@@ -104,12 +104,12 @@ else:
examples:
- |
- serial@49042000 {
- compatible = "ti,omap3-uart";
- reg = <0x49042000 0x400>;
- interrupts = <80>;
- dmas = <&sdma 81 &sdma 82>;
- dma-names = "tx", "rx";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
+ serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
@@ -77,9 +77,9 @@ unevaluatedProperties: false
examples:
- |
serial@84c0 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x84c0 0x14>;
- interrupts = <26>;
- clocks = <&xtal>, <&pclk>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x84c0 0x14>;
+ interrupts = <26>;
+ clocks = <&xtal>, <&pclk>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
};
@@ -69,9 +69,9 @@ unevaluatedProperties: false
examples:
- |
uart0: serial@e0000000 {
- compatible = "xlnx,xuartps", "cdns,uart-r1p8";
- clocks = <&clkc 23>, <&clkc 40>;
- clock-names = "uart_clk", "pclk";
- reg = <0xE0000000 0x1000>;
- interrupts = <0 27 4>;
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 27 4>;
};
@@ -66,9 +66,9 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
uart0: serial@e1020000 {
- compatible = "renesas,em-uart";
- reg = <0xe1020000 0x38>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usia_u0_sclk>;
- clock-names = "sclk";
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
};
@@ -131,20 +131,20 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
aliases {
- serial1 = &hscif1;
+ serial1 = &hscif1;
};
hscif1: serial@e6550000 {
- compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
- "renesas,hscif";
- reg = <0xe6550000 96>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 519>;
- uart-has-rtscts;
+ compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0xe6550000 96>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ uart-has-rtscts;
};
@@ -91,19 +91,19 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
aliases {
- serial0 = &sci0;
+ serial0 = &sci0;
};
sci0: serial@1004d000 {
- compatible = "renesas,r9a07g044-sci", "renesas,sci";
- reg = <0x1004d000 0x400>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCI0_RST>;
+ compatible = "renesas,r9a07g044-sci", "renesas,sci";
+ reg = <0x1004d000 0x400>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCI0_RST>;
};
@@ -180,19 +180,19 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7791-sysc.h>
aliases {
- serial0 = &scif0;
+ serial0 = &scif0;
};
scif0: serial@e6e60000 {
- compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
- "renesas,scif";
- reg = <0xe6e60000 64>;
- interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
- <&scif_clk>;
- clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 721>;
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
+ reg = <0xe6e60000 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
};
@@ -95,18 +95,18 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7790-sysc.h>
aliases {
- serial0 = &scifa0;
+ serial0 = &scifa0;
};
scifa0: serial@e6c40000 {
- compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
- "renesas,scifa";
- reg = <0xe6c40000 64>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 204>;
- clock-names = "fck";
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 204>;
- dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
- dma-names = "tx", "rx", "tx", "rx";
+ compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+ "renesas,scifa";
+ reg = <0xe6c40000 64>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
};
@@ -94,10 +94,10 @@ examples:
#include <dt-bindings/clock/r8a7740-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
scifb: serial@e6c30000 {
- compatible = "renesas,scifb-r8a7740", "renesas,scifb";
- reg = <0xe6c30000 0x100>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
- clock-names = "fck";
- power-domains = <&pd_a3sp>;
+ compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+ reg = <0xe6c30000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "fck";
+ power-domains = <&pd_a3sp>;
};
@@ -141,13 +141,13 @@ additionalProperties: true
examples:
- |
serial@1234 {
- compatible = "ns16550a";
- reg = <0x1234 0x20>;
- interrupts = <1>;
-
- bluetooth {
- compatible = "brcm,bcm4330-bt";
- interrupt-parent = <&gpio>;
- interrupts = <10>;
- };
+ compatible = "ns16550a";
+ reg = <0x1234 0x20>;
+ interrupts = <1>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <10>;
+ };
};
@@ -53,13 +53,13 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/clock/sifive-fu540-prci.h>
- serial@10010000 {
+ #include <dt-bindings/clock/sifive-fu540-prci.h>
+ serial@10010000 {
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
interrupt-parent = <&plic0>;
interrupts = <80>;
reg = <0x10010000 0x1000>;
clocks = <&prci FU540_PRCI_CLK_TLCLK>;
- };
+ };
...
@@ -76,7 +76,7 @@ unevaluatedProperties: false
examples:
- |
- serial@800c0000 {
+ serial@800c0000 {
compatible = "xlnx,xps-uartlite-1.00.a";
reg = <0x800c0000 0x10000>;
interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
current-speed = <115200>;
xlnx,data-bits = <8>;
xlnx,use-parity = <0>;
- };
+ };
...
Adjust example DTS indentation to match recommended style of 4-spaces and use lower-case hex for address in reg. No functional change. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/serial/8250_omap.yaml | 18 ++++++------- .../bindings/serial/amlogic,meson-uart.yaml | 10 +++---- .../devicetree/bindings/serial/cdns,uart.yaml | 10 +++---- .../bindings/serial/renesas,em-uart.yaml | 10 +++---- .../bindings/serial/renesas,hscif.yaml | 26 +++++++++---------- .../bindings/serial/renesas,sci.yaml | 24 ++++++++--------- .../bindings/serial/renesas,scif.yaml | 24 ++++++++--------- .../bindings/serial/renesas,scifa.yaml | 22 ++++++++-------- .../bindings/serial/renesas,scifb.yaml | 12 ++++----- .../devicetree/bindings/serial/serial.yaml | 18 ++++++------- .../bindings/serial/sifive-serial.yaml | 6 ++--- .../bindings/serial/xlnx,opb-uartlite.yaml | 4 +-- 12 files changed, 92 insertions(+), 92 deletions(-)