diff mbox series

[tty,v1,66/74] serial: sunplus-uart: Use port lock wrappers

Message ID 20230914183831.587273-67-john.ogness@linutronix.de
State New
Headers show
Series serial: wrappers for uart port lock | expand

Commit Message

John Ogness Sept. 14, 2023, 6:38 p.m. UTC 
From: Thomas Gleixner <tglx@linutronix.de>

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/tty/serial/sunplus-uart.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index 3aacd5eb414c..4251f4e1ba99 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -184,7 +184,7 @@  static void sunplus_break_ctl(struct uart_port *port, int ctl)
 	unsigned long flags;
 	unsigned int lcr;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 
 	lcr = readl(port->membase + SUP_UART_LCR);
 
@@ -195,7 +195,7 @@  static void sunplus_break_ctl(struct uart_port *port, int ctl)
 
 	writel(lcr, port->membase + SUP_UART_LCR);
 
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 }
 
 static void transmit_chars(struct uart_port *port)
@@ -277,7 +277,7 @@  static irqreturn_t sunplus_uart_irq(int irq, void *args)
 	struct uart_port *port = args;
 	unsigned int isc;
 
-	spin_lock(&port->lock);
+	uart_port_lock(port);
 
 	isc = readl(port->membase + SUP_UART_ISC);
 
@@ -287,7 +287,7 @@  static irqreturn_t sunplus_uart_irq(int irq, void *args)
 	if (isc & SUP_UART_ISC_TX)
 		transmit_chars(port);
 
-	spin_unlock(&port->lock);
+	uart_port_unlock(port);
 
 	return IRQ_HANDLED;
 }
@@ -302,14 +302,14 @@  static int sunplus_startup(struct uart_port *port)
 	if (ret)
 		return ret;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 	/* isc define Bit[7:4] int setting, Bit[3:0] int status
 	 * isc register will clean Bit[3:0] int status after read
 	 * only do a write to Bit[7:4] int setting
 	 */
 	isc |= SUP_UART_ISC_RXM;
 	writel(isc, port->membase + SUP_UART_ISC);
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 
 	return 0;
 }
@@ -318,13 +318,13 @@  static void sunplus_shutdown(struct uart_port *port)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 	/* isc define Bit[7:4] int setting, Bit[3:0] int status
 	 * isc register will clean Bit[3:0] int status after read
 	 * only do a write to Bit[7:4] int setting
 	 */
 	writel(0, port->membase + SUP_UART_ISC); /* disable all interrupt */
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 
 	free_irq(port->irq, port);
 }
@@ -372,7 +372,7 @@  static void sunplus_set_termios(struct uart_port *port,
 			lcr |= UART_LCR_EPAR;
 	}
 
-	spin_lock_irqsave(&port->lock, flags);
+	uart_port_lock_irqsave(port, &flags);
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
@@ -407,7 +407,7 @@  static void sunplus_set_termios(struct uart_port *port,
 	writel(div_l, port->membase + SUP_UART_DIV_L);
 	writel(lcr, port->membase + SUP_UART_LCR);
 
-	spin_unlock_irqrestore(&port->lock, flags);
+	uart_port_unlock_irqrestore(port, flags);
 }
 
 static void sunplus_set_ldisc(struct uart_port *port, struct ktermios *termios)
@@ -517,15 +517,15 @@  static void sunplus_console_write(struct console *co,
 	if (sunplus_console_ports[co->index]->port.sysrq)
 		locked = 0;
 	else if (oops_in_progress)
-		locked = spin_trylock(&sunplus_console_ports[co->index]->port.lock);
+		locked = uart_port_trylock(&sunplus_console_ports[co->index]->port);
 	else
-		spin_lock(&sunplus_console_ports[co->index]->port.lock);
+		uart_port_lock(&sunplus_console_ports[co->index]->port);
 
 	uart_console_write(&sunplus_console_ports[co->index]->port, s, count,
 			   sunplus_uart_console_putchar);
 
 	if (locked)
-		spin_unlock(&sunplus_console_ports[co->index]->port.lock);
+		uart_port_unlock(&sunplus_console_ports[co->index]->port);
 
 	local_irq_restore(flags);
 }