| Message ID | 20231214105243.3707730-9-tudor.ambarus@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | GS101 Oriole: CMU_PERIC0 support and USI updates | expand |
On Thu, Dec 14, 2023 at 4:52 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote: > > Enable the cmu-peric0 clock controller. It feeds USI and I3c. > > Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> > --- > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > index 9747cb3fa03a..d0b0ad70c6ba 100644 > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > @@ -339,6 +339,18 @@ ppi_cluster2: interrupt-partition-2 { > }; > }; > > + cmu_peric0: clock-controller@10800000 { > + compatible = "google,gs101-cmu-peric0"; > + reg = <0x10800000 0x4000>; > + #clock-cells = <1>; > + clocks = <&ext_24_5m>, > + <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, > + <&cmu_top CLK_DOUT_CMU_PERIC0_IP>; > + clock-names = "oscclk", > + "dout_cmu_peric0_bus", I'd pull this line to the above line. Other than that: Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > + "dout_cmu_peric0_ip"; > + }; > + > sysreg_peric0: syscon@10820000 { > compatible = "google,gs101-peric0-sysreg", "syscon"; > reg = <0x10820000 0x10000>; > -- > 2.43.0.472.g3155946c3a-goog >
On 14/12/2023 16:39, Sam Protsenko wrote: > On Thu, Dec 14, 2023 at 4:52 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote: >> >> Enable the cmu-peric0 clock controller. It feeds USI and I3c. >> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> >> --- >> arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi >> index 9747cb3fa03a..d0b0ad70c6ba 100644 >> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi >> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi >> @@ -339,6 +339,18 @@ ppi_cluster2: interrupt-partition-2 { >> }; >> }; >> >> + cmu_peric0: clock-controller@10800000 { >> + compatible = "google,gs101-cmu-peric0"; >> + reg = <0x10800000 0x4000>; >> + #clock-cells = <1>; >> + clocks = <&ext_24_5m>, >> + <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, >> + <&cmu_top CLK_DOUT_CMU_PERIC0_IP>; >> + clock-names = "oscclk", >> + "dout_cmu_peric0_bus", > > I'd pull this line to the above line. Other than that: > No, it's fine. If clocks span over multiple lines (one clock per line), the names should follow in general. It's easier to read and match entries. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 9747cb3fa03a..d0b0ad70c6ba 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -339,6 +339,18 @@ ppi_cluster2: interrupt-partition-2 { }; }; + cmu_peric0: clock-controller@10800000 { + compatible = "google,gs101-cmu-peric0"; + reg = <0x10800000 0x4000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>, + <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP>; + clock-names = "oscclk", + "dout_cmu_peric0_bus", + "dout_cmu_peric0_ip"; + }; + sysreg_peric0: syscon@10820000 { compatible = "google,gs101-peric0-sysreg", "syscon"; reg = <0x10820000 0x10000>;
Enable the cmu-peric0 clock controller. It feeds USI and I3c. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)