From patchwork Thu Sep 12 18:24:58 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arturs Artamonovs via B4 Relay X-Patchwork-Id: 828948 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2FB9E1C1ABE; Thu, 12 Sep 2024 18:20:16 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726165216; cv=none; b=mt1YmQSL4f7G0r/MfPSYhTdYPS3pPoDQWemygvx8lw0bo1ci3IV8rHGP9se1Eeg2lFbg3KIMaFwCw4GC8Fl1/msVvxs8BeCXPqunaEWqw5fFLHpdkpyoXW0miJAdUa4oFQOCvhIqO2+E9gwdfK+kmOZD/WRW/sO5VVU+QTGfivw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726165216; c=relaxed/simple; bh=8dglV35vXsS56WaqjDfOErmL3gBQcYZfYc41JKx0CZY=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=ng84ccuIwIcEUykFXxiawdEOp6pJSV9zD143rs1gXC1e7JGj2rHhFxrPu2odwF9y3aULQUf/tHeCjO3XIjlTAqamdgMj8TjcjVvDURDf3FE3TsdE2Y2UzYGYquPZE1vABL3Qky2hRMXptc3VkOZ7YdbSMYvQr4FU3tz63IkoQTo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=a/FMMgWZ; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="a/FMMgWZ" Received: by smtp.kernel.org (Postfix) with ESMTPS id F1D39C4DE09; Thu, 12 Sep 2024 18:20:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1726165216; bh=8dglV35vXsS56WaqjDfOErmL3gBQcYZfYc41JKx0CZY=; h=From:Date:Subject:References:In-Reply-To:List-Id:To:Cc:Reply-To: From; b=a/FMMgWZnAfOevYv8VZ5xuo6wb7rOnkmAgiyborp47SLyRN4TjrZjBkTTxa6QD2m/ X6W8xJP9qpHTqMZ1RQzNiPEzffOELQ7spZ0OhvjO6IsCLcBRUlRNqgOVU7rxGiRxii Hv9vmdKcQmdpXz8c2lDkbHkzGMDki3MQG1yVmx2zuoAEAsH3b3Azs0Y/Pq9eF/j0nR 4GheDbvPtIqy1MNqikzfNaTkzHLqGNrCwYh29ePKWkmxWA/9DlSYrv4JjH0JJg4MoL vRSqbdQzngPrm1hJukVPX5GhDWpsNfn5MlbRmcn9gpHn/La4JRluNKph2Xo1I+p7N8 CwBYp/U26rZ9w== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id E54AEEEE25E; Thu, 12 Sep 2024 18:20:15 +0000 (UTC) From: Arturs Artamonovs via B4 Relay Date: Thu, 12 Sep 2024 19:24:58 +0100 Subject: [PATCH 13/21] pinctrl: Add drivers for ADI ADSP-SC5xx platform Precedence: bulk X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240912-test-v1-13-458fa57c8ccf@analog.com> References: <20240912-test-v1-0-458fa57c8ccf@analog.com> In-Reply-To: <20240912-test-v1-0-458fa57c8ccf@analog.com> To: Catalin Marinas , Will Deacon , Greg Malysa , Philipp Zabel , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Utsav Agarwal , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Thomas Gleixner , Andi Shyti , Greg Kroah-Hartman , Jiri Slaby , Arnd Bergmann , Olof Johansson , soc@kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org, Arturs Artamonovs , adsp-linux@analog.com, Arturs Artamonovs , Nathan Barrett-Morrison X-Mailer: b4 0.15-dev-7be4f X-Developer-Signature: v=1; a=ed25519-sha256; t=1726165513; l=29319; i=arturs.artamonovs@analog.com; s=20240909; h=from:subject:message-id; bh=GfxjQyaWdYihVTbmYZ8dKtXQxxhTt6kZCTW4eIPAJo8=; b=zU6rjIlKSsjPtuH6NdYWdBwgPpnIdUtfa9gVkK3cZ7u4PLhzAukEglamykqFZw7ApY9Cfx3+2 It5Yp2iMV2rAd9LiruUBX0WregtYH77bbVy5fdt8vbuKDYe0U/ufjg6 X-Developer-Key: i=arturs.artamonovs@analog.com; a=ed25519; pk=UXODIid/MrmBXvqkX4PeEfetDaNAw9xKMINHIc5oZCk= X-Endpoint-Received: by B4 Relay for arturs.artamonovs@analog.com/20240909 with auth_id=206 X-Original-From: Arturs Artamonovs Reply-To: arturs.artamonovs@analog.com From: Arturs Artamonovs Add ADSP-SC5xx pinctrler: - Support switching GPIO pin functions. Signed-off-by: Arturs Artamonovs Co-developed-by: Nathan Barrett-Morrison Signed-off-by: Nathan Barrett-Morrison Co-developed-by: Greg Malysa Signed-off-by: Greg Malysa --- drivers/pinctrl/Kconfig | 12 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-adsp.c | 919 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 932 insertions(+) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 7e4f93a3bc7ac9bcafc92ddb795569d7cca6474d..ffc0946c5b416c29803e195016867aee8f09afe1 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -31,6 +31,18 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_ADSP + bool "ADSP-SC5XX pinctrl driver" + depends on ARCH_SC59X_64 + depends on OF + select PINMUX + select GPIOLIB + select GENERIC_PINCONF + help + Say Y here to enable the ADSP-SC5XX pinctrl driver. This is required for + correct peripheral functionality on the SoC. + + config PINCTRL_AMD bool "AMD GPIO pin control" depends on HAS_IOMEM diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index cc809669405ab6c6905fe0b2380f91b211a2d470..6b340bf0ee8c0267cbbdee3d14db605a340433c6 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PINCONF) += pinconf.o obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_OF) += devicetree.o +obj-$(CONFIG_PINCTRL_ADSP) += pinctrl-adsp.o obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o diff --git a/drivers/pinctrl/pinctrl-adsp.c b/drivers/pinctrl/pinctrl-adsp.c new file mode 100644 index 0000000000000000000000000000000000000000..ce86e579e5601203a446c09b5b5f7f60aba6d02a --- /dev/null +++ b/drivers/pinctrl/pinctrl-adsp.c @@ -0,0 +1,919 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Analog Devices ADSP family pinctrl driver. + * + * Copyright 2022-2024 - Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinconf.h" +#include "pinctrl-utils.h" + +/* Convert from pinmux constants in device tree to actual settings */ +#define ADSP_PINMUX_PIN(p) ((p & 0xffffff00) >> 8) +#define ADSP_PINMUX_FUNC(p) (p & 0xff) + +/* Details of the PORT_MUX register */ +#define ADSP_PORT_PORT_MUX_BITS 2 +#define ADSP_PORT_PORT_MUX_MASK GENMASK(1, 0) + +/* Number of pin alternate functions, see pin_functions array */ +#define ADSP_NUMBER_OF_PIN_FUNCTIONS ARRAY_SIZE(pin_functions) + +/* Information for drive strength registers */ +#define ADSP_PADS_DS_BITS 3 +#define ADSP_PADS_DS_PINS_PER_REG 8 +#define ADSP_PADS_DS_HIGH 2 +#define ADSP_PADS_DS_LOW 1 + +/* Information for pull up/pull down enable registers */ +#define ADSP_PADS_PUD_PINS_PER_REG 16 + +#define ADSP_PADS_REG_PCFG0 0x04 +#define ADSP_PADS_REG_PCFG1 0x08 +/* Convert from pin number (e.g. 0-143) to drive strength register offset */ +#define ADSP_PADS_PORTx_DS(p) (0x0c + 0x04*(p/ADSP_PADS_DS_PINS_PER_REG)) +#define ADSP_PADS_NONPORTS_DS 0x50 +/* Convert from pin number to pull up enable register offset */ +#define ADSP_PADS_PORTx_PUE(p) (0x98 + 0x04*(p/ADSP_PADS_PUD_PINS_PER_REG)) +/* Convert from pin number to pull down enable register offset */ +#define ADSP_PADS_PORTx_PDE(p) (0xc4 + 0x04*(p/ADSP_PADS_PUD_PINS_PER_REG)) + +/* Non GPIO PORT drive strength settings */ +#define ADSP_NONPORTS_DS_CKOUT 0 +#define ADSP_NONPORTS_DS_RESOUTB 1 +#define ADSP_NONPORTS_DS_FAULTB 2 +#define ADSP_NONPORTS_DS_LP1CK 3 +#define ADSP_NONPORTS_DS_LP0CK 4 +#define ADSP_NONPORTS_DS_OSPI 5 + +/* DAI pad configuration offsets */ +#define ADSP_PADS_REG_DAI0_0_DS 0x78 +#define ADSP_PADS_REG_DAI0_1_DS 0x7c +#define ADSP_PADS_REG_DAI1_0_DS 0x80 +#define ADSP_PADS_REG_DAI1_1_DS 0x84 + +#define ADSP_PADS_REG_DAI0_PUE 0xbc +#define ADSP_PADS_REG_DAI1_PUE 0xc0 +#define ADSP_PADS_REG_DAI0_PDE 0xfc +#define ADSP_PADS_REG_DAI1_PDE 0x100 + +/* + * Represents a function setting for pins, controls the mux modes essentially + */ +struct adsp_pin_function { + const char *name; + /* 0 for gpio, 1-4 for alt functions 0-3 */ + uint8_t mode; +}; + +/* + * Available pin function settings in the pin mux for GPIO-associated pins + */ +static const struct adsp_pin_function pin_functions[] = { + { + .name = "gpio", + .mode = 0, + }, { + .name = "alt0", + .mode = 1, + }, { + .name = "alt1", + .mode = 2, + }, { + .name = "alt2", + .mode = 3, + }, { + .name = "alt3", + .mode = 4, + } +}; + +/* + * One pinctrl instance per chip, unifies the interface to the port mux and pad + * conf registers in the PORT instances + * @todo pads registers should be routed through system configuration abstraction + * to remove the need for feature testing/listing "missing" registers here + */ +struct adsp_pinctrl { + struct device *dev; + struct pinctrl_dev *pin_dev; + void __iomem *regs; + const char **group_names; + unsigned int *pins; + spinlock_t lock; + size_t num_ports; + uint32_t *pin_counts; + uint32_t total_pins; + + /* Are the drive strength registers missing on this part? */ + bool ds_missing; + + /* Are the pull up/down enable registers missing on this part? */ + bool pude_missing; +}; + +/* + * Custom pinconf properties + */ +#define ADSP_PIN_CONFIG_TRU_TOGGLE (PIN_CONFIG_END+1) + +static const struct pinconf_generic_params adsp_custom_bindings[] = { + /* Configure this pin as a toggle pin which flip each time a trigger event + * is received by the pin controller from the TRU + */ + {"adi,tru-toggle", ADSP_PIN_CONFIG_TRU_TOGGLE, 0} +}; + +static const struct pin_config_item adsp_conf_items[] = { + PCONFDUMP(ADSP_PIN_CONFIG_TRU_TOGGLE, "tru-toggle", NULL, false), +}; + +/* does not need lock */ +static void adsp_set_pin_gpio(struct adsp_gpio_port *port, unsigned int offset, bool gpio) +{ + if (gpio) + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_FER_CLEAR); + else + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_FER_SET); +} + +/* + * Configure a pin either for gpio or an alternate function + */ +static void adsp_portmux_setup(struct adsp_gpio_port *port, unsigned int offset, + const struct adsp_pin_function *func) +{ + if (func->mode == 0) { + adsp_set_pin_gpio(port, offset, true); + } else { + unsigned long flags; + u32 val; + u32 f = (func->mode - 1) & ADSP_PORT_PORT_MUX_MASK; + + spin_lock_irqsave(&port->lock, flags); + + val = __adsp_gpio_readl(port, ADSP_PORT_REG_PORT_MUX); + val &= ~(ADSP_PORT_PORT_MUX_MASK << (ADSP_PORT_PORT_MUX_BITS * offset)); + val |= f << (ADSP_PORT_PORT_MUX_BITS * offset); + __adsp_gpio_writel(port, val, ADSP_PORT_REG_PORT_MUX); + + spin_unlock_irqrestore(&port->lock, flags); + + adsp_set_pin_gpio(port, offset, false); + } +} + +/* pin control operations */ +static int adsp_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return adsp_pinctrl->total_pins; +} + +static const char *adsp_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + + return adsp_pinctrl->group_names[selector]; +} + +static int adsp_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector, + const unsigned int **pins, unsigned int *num_pins) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + *pins = &adsp_pinctrl->pins[selector]; + *num_pins = 1; + return 0; +} + +static int adsp_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, struct pinctrl_map **map, unsigned int *reserved_maps, + unsigned int *num_maps) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + //struct property *prop; + const char *group; + unsigned long *configs; + unsigned int num_configs, num_pins; + unsigned int reserve = 0; + //uint32_t pinmux; + //const __be32 *p; + u32 array[2]; + int sz, i; + int ret; + + num_pins = of_property_count_u32_elems(np, "pinmux"); + if (num_pins <= 0) { + dev_err(adsp_pinctrl->dev, "Must have at least one `pinmux` entry in %pOFn.\n", + np); + return -EINVAL; + } + + ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &num_configs); + if (ret) + return ret; + + /* One configuration for the whole group, potentially */ + reserve = num_pins; + if (num_configs) + reserve = reserve * 2; + + ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps, reserve); + if (ret) + goto exit; + + sz = of_property_read_variable_u32_array(np, "pinmux", array, 2, 2); + sz = (sz == -EINVAL) ? 0 : sz; /* Missing property is OK */ + if (sz < 0) + return dev_err_probe(adsp_pinctrl->dev, sz, "invalid pinmux\n"); + + + for (i = 0; i < sz; i += 2) { + u32 pin = array[i]; + u32 func = array[i + 1]; + + if (func >= ADSP_NUMBER_OF_PIN_FUNCTIONS) { + dev_err(adsp_pinctrl->dev, + "Function number %d is not available for pin %d in %pOFn.n\n", + func, pin, np); + goto exit; + } + + group = adsp_pinctrl->group_names[pin]; + ret = pinctrl_utils_add_map_mux(pctldev, map, reserved_maps, num_maps, + group, pin_functions[func].name); + if (ret) + goto exit; + + if (num_configs) { + ret = pinctrl_utils_add_map_configs(pctldev, map, reserved_maps, num_maps, + group, configs, num_configs, PIN_MAP_TYPE_CONFIGS_GROUP); + if (ret) + goto exit; + } + } + + ret = 0; +exit: + kfree(configs); + return ret; +} + +/** + * Handle device tree structures like: + * + * pinctrl_uart0_hwflow: uart0_hwflow_pins { + * pins_rxtx_ { + * pinmux = <1>, <2>; + * some-padconf-flag; + * }; + * pins_hwflow { + * pinmux = <3>, <4>; + * some-other-padconf-flag; + * }; + * }; + * + * where &pinctrl_uart0_hwflow is passed as an entry in pinctrl-0 on uart driver and + * enables all sub-pins at once + */ +static int adsp_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, struct pinctrl_map **map, unsigned int *num_maps) +{ + unsigned int reserved_maps; + struct device_node *child_np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np, child_np) { + ret = adsp_pinctrl_dt_subnode_to_map(pctldev, child_np, map, + &reserved_maps, num_maps); + if (ret < 0) + goto exit; + } + return 0; + +exit: + pinctrl_utils_free_map(pctldev, *map, *num_maps); + return ret; +} + +static const struct pinctrl_ops adsp_pctlops = { + .get_groups_count = adsp_pinctrl_get_groups_count, + .get_group_name = adsp_pinctrl_get_group_name, + .get_group_pins = adsp_pinctrl_get_group_pins, + .dt_node_to_map = adsp_pinctrl_dt_node_to_map, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +/* pin mux operations */ +static int adsp_pinmux_get_functions_count(struct pinctrl_dev *pctldev) +{ + return ADSP_NUMBER_OF_PIN_FUNCTIONS; +} + +static const char *adsp_pinmux_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return pin_functions[selector].name; +} + +static int adsp_pinmux_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, const char * const **groups, unsigned * const num_groups) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = adsp_pinctrl->group_names; + *num_groups = adsp_pinctrl->total_pins; + return 0; +} + +/* Each group is exactly 1 pin and group id == pin id */ +static int adsp_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int func, + unsigned int group) +{ + struct adsp_gpio_port *port; + struct pinctrl_gpio_range *range; + u32 offset; + + range = pinctrl_find_gpio_range_from_pin(pctldev, group); + if (!range || !range->gc) + return -EPROBE_DEFER; + + offset = group - range->pin_base; + + port = to_adsp_gpio_port(range->gc); + adsp_portmux_setup(port, offset, &pin_functions[func]); + + return 0; +} + +static int adsp_pinmux_request_gpio(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned int pin) +{ + struct adsp_gpio_port *port = to_adsp_gpio_port(range->gc); + u32 offset = pin - range->pin_base; + + adsp_set_pin_gpio(port, offset, true); + return 0; +} + +static void adsp_pinmux_release_gpio(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned int pin) +{ + struct adsp_gpio_port *port = to_adsp_gpio_port(range->gc); + u32 offset = pin - range->pin_base; + + adsp_set_pin_gpio(port, offset, false); +} + +static const struct pinmux_ops adsp_pmxops = { + .get_functions_count = adsp_pinmux_get_functions_count, + .get_function_name = adsp_pinmux_get_function_name, + .get_function_groups = adsp_pinmux_get_function_groups, + .set_mux = adsp_pinmux_set_mux, + .gpio_request_enable = adsp_pinmux_request_gpio, + .gpio_disable_free = adsp_pinmux_release_gpio, +}; + +/* pin configuration operations */ +static bool __adsp_pinconf_is_pue(struct adsp_pinctrl *p, unsigned int pin) +{ + u32 offset = ADSP_PADS_PORTx_PUE(pin); + u32 val, bit; + + if (p->pude_missing) + return 0; + + val = readl(p->regs + offset); + bit = BIT(pin & (ADSP_PADS_PUD_PINS_PER_REG-1)); + return !!(val & bit); +} + +static bool __adsp_pinconf_is_pde(struct adsp_pinctrl *p, unsigned int pin) +{ + u32 offset = ADSP_PADS_PORTx_PDE(pin); + u32 val, bit; + + if (p->pude_missing) + return 0; + + val = readl(p->regs + offset); + bit = BIT(pin & (ADSP_PADS_PUD_PINS_PER_REG-1)); + return !!(val & bit); +} + +static u32 __adsp_pinconf_get_ds(struct adsp_pinctrl *p, unsigned int pin) +{ + u32 offset = ADSP_PADS_PORTx_DS(pin); + u32 val, shift, mask; + + if (p->ds_missing) + return 0; + + val = readl(p->regs + offset); + shift = (pin & (ADSP_PADS_DS_PINS_PER_REG-1)) * ADSP_PADS_DS_BITS; + mask = GENMASK(ADSP_PADS_DS_BITS-1, 0) << shift; + val = val & mask; + + if (val == ADSP_PADS_DS_HIGH) + return 1; + return 0; +} + +/* seems we return -EINVAL for disabled static option, -ENOTSUPP for not supported, + * and otherwise the argument is included in config + */ +static int adsp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + struct pinctrl_gpio_range *range; + struct adsp_gpio_port *port; + u32 offset, val; + u32 param = pinconf_to_config_param(*config); + u32 arg = 0; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (__adsp_pinconf_is_pue(adsp_pinctrl, pin) || + __adsp_pinconf_is_pde(adsp_pinctrl, pin)) + return -EINVAL; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + if (!__adsp_pinconf_is_pde(adsp_pinctrl, pin)) + return -EINVAL; + break; + case PIN_CONFIG_BIAS_PULL_UP: + if (!__adsp_pinconf_is_pue(adsp_pinctrl, pin)) + return -EINVAL; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = __adsp_pinconf_get_ds(adsp_pinctrl, pin); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + if (!(port->open_drain & BIT(offset))) + return -EINVAL; + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + if (port->open_drain & BIT(offset)) + return -EINVAL; + break; + case ADSP_PIN_CONFIG_TRU_TOGGLE: + range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + val = __adsp_gpio_readl(port, ADSP_PORT_REG_TRIG_TGL); + if (!(val & BIT(offset))) + return -EINVAL; + break; + default: + return -EOPNOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static void __adsp_pinconf_pue(struct adsp_pinctrl *p, unsigned int pin, bool state) +{ + u32 offset = ADSP_PADS_PORTx_PUE(pin); + u32 val, bit; + + if (p->pude_missing) { + dev_warn(p->dev, + "Pull Up Enable is not supported by this PADS HW (tried to set PUE for pin %d)\n", + pin); + return; + } + + val = readl(p->regs + offset); + bit = BIT(pin & (ADSP_PADS_PUD_PINS_PER_REG-1)); + + if (state) + writel(val | bit, p->regs + offset); + else + writel(val & ~bit, p->regs + offset); +} + +static void __adsp_pinconf_pde(struct adsp_pinctrl *p, unsigned int pin, bool state) +{ + u32 offset = ADSP_PADS_PORTx_PDE(pin); + u32 val, bit; + + if (p->pude_missing) { + dev_warn(p->dev, + "Pull Down Enable is not supported by this PADS HW (tried to set PDE for pin %d)\n", + pin); + return; + } + + val = readl(p->regs + offset); + bit = BIT(pin & (ADSP_PADS_PUD_PINS_PER_REG-1)); + + if (state) + writel(val | bit, p->regs + offset); + else + writel(val & ~bit, p->regs + offset); +} + +static void __adsp_pinconf_ds(struct adsp_pinctrl *p, unsigned int pin, bool high) +{ + u32 offset = ADSP_PADS_PORTx_DS(pin); + u32 val, shift, mask; + + if (p->ds_missing) { + dev_warn(p->dev, + "Drive strength is not supported by this PADS HW (tried to set drive strength for pin %d)\n", + pin); + return; + } + + val = readl(p->regs + offset); + shift = (pin & (ADSP_PADS_DS_PINS_PER_REG-1)) * ADSP_PADS_DS_BITS; + mask = GENMASK(ADSP_PADS_DS_BITS-1, 0) << shift; + val = val & ~mask; + + if (high) + writel(val | (ADSP_PADS_DS_HIGH << shift), p->regs + offset); + else + writel(val | (ADSP_PADS_DS_LOW << shift), p->regs + offset); +} + +static int adsp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config, unsigned int num_configs) +{ + struct adsp_pinctrl *adsp_pinctrl = pinctrl_dev_get_drvdata(pctldev); + struct pinctrl_gpio_range *range; + struct adsp_gpio_port *port; + u32 param, arg, val; + u32 offset; + int cfg; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&adsp_pinctrl->lock, flags); + + for (cfg = 0; cfg < num_configs; ++cfg) { + param = pinconf_to_config_param(config[cfg]); + arg = pinconf_to_config_argument(config[cfg]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + __adsp_pinconf_pue(adsp_pinctrl, pin, false); + __adsp_pinconf_pde(adsp_pinctrl, pin, false); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + __adsp_pinconf_pde(adsp_pinctrl, pin, !!arg); + break; + case PIN_CONFIG_BIAS_PULL_UP: + __adsp_pinconf_pue(adsp_pinctrl, pin, !!arg); + break; + case PIN_CONFIG_DRIVE_STRENGTH: + /* This only supports high/low-speed drive strength (see HRM) + * so assume any positive value means we would like high-speed strength + */ + __adsp_pinconf_ds(adsp_pinctrl, pin, !!arg); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + range = pinctrl_find_gpio_range_from_pin(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + spin_lock(&port->lock); + val = __adsp_gpio_readw(port, ADSP_PORT_REG_DATA); + val &= BIT(offset); + + if (val) { + /* open drain with value of 1 => configure as input */ + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_DIR_CLEAR); + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_INEN_SET); + } else { + /* open drain with value of 0 => configure as output, drive 0 */ + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_INEN_CLEAR); + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_DATA_CLEAR); + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_DIR_SET); + } + + port->open_drain |= BIT(offset); + spin_unlock(&port->lock); + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + range = pinctrl_find_gpio_range_from_pin(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + spin_lock(&port->lock); + + /* + * by default make the pin an input when exiting open drain mode; + * user can correct later with GPIO in/out configuration + */ + if (port->open_drain & BIT(offset)) { + port->open_drain &= ~BIT(offset); + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_DIR_CLEAR); + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_INEN_SET); + } + + spin_unlock(&port->lock); + break; + case ADSP_PIN_CONFIG_TRU_TOGGLE: + range = pinctrl_find_gpio_range_from_pin(pctldev, pin); + offset = pin - range->pin_base; + port = to_adsp_gpio_port(range->gc); + + spin_lock(&port->lock); + val = __adsp_gpio_readl(port, ADSP_PORT_REG_TRIG_TGL); + val |= BIT(offset); + __adsp_gpio_writel(port, val, ADSP_PORT_REG_TRIG_TGL); + spin_unlock(&port->lock); + break; + default: + ret = -EOPNOTSUPP; + goto end; + } + } + +end: + spin_unlock_irqrestore(&adsp_pinctrl->lock, flags); + return ret; +} + +/* Config for all pins must match or we have an error regarding group structure */ +static int adsp_pinconf_group_get(struct pinctrl_dev *pctldev, unsigned int group, + unsigned long *config) +{ + const unsigned int *pins; + unsigned int npins, i; + unsigned long first; + int ret; + + ret = adsp_pinctrl_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; ++i) { + ret = adsp_pinconf_get(pctldev, pins[i], config); + if (ret) + return ret; + + if (i == 0) + first = *config; + + if (first != *config) + return -EOPNOTSUPP; + } + + return 0; +} + +static int adsp_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned int group, + unsigned long *configs, unsigned int num_configs) +{ + const unsigned int *pins; + unsigned int npins, i; + int ret; + + ret = adsp_pinctrl_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; ++i) { + ret = adsp_pinconf_set(pctldev, pins[i], configs, num_configs); + if (ret) + return ret; + } + + return 0; +} + +static const struct pinconf_ops adsp_confops = { + .is_generic = true, + .pin_config_get = adsp_pinconf_get, + .pin_config_set = adsp_pinconf_set, + .pin_config_group_get = adsp_pinconf_group_get, + .pin_config_group_set = adsp_pinconf_group_set, +#ifdef CONFIG_DEBUG_FS + .pin_config_config_dbg_show = pinconf_generic_dump_config, +#endif +}; + +/* + * We want to make one group per pin so that we can refer to the pins by group + * later on when mux assignments are made + */ +static int adsp_pinctrl_init_groups(struct adsp_pinctrl *adsp_pinctrl, + struct pinctrl_desc *desc) +{ + struct device *dev = adsp_pinctrl->dev; + struct pinctrl_pin_desc *all_pins; + size_t port, pin; + unsigned int i, pin_total; + int num_ports; + int ret; + + num_ports = of_property_count_u32_elems(dev->of_node, "adi,port-sizes"); + + if (num_ports < 0) + return num_ports; + + if (num_ports == 0) { + dev_err(dev, "pinctrl missing `adi,port-sizes` port size definition\n"); + return -ENOENT; + } + + adsp_pinctrl->num_ports = num_ports; + + adsp_pinctrl->pin_counts = devm_kcalloc(dev, sizeof(*adsp_pinctrl->pin_counts), + num_ports, GFP_KERNEL); + if (!adsp_pinctrl->pin_counts) + return -ENOMEM; + + ret = of_property_read_u32_array(dev->of_node, "adi,port-sizes", + adsp_pinctrl->pin_counts, num_ports); + if (ret) + return ret; + + pin_total = 0; + + for (i = 0; i < num_ports; ++i) + pin_total += adsp_pinctrl->pin_counts[i]; + + adsp_pinctrl->total_pins = pin_total; + + all_pins = devm_kcalloc(dev, sizeof(*all_pins), adsp_pinctrl->total_pins, + GFP_KERNEL); + + adsp_pinctrl->pins = devm_kcalloc(dev, sizeof(adsp_pinctrl->pins), + adsp_pinctrl->total_pins, GFP_KERNEL); + if (!adsp_pinctrl->pins) + return -ENOMEM; + + adsp_pinctrl->group_names = devm_kcalloc(dev, sizeof(*adsp_pinctrl->group_names), + adsp_pinctrl->total_pins, GFP_KERNEL); + if (!adsp_pinctrl->group_names) + return -ENOMEM; + + i = 0; + for (port = 0; port < adsp_pinctrl->num_ports; ++port) { + for (pin = 0; pin < adsp_pinctrl->pin_counts[port]; ++pin) { + adsp_pinctrl->group_names[i] = devm_kasprintf(dev, GFP_KERNEL, + "p%c%zu", (char) ('A' + port), pin); + adsp_pinctrl->pins[i] = i; + + all_pins[i].name = adsp_pinctrl->group_names[i]; + all_pins[i].number = i; + i += 1; + } + } + + desc->pins = all_pins; + desc->npins = adsp_pinctrl->total_pins; + + return 0; +} + +static void adsp_set_nongpio_ds(struct adsp_pinctrl *p, int type, bool high) +{ + u32 val = readl(p->regs + ADSP_PADS_NONPORTS_DS); + u32 shift = ADSP_PADS_DS_BITS * type; + u32 mask = GENMASK(ADSP_PADS_DS_BITS-1, 0) << shift; + + val = val & ~mask; + + if (high) + writel(val | (ADSP_PADS_DS_HIGH << shift), p->regs + ADSP_PADS_NONPORTS_DS); + else + writel(val | (ADSP_PADS_DS_LOW << shift), p->regs + ADSP_PADS_NONPORTS_DS); +} + +static int adsp_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct adsp_pinctrl *adsp_pinctrl; + struct pinctrl_desc *pnctrl_desc; + struct resource *res; + u32 val; + int ret; + + adsp_pinctrl = devm_kzalloc(dev, sizeof(*adsp_pinctrl), GFP_KERNEL); + if (!adsp_pinctrl) + return -ENOMEM; + + adsp_pinctrl->dev = dev; + pnctrl_desc = devm_kzalloc(dev, sizeof(*pnctrl_desc), GFP_KERNEL); + if (!pnctrl_desc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adsp_pinctrl->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(adsp_pinctrl->regs)) + return PTR_ERR(adsp_pinctrl->regs); + + /* Different features are available in different hw revisions; no way to read this + * from an ID register so the missing features need to be specified in dts + */ + adsp_pinctrl->ds_missing = of_property_read_bool(np, "adi,no-drive-strength"); + adsp_pinctrl->pude_missing = of_property_read_bool(np, "adi,no-pull-up-down"); + + /* Only if requested, adjust non-port drive strengths */ + ret = of_property_read_u32(np, "adi,clkout-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_CKOUT, !!val); + + ret = of_property_read_u32(np, "adi,resoutb-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_RESOUTB, !!val); + + ret = of_property_read_u32(np, "adi,faultb-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_FAULTB, !!val); + + ret = of_property_read_u32(np, "adi,lp1ck-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_LP1CK, !!val); + + ret = of_property_read_u32(np, "adi,lp0ck-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_LP0CK, !!val); + + ret = of_property_read_u32(np, "adi,ospi-drive-strength", &val); + if (!ret) + adsp_set_nongpio_ds(adsp_pinctrl, ADSP_NONPORTS_DS_OSPI, !!val); + + pnctrl_desc->name = dev_name(dev); + pnctrl_desc->pctlops = &adsp_pctlops; + pnctrl_desc->confops = &adsp_confops; + pnctrl_desc->pmxops = &adsp_pmxops; + pnctrl_desc->owner = THIS_MODULE; + pnctrl_desc->num_custom_params = ARRAY_SIZE(adsp_custom_bindings); + pnctrl_desc->custom_params = adsp_custom_bindings; + pnctrl_desc->custom_conf_items = adsp_conf_items; + + spin_lock_init(&adsp_pinctrl->lock); + ret = adsp_pinctrl_init_groups(adsp_pinctrl, pnctrl_desc); + if (ret) + return ret; + + ret = devm_pinctrl_register_and_init(dev, pnctrl_desc, adsp_pinctrl, + &adsp_pinctrl->pin_dev); + if (ret) + return ret; + + platform_set_drvdata(pdev, adsp_pinctrl); + ret = pinctrl_enable(adsp_pinctrl->pin_dev); + return ret; +} + +static const struct of_device_id adsp_pinctrl_of_match[] = { + { .compatible = "adi,adsp-pinctrl", }, + { }, +}; +MODULE_DEVICE_TABLE(of, adsp_pinctrl_of_match); + +static struct platform_driver adsp_pinctrl_driver = { + .driver = { + .name = "adsp-pinctrl", + .of_match_table = adsp_pinctrl_of_match, + .suppress_bind_attrs = true, + }, + .probe = adsp_pinctrl_probe, +}; + +static int __init adsp_pinctrl_init(void) +{ + return platform_driver_register(&adsp_pinctrl_driver); +} + +/* + * We want the pinctrl driver to be available at arch init time not at the + * later device init time + */ +arch_initcall(adsp_pinctrl_init); + +MODULE_AUTHOR("Greg Malysa "); +MODULE_DESCRIPTION("Analog Devices Pinctrl driver"); +MODULE_LICENSE("GPL v2"); \ No newline at end of file