diff mbox series

[v4,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported

Message ID 20231018174840.28977-5-l.sanfilippo@kunbus.com
State Superseded
Headers show
Series Fixes and improvements for RS485 | expand

Commit Message

Lino Sanfilippo Oct. 18, 2023, 5:48 p.m. UTC 
Some uart drivers specify a rs485_config() function and then decide later
to disable RS485 support for some reason (e.g. imx and ar933).

In these cases userspace may be able to activate RS485 via TIOCSRS485
nevertheless, since in uart_set_rs485_config() an existing rs485_config()
function indicates that RS485 is supported.

Make sure that this is not longer possible by checking the uarts
rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not
set.

Furthermore instead of returning an empty structure return -ENOTTY if the
RS485 configuration is requested via TIOCGRS485 but RS485 is not supported.
This has a small impact on userspace visibility but it is consistent with
the -ENOTTY error for TIOCGRS485.

Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported")
Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 drivers/tty/serial/serial_core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f1d889f9fd6e..49dd5e864719 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1443,6 +1443,9 @@  static int uart_get_rs485_config(struct uart_port *port,
 	unsigned long flags;
 	struct serial_rs485 aux;
 
+	if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
+		return -ENOTTY;
+
 	spin_lock_irqsave(&port->lock, flags);
 	aux = port->rs485;
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -1460,7 +1463,7 @@  static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
 	int ret;
 	unsigned long flags;
 
-	if (!port->rs485_config)
+	if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
 		return -ENOTTY;
 
 	if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))