022-2024 - Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_ADI_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#define DRIVER_NAME "adi-uart" + +struct adi_uart_serial_port { + struct uart_port port; + struct device *dev; + unsigned int old_status; + int tx_irq; + int rx_irq; + int status_irq; + unsigned int lsr; + unsigned int hwflow_mode; + struct gpio_desc *hwflow_en_pin; + bool hwflow_en; + /* Use enable-divide-by-one in divisor? */ + bool edbo; + struct clk *clk; +}; + +#define ADI_UART_NO_HWFLOW 0 +#define ADI_UART_HWFLOW_PERI 1 + +#define ADI_UART_NR_PORTS 4 +static struct adi_uart_serial_port *adi_uart_serial_ports[ADI_UART_NR_PORTS]; + +/* UART_CTL Masks */ +#define UCEN 0x1 /* Enable UARTx Clocks */ +#define LOOP_ENA 0x2 /* Loopback Mode Enable */ +#define UMOD_MDB 0x10 /* Enable MDB Mode */ +#define UMOD_IRDA 0x20 /* Enable IrDA Mode */ +#define UMOD_MASK 0x30 /* Uart Mode Mask */ +#define WLS(x) (((x-5) & 0x03) << 8) /* Word Length Select */ +#define WLS_MASK 0x300 /* Word length Select Mask */ +#define WLS_OFFSET 8 /* Word length Select Offset */ +#define STB 0x1000 /* Stop Bits */ +#define STBH 0x2000 /* Half Stop Bits */ +#define PEN 0x4000 /* Parity Enable */ +#define EPS 0x8000 /* Even Parity Select */ +#define STP 0x10000 /* Stick Parity */ +#define FPE 0x20000 /* Force Parity Error On Transmit */ +#define FFE 0x40000 /* Force Framing Error On Transmit */ +#define SB 0x80000 /* Set Break */ +#define LCR_MASK (SB | STP | EPS | PEN | STB | WLS_MASK) +#define FCPOL 0x400000 /* Flow Control Pin Polarity */ +#define RPOLC 0x800000 /* IrDA RX Polarity Change */ +#define TPOLC 0x1000000 /* IrDA TX Polarity Change */ +#define MRTS 0x2000000 /* Manual Request To Send */ +#define XOFF 0x4000000 /* Transmitter Off */ +#define ARTS 0x8000000 /* Automatic Request To Send */ +#define ACTS 0x10000000 /* Automatic Clear To Send */ +#define RFIT 0x20000000 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x40000000 /* Receive FIFO RTS Threshold */ + +/* UART_STAT Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x80 /* TSR and UART_THR Empty */ +#define TFI 0x100 /* Transmission Finished Indicator */ + +#define ASTKY 0x200 /* Address Sticky */ +#define ADDR 0x400 /* Address bit status */ +#define RO 0x800 /* Reception Ongoing */ +#define SCTS 0x1000 /* Sticky CTS */ +#define CTS 0x10000 /* Clear To Send */ +#define RFCS 0x20000 /* Receive FIFO Count Status */ + +/* UART_CLOCK Masks */ +#define EDBO 0x80000000 /* Enable Devide by One */ + +/* UART_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ +#define EDSSI 0x08 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +# define OFFSET_REDIV 0x00 /* Version ID Register */ +# define OFFSET_CTL 0x04 /* Control Register */ +# define OFFSET_STAT 0x08 /* Status Register */ +# define OFFSET_SCR 0x0C /* SCR Scratch Register */ +# define OFFSET_CLK 0x10 /* Clock Rate Register */ +# define OFFSET_IER 0x14 /* Interrupt Enable Register */ +# define OFFSET_IER_SET 0x18 /* Set Interrupt Enable Register */ +# define OFFSET_IER_CLEAR 0x1C /* Clear Interrupt Enable Register */ +# define OFFSET_RBR 0x20 /* Receive Buffer register */ +# define OFFSET_THR 0x24 /* Transmit Holding register */ + +#define UART_GET_CHAR(p) readl(p->port.membase + OFFSET_RBR) +#define UART_GET_CLK(p) readl(p->port.membase + OFFSET_CLK) +#define UART_GET_CTL(p) readl(p->port.membase + OFFSET_CTL) +#define UART_GET_GCTL(p) UART_GET_CTL(p) +#define UART_GET_LCR(p) UART_GET_CTL(p) +#define UART_GET_MCR(p) UART_GET_CTL(p) +#define UART_GET_STAT(p) readl(p->port.membase + OFFSET_STAT) +#define UART_GET_MSR(p) UART_GET_STAT(p) + +#define UART_PUT_CHAR(p, v) writel(v, p->port.membase + OFFSET_THR) +#define UART_PUT_CLK(p, v) writel(v, p->port.membase + OFFSET_CLK) +#define UART_PUT_CTL(p, v) writel(v, p->port.membase + OFFSET_CTL) +#define UART_PUT_GCTL(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_LCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_MCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_STAT(p, v) writel(v, p->port.membase + OFFSET_STAT) + +#define UART_CLEAR_IER(p, v) writel(v, p->port.membase + OFFSET_IER_CLEAR) +#define UART_GET_IER(p) readl(p->port.membase + OFFSET_IER) +#define UART_SET_IER(p, v) writel(v, p->port.membase + OFFSET_IER_SET) + +#define UART_CLEAR_LSR(p) UART_PUT_STAT(p, -1) +#define UART_GET_LSR(p) UART_GET_STAT(p) +#define UART_PUT_LSR(p, v) UART_PUT_STAT(p, v) + +/* This handles hard CTS/RTS */ +#define UART_CLEAR_SCTS(p) UART_PUT_STAT(p, SCTS) +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#define DMA_RX_XCOUNT 512 +#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) + +#define DMA_RX_FLUSH_JIFFIES (msecs_to_jiffies(50)) + + +static void adi_uart_serial_tx_chars(struct adi_uart_serial_port *uart); +static void adi_uart_serial_reset_irda(struct uart_port *port); + + +static struct adi_uart_serial_port *to_adi_serial_port(struct uart_port *port) +{ + return container_of(port, struct adi_uart_serial_port, port); +} + +static unsigned int adi_uart_serial_get_mctrl(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + if (!uart->hwflow_mode || !uart->hwflow_en) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (UART_GET_CTS(uart)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void adi_uart_serial_set_mctrl(struct uart_port *port, + unsigned int mctrl) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + if (!uart->hwflow_mode || !uart->hwflow_en) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + UART_ENABLE_RTS(uart); + else + UART_DISABLE_RTS(uart); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t adi_uart_serial_mctrl_cts_int(int irq, void *dev_id) +{ + struct adi_uart_serial_port *uart = dev_id; + unsigned int status = adi_uart_serial_get_mctrl(&uart->port); + struct tty_struct *tty = uart->port.state->port.tty; + + if (uart->hwflow_mode == ADI_UART_HWFLOW_PERI) { + UART_CLEAR_SCTS(uart); + if (tty->hw_stopped) { + if (status) { + tty->hw_stopped = 0; + uart_write_wakeup(&uart->port); + } + } else { + if (!status) + tty->hw_stopped = 1; + } + } + + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); + + return IRQ_HANDLED; +} + +/* + * interrupts are disabled on entry + */ +static void adi_uart_serial_stop_tx(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + while (!(UART_GET_LSR(uart) & TEMT)) + cpu_relax(); + + UART_PUT_LSR(uart, TFI); + UART_CLEAR_IER(uart, ETBEI); +} + +/* + * port is locked and interrupts are disabled + */ +static void adi_uart_serial_start_tx(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + struct tty_struct *tty = uart->port.state->port.tty; + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios.c_line == N_IRDA) + adi_uart_serial_reset_irda(port); + + UART_SET_IER(uart, ETBEI); + adi_uart_serial_tx_chars(uart); +} + +/* + * Interrupts are enabled + */ +static void adi_uart_serial_stop_rx(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + UART_CLEAR_IER(uart, ERBFI); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void adi_uart_serial_enable_ms(struct uart_port *port) +{ +} + +static void adi_uart_serial_rx_chars(struct adi_uart_serial_port *uart) +{ + unsigned int status, ch, flg; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); + uart->port.icount.rx++; + + if (status & BI) { + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + if (uart_handle_sysrq_char(&uart->port, ch)) + goto ignore_char; + + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(&uart->port.state->port); +} + +static void adi_uart_serial_tx_chars(struct adi_uart_serial_port *uart) +{ + struct tty_port *tport = &uart->port.state->port; + unsigned char c; + + if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(&uart->port)) { + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + if (UART_GET_LSR(uart) & THRE) { + /* pop data from fifo */ + if (kfifo_get(&tport->xmit_fifo, &c)) { + UART_PUT_CHAR(uart, c); + uart->port.icount.tx++; + } + } + + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); +} + +static irqreturn_t adi_uart_serial_rx_int(int irq, void *dev_id) +{ + struct adi_uart_serial_port *uart = dev_id; + + while (UART_GET_LSR(uart) & DR) + adi_uart_serial_rx_chars(uart); + + return IRQ_HANDLED; +} + +static irqreturn_t adi_uart_serial_tx_int(int irq, void *dev_id) +{ + struct adi_uart_serial_port *uart = dev_id; + + spin_lock(&uart->port.lock); + if (UART_GET_LSR(uart) & THRE) + adi_uart_serial_tx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int adi_uart_serial_tx_empty(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + unsigned int lsr; + + lsr = UART_GET_LSR(uart); + if (lsr & TEMT) + return TIOCSER_TEMT; + else + return 0; +} + +static void adi_uart_serial_break_ctl(struct uart_port *port, int break_state) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + u32 lcr = UART_GET_LCR(uart); + + if (break_state) + lcr |= SB; + else + lcr &= ~SB; + UART_PUT_LCR(uart, lcr); +} + +static int adi_uart_serial_startup(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + int ret; + + ret = clk_prepare_enable(uart->clk); + if (ret) + return ret; + + if (uart->hwflow_mode == ADI_UART_HWFLOW_PERI) { + /* CTS RTS PINs are negative assertive. */ + UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS); + UART_SET_IER(uart, EDSSI); + } + + UART_SET_IER(uart, ERBFI); + return 0; +} + +static void adi_uart_serial_shutdown(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + dev_dbg(uart->dev, "in serial_shutdown\n"); + + clk_disable_unprepare(uart->clk); +} + +static void adi_uart_serial_set_termios(struct uart_port *port, + struct ktermios *termios, const struct ktermios *old) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + unsigned long flags; + unsigned int baud, quot; + unsigned int ier, lcr = 0; + unsigned long timeout; + + if (uart->hwflow_mode == ADI_UART_HWFLOW_PERI) + termios->c_cflag |= CRTSCTS; + + switch (termios->c_cflag & CSIZE) { + case CS8: + lcr = WLS(8); + break; + case CS7: + lcr = WLS(7); + break; + case CS6: + lcr = WLS(6); + break; + case CS5: + lcr = WLS(5); + break; + default: + dev_err(port->dev, "%s: word length not supported\n", + __func__); + } + + if (termios->c_cflag & CSTOPB) + lcr |= STB; + if (termios->c_cflag & PARENB) + lcr |= PEN; + if (!(termios->c_cflag & PARODD)) + lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; + if (termios->c_cflag & CRTSCTS) + uart->hwflow_en = true; + else + uart->hwflow_en = false; + + spin_lock_irqsave(&uart->port.lock, flags); + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + /* + * uart_get_divisor has a hardcoded /16 factor that will cause integer + * round off errors if we're in divide-by-one mode + */ + if (uart->edbo) { + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk); + quot = EDBO | DIV_ROUND_CLOSEST(port->uartclk, baud); + } else { + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk/16); + quot = uart_get_divisor(port, baud); + } + + /* Wait till the transfer buffer is empty */ + timeout = jiffies + msecs_to_jiffies(10); + while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT)) + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX buffer empty\n"); + break; + } + + /* Wait till the transfer buffer is empty */ + timeout = jiffies + msecs_to_jiffies(10); + while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT)) + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX buffer empty\n"); + break; + } + + /* Disable UART */ + ier = UART_GET_IER(uart); + UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN); + UART_DISABLE_INTS(uart); + + UART_PUT_CLK(uart, quot); + + UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr); + + /* Enable UART */ + UART_ENABLE_INTS(uart, ier); + UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&uart->port.lock, flags); +} + +static const char *adi_uart_serial_type(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + return uart->port.type == PORT_BFIN ? "ADI-UART" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void adi_uart_serial_release_port(struct uart_port *port) +{ +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int adi_uart_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void adi_uart_serial_config_port(struct uart_port *port, int flags) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + if (flags & UART_CONFIG_TYPE && + adi_uart_serial_request_port(&uart->port) == 0) + uart->port.type = PORT_BFIN; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_BFIN and PORT_UNKNOWN + */ +static int +adi_uart_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return 0; +} + +/* + * Enable the IrDA function if tty->ldisc.num is N_IRDA. + * In other cases, disable IrDA function. + */ +static void adi_uart_serial_set_ldisc(struct uart_port *port, + struct ktermios *termios) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + unsigned int val; + + switch (termios->c_line) { + case N_IRDA: + val = UART_GET_GCTL(uart); + val |= (UMOD_IRDA | RPOLC); + UART_PUT_GCTL(uart, val); + break; + default: + val = UART_GET_GCTL(uart); + val &= ~(UMOD_MASK | RPOLC); + UART_PUT_GCTL(uart, val); + } +} + +static void adi_uart_serial_reset_irda(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + unsigned int val; + + val = UART_GET_GCTL(uart); + val &= ~(UMOD_MASK | RPOLC); + UART_PUT_GCTL(uart, val); + val |= (UMOD_IRDA | RPOLC); + UART_PUT_GCTL(uart, val); +} + +#ifdef CONFIG_CONSOLE_POLL +static void adi_uart_serial_poll_put_char(struct uart_port *port, + unsigned char chr) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int adi_uart_serial_poll_get_char(struct uart_port *port) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + + +static const struct uart_ops adi_uart_serial_pops = { + .tx_empty = adi_uart_serial_tx_empty, + .set_mctrl = adi_uart_serial_set_mctrl, + .get_mctrl = adi_uart_serial_get_mctrl, + .stop_tx = adi_uart_serial_stop_tx, + .start_tx = adi_uart_serial_start_tx, + .stop_rx = adi_uart_serial_stop_rx, + .enable_ms = adi_uart_serial_enable_ms, + .break_ctl = adi_uart_serial_break_ctl, + .startup = adi_uart_serial_startup, + .shutdown = adi_uart_serial_shutdown, + .set_termios = adi_uart_serial_set_termios, + .set_ldisc = adi_uart_serial_set_ldisc, + .type = adi_uart_serial_type, + .release_port = adi_uart_serial_release_port, + .request_port = adi_uart_serial_request_port, + .config_port = adi_uart_serial_config_port, + .verify_port = adi_uart_serial_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = adi_uart_serial_poll_put_char, + .poll_get_char = adi_uart_serial_poll_get_char, +#endif +}; + +#ifdef CONFIG_SERIAL_ADI_UART_CONSOLE +static void adi_uart_serial_console_putchar(struct uart_port *port, + unsigned char ch) +{ + struct adi_uart_serial_port *uart = to_adi_serial_port(port); + + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); +} + +static void __init +adi_uart_serial_console_get_options(struct adi_uart_serial_port *uart, + int *baud, int *parity, int *bits) +{ + unsigned int status; + + status = UART_GET_IER(uart) & (ERBFI | ETBEI); + if (status == (ERBFI | ETBEI)) { + /* ok, the port was enabled */ + u32 lcr, clk; + + lcr = UART_GET_LCR(uart); + + *parity = 'n'; + if (lcr & PEN) { + if (lcr & EPS) + *parity = 'e'; + else + *parity = 'o'; + } + *bits = ((lcr & WLS_MASK) >> WLS_OFFSET) + 5; + + clk = UART_GET_CLK(uart); + + /* Only the lowest 16 bits are the divisor */ + if (clk & EDBO) + *baud = uart->port.uartclk / (clk & 0xffff); + else + *baud = uart->port.uartclk / (16*clk); + } + pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, + *baud, *parity, *bits); +} + +static void +adi_uart_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct adi_uart_serial_port *uart = adi_uart_serial_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, + adi_uart_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + +} + +static int __init +adi_uart_serial_console_setup(struct console *co, char *options) +{ + struct adi_uart_serial_port *uart; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index < 0 || co->index >= ADI_UART_NR_PORTS) + return -ENODEV; + + uart = adi_uart_serial_ports[co->index]; + if (!uart) + return -ENODEV; + + if (uart->hwflow_mode == ADI_UART_HWFLOW_PERI) + flow = 'r'; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + adi_uart_serial_console_get_options(uart, &baud, &parity, + &bits); + + return uart_set_options(&uart->port, co, baud, parity, bits, flow); +} + +static struct uart_driver adi_uart_serial_reg; + +static struct console adi_uart_serial_console = { + .name = "ttySC", + .write = adi_uart_serial_console_write, + .device = uart_console_device, + .setup = adi_uart_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &adi_uart_serial_reg, +}; + + +#define ADI_SERIAL_UART_CONSOLE (&adi_uart_serial_console) +#else +#define ADI_SERIAL_UART_CONSOLE NULL +#endif + +static struct uart_driver adi_uart_serial_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttySC", + .major = TTY_MAJOR, +#ifdef CONFIG_ARCH_SC59X_64 + // Other serial drivers are using 64 -- + // Can probably disable in the future and set this back to 64 + .minor = 74, +#else + .minor = 64, +#endif + .nr = ADI_UART_NR_PORTS, + .cons = ADI_SERIAL_UART_CONSOLE, +}; + +static int adi_uart_serial_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct adi_uart_serial_port *uart = platform_get_drvdata(pdev); + + clk_disable(uart->clk); + return uart_suspend_port(&adi_uart_serial_reg, &uart->port); +} + +static int adi_uart_serial_resume(struct platform_device *pdev) +{ + struct adi_uart_serial_port *uart = platform_get_drvdata(pdev); + int ret; + + ret = clk_enable(uart->clk); + if (ret) + return ret; + + return uart_resume_port(&adi_uart_serial_reg, &uart->port); +} + +static int adi_uart_serial_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct adi_uart_serial_port *uart = NULL; + int ret = 0; + int uartid; + dev_info(dev, "Serial probe\n"); + + uartid = of_alias_get_id(np, "serial"); + + if (uartid < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", + uartid); + ret = -ENODEV; + return ret; + } + + if (adi_uart_serial_ports[uartid] == NULL) { + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + adi_uart_serial_ports[uartid] = uart; + uart->dev = &pdev->dev; + + uart->clk = devm_clk_get(dev, "sclk0"); + if (IS_ERR(uart->clk)) + return -ENODEV; + + spin_lock_init(&uart->port.lock); + uart->port.uartclk = clk_get_rate(uart->clk); + uart->port.fifosize = 8; + uart->port.ops = &adi_uart_serial_pops; + uart->port.line = uartid; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + + uart->port.membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(uart->port.membase)) + return PTR_ERR(uart->port.membase); + + uart->tx_irq = platform_get_irq_byname(pdev, "tx"); + uart->rx_irq = platform_get_irq_byname(pdev, "rx"); + uart->status_irq = + platform_get_irq_byname(pdev, "status"); + uart->port.irq = uart->rx_irq;// + ret = devm_request_threaded_irq(dev, uart->rx_irq, + adi_uart_serial_rx_int, NULL, 0, "ADI UART RX", + uart); + if (ret) { + dev_err(dev, "Unable to attach UART RX int\n"); + return ret; + } + + ret = devm_request_threaded_irq(dev, uart->tx_irq, + adi_uart_serial_tx_int, NULL, 0, "ADI UART TX", + uart); + if (ret) { + dev_err(dev, "Unable to attach UART TX int\n"); + return ret; + } + + /* adi,uart-has-rtscts is deprecated */ + if (of_property_read_bool(np, "uart-has-rtscts") || + of_property_read_bool(np, "adi,uart-has-rtscts")) { + uart->hwflow_mode = ADI_UART_HWFLOW_PERI; + ret = devm_request_threaded_irq(dev, uart->status_irq, + adi_uart_serial_mctrl_cts_int, NULL, 0, + "ADI UART Modem Status", + uart); + if (ret) { + uart->hwflow_mode = ADI_UART_NO_HWFLOW; + dev_info(dev, + "Unable to attach UART Modem Status int.\n"); + } + } else + uart->hwflow_mode = ADI_UART_NO_HWFLOW; + + uart->edbo = false; + if (of_property_read_bool(np, "adi,use-edbo")) + uart->edbo = true; + + if (uart->hwflow_mode == ADI_UART_HWFLOW_PERI) { + uart->hwflow_en_pin = devm_gpiod_get(dev, "hwflow-en", + GPIOD_OUT_HIGH); + if (IS_ERR(uart->hwflow_en_pin)) { + dev_err(dev, + "hwflow-en required in peripheral hwflow mode\n"); + return PTR_ERR(uart->hwflow_en_pin); + } + } + } + + uart = adi_uart_serial_ports[uartid]; + uart->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, uart); + + ret = uart_add_one_port(&adi_uart_serial_reg, &uart->port); + if (!ret) + return 0; + + if (uart) { + adi_uart_serial_ports[uartid] = NULL; + kfree(uart); + } + + return ret; +} + +static void adi_uart_serial_remove(struct platform_device *pdev) +{ + struct adi_uart_serial_port *uart = platform_get_drvdata(pdev); + + dev_set_drvdata(&pdev->dev, NULL); + + if (uart) { + uart_remove_one_port(&adi_uart_serial_reg, &uart->port); + adi_uart_serial_ports[uart->port.line] = NULL; + kfree(uart); + } +} + +static const struct of_device_id adi_uart_dt_match[] = { + { .compatible = "adi,uart"}, + {}, +}; +MODULE_DEVICE_TABLE(of, adi_uart_dt_match); + +static struct platform_driver adi_uart_serial_driver = { + .probe = adi_uart_serial_probe, + .remove = adi_uart_serial_remove, + .suspend = adi_uart_serial_suspend, + .resume = adi_uart_serial_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = adi_uart_dt_match, + }, +}; + +static int __init adi_uart_serial_init(void) +{ + int ret; + + pr_info("ADI serial driver\n"); + + ret = uart_register_driver(&adi_uart_serial_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + adi_uart_serial_reg.driver_name, ret); + } + + ret = platform_driver_register(&adi_uart_serial_driver); + if (ret) { + pr_err("fail to register ADI uart\n"); + uart_unregister_driver(&adi_uart_serial_reg); + } + + return ret; +} + +static void __exit adi_uart_serial_exit(void) +{ + platform_driver_unregister(&adi_uart_serial_driver); + uart_unregister_driver(&adi_uart_serial_reg); +} + +module_init(adi_uart_serial_init); +module_exit(adi_uart_serial_exit); + +/* Early Console Support */ +static inline u32 adi_uart_read(struct uart_port *port, u32 off) +{ + return readl(port->membase + off); +} + +static inline void adi_uart_write(struct uart_port *port, u32 val, + u32 off) +{ + writel(val, port->membase + off); +} + + +static void adi_uart_wait_bit_set(struct uart_port *port, unsigned int offset, + u32 bit) +{ + while (!(adi_uart_read(port, offset) & bit)) + cpu_relax(); +} + + +static void adi_uart_console_putchar(struct uart_port *port, unsigned char ch) +{ + /* wait for the hardware fifo to clear up */ + adi_uart_wait_bit_set(port, OFFSET_STAT, THRE); + + /* queue the character for transmission */ + adi_uart_write(port, ch, OFFSET_THR); +} + + +static void adi_uart_early_write(struct console *con, const char *s, + unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, adi_uart_console_putchar); +} + + +static int __init adi_uart_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = adi_uart_early_write; + return 0; +} + +EARLYCON_DECLARE(adi_uart, adi_uart_early_console_setup); + +MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); +MODULE_DESCRIPTION("Blackfin/ADSP generic serial port driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); \ No newline at end of file diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9c007a106330b90b92cbcf60a9ac806b290d6d44..ce3c50dfa5cacd09eb30e93e408c2d92992ac755 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -109,6 +109,9 @@ /* Xilinx uartlite */ #define PORT_UARTLITE 74 +/* Blackfin */ +#define PORT_BFIN 75 + /* Broadcom BCM7271 UART */ #define PORT_BCM7271 76