diff mbox series

[3/4] arm64: dts: imx93: use "fsl,imx8ulp-lpuart" compatible for imx93

Message ID 20230625094857.29644-4-sherry.sun@nxp.com
State Superseded
Headers show
Series correct the lpuart compatible for imx8dxl/imx8ulp/imx93 | expand

Commit Message

Sherry Sun June 25, 2023, 9:48 a.m. UTC 
i.MX93 is much more compatible with imx8ulp than imx7ulp, for example,
i.MX93 and i.MX8ulp can support EOP(end-of-packet) function while
i.MX7ulp doesn't support.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8643612ace8c..46fda327ae5e 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -252,7 +252,7 @@ 
 			};
 
 			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x44380000 0x1000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
@@ -261,7 +261,7 @@ 
 			};
 
 			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x44390000 0x1000>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
@@ -486,7 +486,7 @@ 
 			};
 
 			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x42570000 0x1000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
@@ -495,7 +495,7 @@ 
 			};
 
 			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x42580000 0x1000>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
@@ -504,7 +504,7 @@ 
 			};
 
 			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x42590000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
@@ -513,7 +513,7 @@ 
 			};
 
 			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x425a0000 0x1000>;
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
@@ -551,7 +551,7 @@ 
 			};
 
 			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x42690000 0x1000>;
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
@@ -560,7 +560,7 @@ 
 			};
 
 			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart";
 				reg = <0x426a0000 0x1000>;
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;