diff mbox series

[2/6] tty: serial: amba: Use BIT() macro for constant declarations

Message ID 20231026-mbly-uart-v1-2-9258eea297d3@bootlin.com
State New
Headers show
Series Cleanup AMBA PL011 driver | expand

Commit Message

Théo Lebrun Oct. 26, 2023, 10:41 a.m. UTC 
The driver uses bit shifts and hexadecimal expressions to declare
constants. Replace that with the BIT() macro that clarifies intent.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 include/linux/amba/serial.h | 182 ++++++++++++++++++++++----------------------
 1 file changed, 91 insertions(+), 91 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 27003ec52114..d926980478ed 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -70,64 +70,64 @@ 
 #define ZX_UART011_ICR		0x4c
 #define ZX_UART011_DMACR	0x50
 
-#define UART011_DR_OE		(1 << 11)
-#define UART011_DR_BE		(1 << 10)
-#define UART011_DR_PE		(1 << 9)
-#define UART011_DR_FE		(1 << 8)
-
-#define UART01x_RSR_OE		0x08
-#define UART01x_RSR_BE		0x04
-#define UART01x_RSR_PE		0x02
-#define UART01x_RSR_FE		0x01
-
-#define UART011_FR_RI		0x100
-#define UART011_FR_TXFE		0x080
-#define UART011_FR_RXFF		0x040
-#define UART01x_FR_TXFF		0x020
-#define UART01x_FR_RXFE		0x010
-#define UART01x_FR_BUSY		0x008
-#define UART01x_FR_DCD		0x004
-#define UART01x_FR_DSR		0x002
-#define UART01x_FR_CTS		0x001
+#define UART011_DR_OE		BIT(11)
+#define UART011_DR_BE		BIT(10)
+#define UART011_DR_PE		BIT(9)
+#define UART011_DR_FE		BIT(8)
+
+#define UART01x_RSR_OE		BIT(3)
+#define UART01x_RSR_BE		BIT(2)
+#define UART01x_RSR_PE		BIT(1)
+#define UART01x_RSR_FE		BIT(0)
+
+#define UART011_FR_RI		BIT(8)
+#define UART011_FR_TXFE		BIT(7)
+#define UART011_FR_RXFF		BIT(6)
+#define UART01x_FR_TXFF		BIT(5)
+#define UART01x_FR_RXFE		BIT(4)
+#define UART01x_FR_BUSY		BIT(3)
+#define UART01x_FR_DCD		BIT(2)
+#define UART01x_FR_DSR		BIT(1)
+#define UART01x_FR_CTS		BIT(0)
 #define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
 
 /*
  * Some bits of Flag Register on ZTE device have different position from
  * standard ones.
  */
-#define ZX_UART01x_FR_BUSY	0x100
-#define ZX_UART01x_FR_DSR	0x008
-#define ZX_UART01x_FR_CTS	0x002
-#define ZX_UART011_FR_RI	0x001
-
-#define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
-#define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
-#define UART011_CR_OUT2		0x2000	/* OUT2 */
-#define UART011_CR_OUT1		0x1000	/* OUT1 */
-#define UART011_CR_RTS		0x0800	/* RTS */
-#define UART011_CR_DTR		0x0400	/* DTR */
-#define UART011_CR_RXE		0x0200	/* receive enable */
-#define UART011_CR_TXE		0x0100	/* transmit enable */
-#define UART011_CR_LBE		0x0080	/* loopback enable */
-#define UART010_CR_RTIE		0x0040
-#define UART010_CR_TIE		0x0020
-#define UART010_CR_RIE		0x0010
-#define UART010_CR_MSIE		0x0008
-#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
-#define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
-#define UART01x_CR_SIREN	0x0002	/* SIR enable */
-#define UART01x_CR_UARTEN	0x0001	/* UART enable */
-
-#define UART011_LCRH_SPS	0x80
+#define ZX_UART01x_FR_BUSY	BIT(8)
+#define ZX_UART01x_FR_DSR	BIT(3)
+#define ZX_UART01x_FR_CTS	BIT(1)
+#define ZX_UART011_FR_RI	BIT(0)
+
+#define UART011_CR_CTSEN	BIT(15)	/* CTS hardware flow control */
+#define UART011_CR_RTSEN	BIT(14)	/* RTS hardware flow control */
+#define UART011_CR_OUT2		BIT(13)	/* OUT2 */
+#define UART011_CR_OUT1		BIT(12)	/* OUT1 */
+#define UART011_CR_RTS		BIT(11)	/* RTS */
+#define UART011_CR_DTR		BIT(10)	/* DTR */
+#define UART011_CR_RXE		BIT(9)	/* receive enable */
+#define UART011_CR_TXE		BIT(8)	/* transmit enable */
+#define UART011_CR_LBE		BIT(7)	/* loopback enable */
+#define UART010_CR_RTIE		BIT(6)
+#define UART010_CR_TIE		BIT(5)
+#define UART010_CR_RIE		BIT(4)
+#define UART010_CR_MSIE		BIT(3)
+#define ST_UART011_CR_OVSFACT	BIT(3)	/* Oversampling factor */
+#define UART01x_CR_IIRLP	BIT(2)	/* SIR low power mode */
+#define UART01x_CR_SIREN	BIT(1)	/* SIR enable */
+#define UART01x_CR_UARTEN	BIT(0)	/* UART enable */
+
+#define UART011_LCRH_SPS	BIT(7)
 #define UART01x_LCRH_WLEN_8	0x60
 #define UART01x_LCRH_WLEN_7	0x40
 #define UART01x_LCRH_WLEN_6	0x20
 #define UART01x_LCRH_WLEN_5	0x00
-#define UART01x_LCRH_FEN	0x10
-#define UART01x_LCRH_STP2	0x08
-#define UART01x_LCRH_EPS	0x04
-#define UART01x_LCRH_PEN	0x02
-#define UART01x_LCRH_BRK	0x01
+#define UART01x_LCRH_FEN	BIT(4)
+#define UART01x_LCRH_STP2	BIT(3)
+#define UART01x_LCRH_EPS	BIT(2)
+#define UART01x_LCRH_PEN	BIT(1)
+#define UART01x_LCRH_BRK	BIT(0)
 
 #define ST_UART011_DMAWM_RX_1	(0 << 3)
 #define ST_UART011_DMAWM_RX_2	(1 << 3)
@@ -144,10 +144,10 @@ 
 #define ST_UART011_DMAWM_TX_32	5
 #define ST_UART011_DMAWM_TX_48	6
 
-#define UART010_IIR_RTIS	0x08
-#define UART010_IIR_TIS		0x04
-#define UART010_IIR_RIS		0x02
-#define UART010_IIR_MIS		0x01
+#define UART010_IIR_RTIS	BIT(3)
+#define UART010_IIR_TIS		BIT(2)
+#define UART010_IIR_RIS		BIT(1)
+#define UART010_IIR_MIS		BIT(0)
 
 #define UART011_IFLS_RX1_8	(0 << 3)
 #define UART011_IFLS_RX2_8	(1 << 3)
@@ -163,45 +163,45 @@ 
 #define UART011_IFLS_RX_HALF	(5 << 3)
 #define UART011_IFLS_TX_HALF	(5 << 0)
 
-#define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
-#define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
-#define UART011_PEIM		(1 << 8)	/* parity error interrupt mask */
-#define UART011_FEIM		(1 << 7)	/* framing error interrupt mask */
-#define UART011_RTIM		(1 << 6)	/* receive timeout interrupt mask */
-#define UART011_TXIM		(1 << 5)	/* transmit interrupt mask */
-#define UART011_RXIM		(1 << 4)	/* receive interrupt mask */
-#define UART011_DSRMIM		(1 << 3)	/* DSR interrupt mask */
-#define UART011_DCDMIM		(1 << 2)	/* DCD interrupt mask */
-#define UART011_CTSMIM		(1 << 1)	/* CTS interrupt mask */
-#define UART011_RIMIM		(1 << 0)	/* RI interrupt mask */
-
-#define UART011_OEIS		(1 << 10)	/* overrun error interrupt status */
-#define UART011_BEIS		(1 << 9)	/* break error interrupt status */
-#define UART011_PEIS		(1 << 8)	/* parity error interrupt status */
-#define UART011_FEIS		(1 << 7)	/* framing error interrupt status */
-#define UART011_RTIS		(1 << 6)	/* receive timeout interrupt status */
-#define UART011_TXIS		(1 << 5)	/* transmit interrupt status */
-#define UART011_RXIS		(1 << 4)	/* receive interrupt status */
-#define UART011_DSRMIS		(1 << 3)	/* DSR interrupt status */
-#define UART011_DCDMIS		(1 << 2)	/* DCD interrupt status */
-#define UART011_CTSMIS		(1 << 1)	/* CTS interrupt status */
-#define UART011_RIMIS		(1 << 0)	/* RI interrupt status */
-
-#define UART011_OEIC		(1 << 10)	/* overrun error interrupt clear */
-#define UART011_BEIC		(1 << 9)	/* break error interrupt clear */
-#define UART011_PEIC		(1 << 8)	/* parity error interrupt clear */
-#define UART011_FEIC		(1 << 7)	/* framing error interrupt clear */
-#define UART011_RTIC		(1 << 6)	/* receive timeout interrupt clear */
-#define UART011_TXIC		(1 << 5)	/* transmit interrupt clear */
-#define UART011_RXIC		(1 << 4)	/* receive interrupt clear */
-#define UART011_DSRMIC		(1 << 3)	/* DSR interrupt clear */
-#define UART011_DCDMIC		(1 << 2)	/* DCD interrupt clear */
-#define UART011_CTSMIC		(1 << 1)	/* CTS interrupt clear */
-#define UART011_RIMIC		(1 << 0)	/* RI interrupt clear */
-
-#define UART011_DMAONERR	(1 << 2)	/* disable dma on error */
-#define UART011_TXDMAE		(1 << 1)	/* enable transmit dma */
-#define UART011_RXDMAE		(1 << 0)	/* enable receive dma */
+#define UART011_OEIM		BIT(10)	/* overrun error interrupt mask */
+#define UART011_BEIM		BIT(9)	/* break error interrupt mask */
+#define UART011_PEIM		BIT(8)	/* parity error interrupt mask */
+#define UART011_FEIM		BIT(7)	/* framing error interrupt mask */
+#define UART011_RTIM		BIT(6)	/* receive timeout interrupt mask */
+#define UART011_TXIM		BIT(5)	/* transmit interrupt mask */
+#define UART011_RXIM		BIT(4)	/* receive interrupt mask */
+#define UART011_DSRMIM		BIT(3)	/* DSR interrupt mask */
+#define UART011_DCDMIM		BIT(2)	/* DCD interrupt mask */
+#define UART011_CTSMIM		BIT(1)	/* CTS interrupt mask */
+#define UART011_RIMIM		BIT(0)	/* RI interrupt mask */
+
+#define UART011_OEIS		BIT(10)	/* overrun error interrupt status */
+#define UART011_BEIS		BIT(9)	/* break error interrupt status */
+#define UART011_PEIS		BIT(8)	/* parity error interrupt status */
+#define UART011_FEIS		BIT(7)	/* framing error interrupt status */
+#define UART011_RTIS		BIT(6)	/* receive timeout interrupt status */
+#define UART011_TXIS		BIT(5)	/* transmit interrupt status */
+#define UART011_RXIS		BIT(4)	/* receive interrupt status */
+#define UART011_DSRMIS		BIT(3)	/* DSR interrupt status */
+#define UART011_DCDMIS		BIT(2)	/* DCD interrupt status */
+#define UART011_CTSMIS		BIT(1)	/* CTS interrupt status */
+#define UART011_RIMIS		BIT(0)	/* RI interrupt status */
+
+#define UART011_OEIC		BIT(10)	/* overrun error interrupt clear */
+#define UART011_BEIC		BIT(9)	/* break error interrupt clear */
+#define UART011_PEIC		BIT(8)	/* parity error interrupt clear */
+#define UART011_FEIC		BIT(7)	/* framing error interrupt clear */
+#define UART011_RTIC		BIT(6)	/* receive timeout interrupt clear */
+#define UART011_TXIC		BIT(5)	/* transmit interrupt clear */
+#define UART011_RXIC		BIT(4)	/* receive interrupt clear */
+#define UART011_DSRMIC		BIT(3)	/* DSR interrupt clear */
+#define UART011_DCDMIC		BIT(2)	/* DCD interrupt clear */
+#define UART011_CTSMIC		BIT(1)	/* CTS interrupt clear */
+#define UART011_RIMIC		BIT(0)	/* RI interrupt clear */
+
+#define UART011_DMAONERR	BIT(2)	/* disable dma on error */
+#define UART011_TXDMAE		BIT(1)	/* enable transmit dma */
+#define UART011_RXDMAE		BIT(0)	/* enable receive dma */
 
 #define UART01x_RSR_ANY		(UART01x_RSR_OE | UART01x_RSR_BE | UART01x_RSR_PE | UART01x_RSR_FE)
 #define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD | UART01x_FR_DSR | UART01x_FR_CTS)