diff mbox series

[v3,09/11] riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree

Message ID 20240703-k1-01-basic-dt-v3-9-12f73b47461e@gentoo.org
State Superseded
Headers show
Series riscv: add initial support for SpacemiT K1 | expand

Commit Message

Yixun Lan July 3, 2024, 2:55 p.m. UTC
From: Yangyu Chen <cyy@cyyself.name>

Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it
design with SpacemiT K1 8 core RISC-V chip [2].

Currently only support booting into console with only uart enabled,
other features will be added soon later.

Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [1]
Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
---
 arch/riscv/boot/dts/Makefile                    |  1 +
 arch/riscv/boot/dts/spacemit/Makefile           |  2 ++
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 19 +++++++++++++++++++
 3 files changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index fdae05bbf5563..bff887d38abe4 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -5,6 +5,7 @@  subdir-y += microchip
 subdir-y += renesas
 subdir-y += sifive
 subdir-y += sophgo
+subdir-y += spacemit
 subdir-y += starfive
 subdir-y += thead
 
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
new file mode 100644
index 0000000000000..ac617319a5742
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -0,0 +1,2 @@ 
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
new file mode 100644
index 0000000000000..023274189b492
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -0,0 +1,19 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ */
+
+#include "k1.dtsi"
+
+/ {
+	model = "Banana Pi BPI-F3";
+	compatible = "bananapi,bpi-f3", "spacemit,k1";
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};